CT-100A OPERATION INSTRUCTIONS
CRIMP POCKET
CRIMP POCKET
CRIMP POCKET
NON-INSULATED
TERMINAL AND DISCONNECT
INSTRUCTIONS
1. Insert stripped wire into terminal or
disconnect until a minimum of 1/32" of
conductor extends beyond barrel. (See
product packaging for proper strip lengths.)
2. Locate terminal or disconnect in proper non-
insulated crimp pocket.
3. Position crimp pocket on the center of the
metal barrel.
4. Squeeze handles firmly.
NON-INSULATED BUTT SPLICE
INSTRUCTIONS
1. Insert stripped wire into end of the butt
splice to internal wire stop. (See product
packaging for proper strip lengths.)
2. Locate butt splice in proper non-insulated
crimp pocket.
3. Position crimp pocket on the center of the
metal barrel half with wire inserted.
4. Squeeze handles firmly.
5. Repeat for other end of butt splice.
NON-INSULATED WIRE JOINT
INSTRUCTIONS
1. Twist ends of stripped wire together, trim
and insert into wire joint. (See product
packaging for proper strip lengths and
trimming instructions.)
2. Locate wire joint in proper non-insulated
crimp pocket.
3. Position crimp pocket on the center of the
metal barrel.
4. Squeeze handles firmly.
CRIMP POCKET
CRIMP POCKET
CRIMP POCKET
INSULATED
TERMINAL AND DISCONNECT INSTRUC-
TIONS
1. Insert stripped wire into terminal or
disconnect until a minimum of 1/32" of
conductor extends beyond barrel. (See
product packaging for proper strip lengths.)
2. Locate terminal or disconnect in proper
insulated crimp pocket.
3. Position crimp pocket on the center of the
metal barrel.
4. Squeeze handles firmly.
5. Close insulation if desired.
INSULATED BUTT SPLICE
INSTRUCTIONS
1. Insert stripped wire into end of the butt
splice to internal wire stop. (See product
packaging for proper strip lengths.)
2. Locate butt splice in proper insulated crimp
pocket.
3. Position crimp pocket on the center of the
metal barrel half with wire inserted.
4. Squeeze handles firmly.
5. Close insulation if desired.
6. Repeat for other end of butt splice.
INSULATED WIRE JOINT
INSTRUCTIONS
1. Twist ends of stripped wire together, trim and
insert into wire joint. (See product packaging
for proper strip lengths and trimming
instructions.)
2. Locate wire joint in proper insulated crimp
pocket.
3. Position crimp pocket on the center of the
metal barrel.
4. Squeeze handles firmly.
5. Close insulation if desired.
Page: 2 of 2
PANDUIT [ PANDUIT CORP. ]
