NBSG72A
2.5V/3.3V SiGe Differential
2 X 2 Crosspoint Switch
with Output Level Select
The NBSG72A is a high−bandwidth fully differential 2 X 2
crosspoint switch with Output Level Select (OLS) capabilities. This is
a part of the GigaComm™ family of high performance Silicon
Germanium products. The device is housed in a low profile 3 X 3 mm
16−pin QFN package.
Differential inputs incorporate internal 50
W
termination resistors
and accept NECL (Negative ECL), PECL (Positive ECL),
LVCMOS/LVTTL, CML, or LVDS. The OLS input is used to
program the peak−to−peak output amplitude between 0 mV and
800 mV in five discrete steps. The SELECT inputs are single−ended
and can be driven with either LVECL or LVCMOS/LVTTL
input levels.
http://onsemi.com
MARKING
DIAGRAM*
1
1
QFN−16
MN SUFFIX
CASE 485G
•
•
•
•
•
Maximum Input Clock Frequency > 7 GHz Typical
Maximum Input Data Rate > 7 Gb/s Typical
200 ps Typical Propagation Delay (OLS = FLOAT)
55/45 ps Typical Rise/Fall Times (OLS = FLOAT)
A
L
Y
W
= Assembly Location
= Wafer Lot
= Year
= Work Week
Selectable Swing PECL Output with Operating Range:
V
CC
= 2.375 V to 3.465 V with V
EE
= 0 V
•
Selectable Swing NECL Output with NECL Inputs with
Operating Range: V
CC
= 0 V with V
EE
= −2.375 V to −3.465 V
•
Selectable Output Levels (0 mV, 200 mV, 400 mV, 600 mV or
800 mV Peak−to−Peak Output)
•
50
W
Internal Input Termination Resistors
*For additional marking information, refer to
Application Note AND8002/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
•
Single−Ended LVECL or LVCMOS/LVTTL Select Inputs
(SELA, SELB)
•
Pb−Free Package is Available
©
Semiconductor Components Industries, LLC, 2004
1
October, 2004 − Rev. 2
Publication Order Number:
NBSG72A/D
ÇÇ
ÇÇ
16
SG
72A
ALYW