E2E-X@E@/F@ DC 3-wire Models
Size
Type
Item
Sensing distance
Set distance
Differential travel
Sensing object
Standard sensing
object
Response speed (See
note 1.)
Power supply voltage
(operating voltage
range) (See note 2.)
Current consumption
Control
output
Shielded
M8
Unshielded
Shielded
E2E-X2E@/
F@
2 mm
±
10%
0 to 1.6 mm
E2E-X1R5E@/ E2E-X2ME@/
F@
F@
1.5 mm
±
10% 2 mm
±
10%
0 to 1.2 mm
0 to 1.6 mm
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to
Engineering Data.)
Iron, 8 x 8 x
1 mm
2.0 kHz
Iron, 12 x 12 x Iron, 12 x 12 x Iron, 15 x 15 x Iron, 18 x 18 x Iron, 30 x 30 x Iron, 30 x 30 x Iron, 54 x 54 x
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
1 mm
0.8 kHz
1.5 kHz
0.4 kHz
0.6 kHz
0.2 kHz
0.4 kHz
0.1 kHz
M12
Unshielded
E2E-X5ME@/
F@
5 mm
±
10%
0 to 4.0 mm
Shielded
E2E-X5E@/
F@
5 mm
±
10%
0 to 4.0 mm
M18
Unshielded
E2E-X10ME@/
F@
M30
Shielded
E2E-X10E@/
F@
10 mm
±
10%
0 to 8.0 mm
Unshielded
E2E-X18ME@/
F@
10 mm
±
10%
0 to 8.0 mm
18 mm
±
10%
0 to 14.0 mm
12 to 24 VDC (10 to 40 VDC), ripple (p-p): 10% max.
13 mA max.
Load current
200 mA max.
(See note 2.)
Residual
voltage
2 V max. (Load current: 200 mA, Cable length: 2 m)
Operation indicator (red LED)
E1 F1 Models: NO
E2 F2 Models: NC
For details, refer to
Timing Charts.
Power supply reverse polarity protection, surge suppressor, output load short-circuit protection
Operating/Storage: –40
°
C to 85
°
C (with no icing or condensation)
Operating/Storage: 35% to 95% (with no icing)
Indicator
Operation mode
(with sensing object
approaching)
Protection circuits
Ambient temperature
(See note 2)
Ambient humidity
Temperature influence
Voltage influence
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Connection method
Weight
(packed
state)
Material
Pre-wired
models
Connector
models
Case
Sensing
surface
Clamping
nuts
Toothed
washer
Accessories
±
15% max. of sensing distance at 23
°
C in the temperature range of –40
°
C to 85
°
C
±
10% max. of sensing distance at 23
°
C in the temperature range of –25
°
C to 70
°
C
±
1% max. of sensing distance in the rated voltage range
±
15%
50 M
Ω
min. (at 500 VDC) between current-carrying parts and case
1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
500 m/s
2
10 times each in X, Y, 1,000 m/s
2
10 times each in X, Y, and Z directions
and Z directions
IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See note
3.)
Pre-wired models (standard length 2 m), connector models
Approx. 65 g
Approx. 15 g
Stainless steel (SUS303)
Approx. 75 g
Approx. 25 g
Brass-nickel plated
Approx. 150 g
Approx. 40 g
Approx. 195 g
Approx. 90 g
PBT (
polybutylene terephthalate
)
Brass-nickel plated
Iron-zinc plated
Instruction manual
Note 1.
The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2.
When using an E2E with an M8 connector at an ambient temperature range between 70
°
C and 85
°
C, supply 10 to 30 VDC to the E2E and
make sure that the E2E has a control output of 100 mA maximum.
3.
This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
E2E/E2E2
Cylindrical Proximity Sensor
9
OMRON [ OMRON ELECTRONICS LLC ]
