Pomona
®
Model 4276-C-#
BNC Male Right Angle Both Ends
FEATURES:
•
This cable assembly is similar to our model 2249-C except with right angle connectors.
•
It is designed to access those BNC connectors in tight locations such as found in the back of rack mounted
equipment.
•
The right angle connectors are impedance matched to provide the best signal quality.
•
These cables are made of the highest quality materials and assembly procedures.
MATERIALS:
BNC: Body: Brass, tarnish resistant plating
Center Contacts: Brass, gold plating
Strain Relief: PVC, molded onto cable and connector
Cable: RG58C/U, 50 Ohm, .195 OD
RATINGS:
Voltage:Shield/Earth: 30VAC/60VDC Max.
Inner Conductor/Shield: 500VRMSMax.
Operating Temperature: +50° C (+122° F)
Nominal Impedance: 50 Ohms
ORDERING INFORMATION:
Model 4276-C-XX
XX = Cable length in inches
Std. Lengths: 12” (30,5 cm), 24” (61 cm), 36” (91.44 cm), 48” (121.92 cm), 60” (152.4 cm)
Additional lengths can be quoted upon request.
Ordering Example: 4276-C-60 is a cable with a length of 60” (152,4 cm)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
SY/EH/LS
Sales: 800-490-2361 Fax: 888-403-3360
Technical Assistance: 800-241-2060
PomonaACCESS
90338
(800) 444-6785 or (425) 446-6010
More drawings available at www.pomonaelectronics.com
Page 1 of 1
S:\Engineering \Release\DataSheets\FlukeDataSheet\d4276_1_01.doc