ZEN-STARTER02-V2 参数 Datasheet PDF下载

Units with DC Power Supply

Note: 1.

Be sure to connect the COM terminal before turning ON the power supply. If the COM terminal is disconnected, or if the wiring is changed

after turning ON the power supply, a malfunction may occur.

2.

Apply the power supply voltage through a relay or switch in such a way that the voltage reaches the rated value within 4 s. If the voltage

is applied gradually, the power may not be reset or unstable output operations may result.

CPU Units with 10 I/O Points

For Connections to Negative (−) Common (PNP Connection)

12 to 24 VDC

Input device

COM

CPU Unit with 10 I/O points

For Connecting Analog Input Devices to Input Terminals I4 and I5

12 to 24 VDC

COM

I 0

I1

I2

I3

I4

I5

CPU Unit with 10 I/O points

Note:

When connecting an analog input device, always connect the negative side to the COM terminal.

For Connections to Positive (+) Common (NPN Connection)

12 to 24 VDC

Input

device

+

−

COM

I0

I1

I2

I3

I4

I5

CPU Unit with 10 I/O points

Note:

When connected to the positive (+) common, I4 and I5 cannot be used as analog inputs.

Programmable Relay

ZEN V2 Units

13