Series JL
Toggles
Illuminated Ultra-Thin Tactiles
Rockers
General
Specifications
Electrical Capacity (Resistive Load)
Low/Logic Level:
50mA @ 24V DC
Pushbuttons
Other Ratings
Programmable Illuminated PB
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Total Travel:
50 milliohms maximum
500 megohms minimum @ 250V DC
250V AC minimum for 1 minute minimum
1,000,000 operations minimum
1,000,000 operations minimum
3.0N
.030” (0.75mm)
Materials & Finishes
Rotaries
Actuator:
Case:
Base:
Movable Contact:
Stationary Contacts:
Switch Terminals:
Lamp Terminals:
Polycarbonate
Glass fiber reinforced polyamide
Glass fiber reinforced polybutylene terephthalate (PBT)
Phosphor bronze with silver plating
Brass with silver plating
Brass with silver plating
Brass with tin plating
Keylocks
Slides
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
Tactiles
J
PCB Processing
–25°C through +50°C (–13°F through +122°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Tilt
Soldering:
Cleaning:
Wave Soldering: See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
These devices are not process sealed. Hand clean locally using alcohol based solution.
Touch
Standards & Certifications
Supplement
Accessories
Indicators
The JL Series tactiles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current circuit.
When used as intended, the results do not produce hazardous energy.
J46
www.nkk.com