Compact FieldPoint LabVIEW Real-Time Controllers with Ethernet
Environmental
FieldPoint modules are intended for indoor use only. For outdoor use,
they must be installed in a suitable sealed enclosure.
Operating temperature .......................................................... -40 to 70 °C
Storage temperature.............................................................. -55 to 85 °C
Relative humidity................................................................... 10 to 90%, noncondensing
Maximum altitude.................................................................. 2,000 m; at higher altitudes the isolation voltage ratings must be lowered
Pollution degree.....................................................................
2
Shock and Vibration
Operating vibration
Random (IEC 60068-2-64).................................................. 10 to 500 Hz, 5 grms
Sinusoidal (IEC 60068-2-6) ................................................ 10 to 500 Hz, 5 g
Operating shock
(IEC 60068-2-27) ................................................................ 50 g, 3 ms half sine, 18 shocks at 6 orientations;
30 g, 11 ms half sine, 18 shocks at 6 orientations
Safety
This product is designed to meet the requirements of the following standards of safety for
electrical equipment for measurement, control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note: For UL and other safety certifications, refer to the product label or visit ni.com/certification, search by model number or
product line, and click the appropriate link in the Certification column.
Electromagnetic Compatibility
This product is designed to meet the requirements of the following standards of EMC for
electrical equipment for measurement, control, and laboratory use:
• EN 61326 EMC requirements; Industrial Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note: For EMC compliance, operate this device according to product documentation.
CE Compliance
This product meets the essential requirements of applicable European Directives,
as amended for CE marking, as follows:Low-Voltage Directive (safety)
• 73/23/EEC; Low-Voltage Directive (safety)
• 89/336/EEC; Electromagnetic Compatibility Directive (EMC)
Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information.
To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and
click the appropriate link in the Certification column.
Waste Electrical and Electronic Equipment (WEEE)
EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information
about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
5
NI [ National Instruments ]
