MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by H11D1/D
H11D1 *
GlobalOptoisolator™
6-Pin DIP Optoisolators
High Voltage Transistor Output
(300 Volts)
The H11D1 and H11D2 consist of gallium arsenide infrared emitting diodes
optically coupled to high voltage, silicon, phototransistor detectors in a standard
6–pin DIP package. They are designed for high voltage applications and are
particularly useful in copy machines and solid state relays.
•
To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
•
Copy Machines
•
Interfacing and coupling systems of different potentials and impedances
•
Monitor and Detection Circuits
•
Solid State Relays
MAXIMUM RATINGS
(TA = 25°C unless otherwise noted)
Rating
INPUT LED
Forward Current — Continuous
Forward Current — Peak
Pulse Width = 1
µs,
330 pps
LED Power Dissipation @ TA = 25°C
Derate above 25°C
OUTPUT TRANSISTOR
Collector–Emitter Voltage
Emitter–Collector Voltage
Collector–Base Voltage
Collector Current — Continuous
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
TOTAL DEVICE
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
Operating Temperature Range(3)
Storage Temperature Range(3)
Soldering Temperature (10 s)
Isolation Surge Voltage
Peak ac Voltage, 60 Hz, 1 Second Duration(1)
1.
1.
2.
1.
3.
PD
TJ
Tstg
TL
VISO
250
2.94
– 55 to +100
– 55 to +150
260
7500
mW
mW/°C
°C
°C
°C
Vac(pk)
VCER
VECO
VCBO
IC
PD
300
7
300
100
150
1.76
Volts
Volts
Volts
mA
mW
mW/°C
IF
IF
PD
60
1.2
120
1.41
mA
Amps
mW
mW/°C
Symbol
Value
Unit
H11D2
[CTR = 20% Min]
*Motorola Preferred Device
STYLE 1 PLASTIC
6
1
STANDARD THRU HOLE
CASE 730A–04
SCHEMATIC
1
2
3
6
5
4
PIN 1.
2.
3.
4.
5.
6.
ANODE
CATHODE
N.C.
EMITTER
COLLECTOR
BASE
Isolation surge voltage is an internal device dielectric breakdown rating. For this test, Pins 1 and 2
are common, and Pins 4, 5 and 6 are common.
H11D1 is rated @ 5656 Volts peak (VISO). H11D2 is rated @ 3535 Volts peak (VISO)
Otherwise they are identical, both parts built by Motorola are rated @ 7500 Volts peak (VISO)
Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Preferred
devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
©
Motorola
Inc. 1995
Motorola,
Optoelectronics Device Data
1
MOTOROLA [ MOTOROLA, INC ]
