MC10H115
Quad Line Receiver
Description
The MC10H115 is a quad differential amplifier designed for use in
sensing differential signals over long lines. This 10H part is a
functional/ pinout duplication of the standard MECL 10K™ family
part, with 100% improvement in counting frequency and no increase
in power supply current.
The base bias supply (V
BB
) is made available at Pin 9 to make the
device useful as a Schmitt trigger, or in other applications where a
stable reference voltage is necessary. Active current sources provide
the MC10H115 with excellent common mode rejection. If any
amplifier in a package is not used, one input of that amplifier must be
connected to V
BB
(Pin 9) to prevent upsetting the current source bias
network.
The MC10H115 is designed to be used in sensing differential
signals over long lines. The bias supply (V
BB
) is made available to
make the device useful as a Schmitt trigger, or in other applications
where a stable reference voltage is necessary.
Active current sources provide these receivers with excellent
common−mode noise rejection. If any amplifier in a package is not
used, one input of that amplifier must be connected to V
BB
to prevent
unbalancing the current source bias network.
The MC10H115 does not have internal input pulldown resistors.
This provides high impedance to the amplifier input and facilitates
differential connections.
Features
http://onsemi.com
MARKING DIAGRAMS*
16
MC10H115L
AWLYYWW
CDIP−16
L SUFFIX
CASE 620A
1
16
16
1
PDIP−16
P SUFFIX
CASE 648
1
MC10H115P
AWLYYWWG
•
Propagation Delay, 1.0 ns Typical
•
Power Dissipation 110 mW Typ/Pkg (No Load)
•
Improved Noise Margin 150 mV (Over Operating Voltage and
Temperature Range)
•
Voltage Compensated
•
MECL 10K Compatible
Applications
10H115
ALYWG
SOEIAJ−16
CASE 966
1 20
•
•
•
•
Low Level Receiver
Voltage Level Interface
Schmitt Trigger
Pb−Free Packages are Available*
20 1
PLLC−20
FN SUFFIX
CASE 775
A
WL, L
YY, Y
WW, W
G
10H115G
AWLYYWW
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
©
Semiconductor Components Industries, LLC, 2006
February, 2006
−
Rev. 7
1
Publication Order Number:
MC10H115/D
ONSEMI [ ON SEMICONDUCTOR ]
