E2E-C@C@/B@, E2E-X1C@/B@ DC 3-wire Models
Size
Type
Item
Sensing distance
Set distance
Differential travel
Sensing object
Standard sensing object
Response speed (See note.)
Power supply voltage
(operating voltage range)
Current consumption
Control output
Load current
E2E-CR6C@/B@
0.6 mm
±
15%
0 to 0.4 mm
0.8 mm
±
15%
0 to 0.5 mm
3 dia.
4 dia.
Shielded
E2E-CR8C@/B@
E2E-X1C@/B@
1 mm
±
15%
0 to 0.7 mm
E2E-C1C@/B@
M5
5.4 dia.
15% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to
Engineering Data.)
Iron: 3 x 3 x 1 mm
2 kHz
Iron: 5 x 5 x 1 mm
3 kHz
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
10 mA max.
17 mA max.
Open-collector output
Open-collector output 100 mA max. (at 30 VDC max.)
80 mA max. (at 30 VDC
max.)
1 V max. (Load current: 2 V max. (Load current: 100 mA, Cable length: 2 m)
80 mA, Cable length:
2 m)
Operation indicator (red LED)
C1/-B1 Models:NO
C2/-B2 Models:NC
For details, refer to
Timing Charts.
Power supply reverse polarity protection, surge suppressor
Operating/Storage: –25
°
C to 70
°
C (with no icing or condensation)
Operating/Storage: 35% to 95%
Residual
voltage
Indicator
Operation mode (with sensing object
approaching)
Protection circuits
Ambient temperature
Ambient humidity
Temperature influence
Voltage influence
±
15% max. of sensing distance at 23
°
C in the temperature range of –25
°
C to 70
°
C
±
5% max. of sensing
distance in the rated
voltage range
±
10%
±
2.5% max. of sensing distance in the rated voltage range
±
15%
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Connection method
Weight
(packed state)
Pre-wired
models
Connector
models
Material
Case
Clamping nuts
Accessories
50 M
Ω
min. (at 500 VDC) between current-carrying parts and case
500 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
500 m/s
2
10 times each in X, Y, and Z directions
IEC 60529 IP66
Pre-wired models
(Standard length 2 m)
Approx. 60 g
---
Stainless steel (SUS303)
---
Instruction manual
Approx. 12 g
Approx. 15 g
Brass-nickel plated
Brass-nickel plated
Iron-zinc plated
---
IEC 60529 IP67 (Pre-wired models:
in-house standard for oil resistance (former
JEM standard equivalent to IP67g)) (See note 2.)
Pre-wired models (Standard length 2 m), connector models
Sensing surface
Heat-resistant ABS
Toothed washer
---
Note 1.
The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2.
This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
10
E2E/E2E2
Cylindrical Proximity Sensor
OMRON [ OMRON ELECTRONICS LLC ]
