Pomona
®
Model 1326
Double Banana Plug One End Only
Part Number
1326-A-60
1326-C-60
Schematic
2
1
Cable Type
Twisted Pair
RG58C/U
Diameter
Impedance
.250” (6,35 mm)
-
.195” (4,95 mm) 50 Ohms
Length
60” (152,4 cm)
60” (152,4 cm)
FEATURES:
•
This double banana plug cable is designed to be
used with all standard .166” (4mm) diameter
banana jacks.
•
These jacks are usually spaced at .75” (19mm)
apart. Pomona’s double banana plugs can be
used with most digital multimeters that have the
common and volt-ohm jacks at the standard
spacing.
•
This cable is also suited for use with power
supplies that have binding post outputs
•
The Pomona Banana Plug is well known for
durability and reliability.
•
We take considerable pride in the materials and
workmanship that go into this plug.
The one-piece Beryllium Copper leaf spring
with hard nickel plating is swaged into the
solid brass banana plug body.
MATERIALS:
The plug is insert molded with black polypropylene
(1326-C-).
The plug is insert molded with gray polypropylene (1326-
A-).
RATINGS:
Operating Temperature: +55° C (+131° F) Max.
1326-A 300VAC/424VDC
1326-C 500VRMS
ORDERING INFORMATION:
Model 1326
•
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
SY/EH/LS
Sales: 800-490-2361 Fax: 888-403-3360
Technical Assistance: 800-241-2060
PomonaACCESS
90503
(800) 444-6785 or (425) 446-6010
More drawings available at www.pomonaelectronics.com
Page 1 of 1
S:\Engineering \Release\DataSheets\FlukeDataSheet\d1326_1_01.doc