PS2505-1,-2,-4,PS2505L-1,-2,-4
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
• Time of temperature higher than 210
°C
• Number of reflows
• Flux
235
°C
(package surface temperature)
30 seconds or less
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (˚C)
(heating)
to 10 s
235 ˚C (peak temperature)
210 ˚C
to 30 s
120 to 160 ˚C
60 to 90 s
(preheating)
Time (s)
Caution
Avoid removing the residual flux with chlorine-based cleaning solvent after a reflow process.
Peak temperature 235 ˚C or below
(2) Dip soldering
• Temperature
• Time
• Number of times
• Flux
260
°C
or below (molten solder temperature)
10 seconds or less
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of
0.2 Wt % is recommended.)
10