Flat Cable Connectors for PCBs
XG2
Ideal for high-density mounting.
IDC design allows for quick termination.
• Part of a total flat cable wiring solution, when used in
conjunction with XG4, XG5 and XG8 sockets and plugs.
• End terminates cable to a PCB or acts as a pass through
for connection to other cables or PCB’s.
• Uses a standard 2.54-mm grid terminal arrangement for
easier design of circuits.
• Terminal Arrangement: standard or reverse.
• Uses UL94V-0 approved insulation material.
• IDC Assembly Tools are available.
XG2 Connectors
■
Terminal Arrangement
The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the
wires and the terminals would be as shown below.
Standard Terminal
Arrangement
Cable No.
Reverse Terminal
Arrangement
Cable No.
Cable No.
Cable number arrangement (top view)
Cable No.
■
Ratings and Characteristics
Rated current
Rated voltage
Contact resistance
Dielectric strength
Operating
temperature
1A
250 VAC
15 mΩ max. (at 20 mV, 100 mA max.)
500 VAC for 1 min. (leakage current: 1 mA
max.)
−55°C
to 85°C (with no icing at low
temperature)
■
Materials and Finish
Base
Fiber-glass reinforced PBT resin
(UL94V-0)/black
Terminals
Cover
Copper alloy/nickel base, tin plating
Fiber-glass reinforced PBT resin
(UL94V-0)/black
Contacts Mating end
Copper alloy/nickel base, tin plating
Insulation resistance
1,000 MΩ min. (at 500 VDC)
■
Applicable Wires
1.27-mm pitch, AWG28, 7-strand flat cable.
•
UL2651 (standard cable)
•
UL20012 (folding cable)
•
UL20028 (color-coded cable)
Flat Cable Connectors for PCBs
XG2
61
OMRON [ OMRON ELECTRONICS LLC ]
