SCXI Terminal Blocks
SCXI-1300........................................................................................................................777687-00
The SCXI-1300 connects input signals to the SCXI-1100, SCXI-1102/B/C, and SCXI-1104/C
modules. The SCXI-1300 is a general-purpose terminal block with an onboard temperature
sensor for cold-junction compensation. Also works with SCXI-1181 and SCXI-1181K modules.
SCXI-1301........................................................................................................................777687-01
20-screw terminal block for the SCXI-1140, SCXI-1181, and SCXI-1181K modules.
Figure 1. SCXI-1303 Terminal Block
SCXI-1302........................................................................................................................777687-02
50-screw terminal block for the SCXI-1180 feedthrough panel.
SCXI-1303 (see Figure 1) ................................................................................................777687-03
Terminal block for use with the SCXI-1100 and SCXI-1102/B/C modules. Designed especially for
high-accuracy thermocouple measurements, the SCXI-1303 includes isothermal construction
that minimizes errors caused by thermal gradients between terminals and the cold-junction
sensor. The SCXI-1303 also includes circuitry for open-thermocouple detection as well as
automatic ground referencing for floating (nongrounded) thermocouples.
Figure 2. SCXI-1305 Terminal Block
SCXI-1304........................................................................................................................777687-04
The SCXI-1304, for the SCXI-114x modules, includes AC coupling circuitry, with switches on
each channel. Each channel also includes a switchable connection to ground through a 100 kΩ
bias resistor to provide a reference for floating input sources.
SCXI-1305 (see Figure 2) ................................................................................................777687-05
Includes convenient BNC connectors for use with the SCXI-1120/D, SCXI-1121, SCXI-1125,
SCXI-1126, and SCXI-114x. Functionally equivalent to the SCXI-1304 terminal block, the
SCXI-1305 includes switchable AC coupling circuitry and ground referencing on each channel.
Figure 3. SCXI-1310 Connector and Shell Assembly
SCXI-1306........................................................................................................................779698-01
Terminal block for the SCXI-1503 RTD module. Provides 16 pairs of screw terminals for
differential input signals and 16 pairs of screw terminals for current excitation signals. You
can configure each channel for voltage or resistive measurements.
SCXI-1308........................................................................................................................777687-08
Current input terminal block for the SCXI-1100 and SCXI-1102/B/C analog input modules. Each
input includes a 249 Ω precision resistor so you can read 0 to 20 mA and 4 to 20 mA current
inputs.
SCXI-1310 (see Figure 3) ................................................................................................777687-10
Connector and shell assembly used to create custom cabling solutions from the SCXI-1100,
SCXI-1102/B/C, SCXI-1104/C, SCXI-114x, and SCXI-1181 to custom terminations. A low-cost
alternative to SCXI terminal blocks, it consists of a hardened plastic enclosure and one
connector with solder pins for signal connections.
SCXI-1313A ....................................................................................................................777687-13
Extends the input range of the SCXI-1125 to 150 Vrms or 150 VDC, on a per-channel basis
programmatically through software commands. The SCXI-1313A also includes an onboard
temperature sensor for thermocouples cold-junction compensation.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
3
NI [ National Instruments ]
