OS10040320PW
Absolute Maximum Ratings
Caution! ESD sensitive device.
Parameter
Rating
Unit
Frequency Range
40 to 1000
5
MHz
mW
Optical Input Power (continuous)
RoHS (Restriction of Hazardous
Substances): Compliant per EU Directive
2011/65/EU.
ESD Sensitivity according to MIL Standard 1686C
500
V
(Human Body Model; R = 1.5kΩ, C = 100pF)
Storage Temperature
-40 to +85
°C
°C
mm
N
Operating Mounting Base Temperature
Minimum Fiber Bending Radius
Maximum Tensile Strength
-20 to +85
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
35
5
Nominal Operating Parameters
Specification
Parameter
Unit
Condition
Min
Typ
3150
<0.7
Max
General Performance
Responsivity
V+ = 24V; TMB = 30°C; ZL = 75Ω
3000
0
V/W
dB
f = 1000MHz, λ = 1310nm
Slope[1]
2.0
1.0
f = 40MHz to 1000MHz
Flatness of O/E Response
Optical Input Return Loss
Output Return Loss
dB
f = 40MHz to 1000MHz (measured peak to valley)
45.0
15.0
dB
17.0
4.5
dB
f = 40MHz to 1000MHz
5.0
5.5
pA/ √Hz f = 40MHz to 400MHz
pA/ √Hz f = 400MHz to 1000MHz
Equivalent Input Noise
Spectral Sensitivity
5.0
0.88
0.90
1290
A/W
A/W
nm
λ = (1310 ± 20)nm
λ = (1550 ± 20)nm
Optical Wavelength
1600
260
Total Current Consumption (DC)
Photodiode Bias Current
255
6.0
mA
mA
module pin 4 and 5 connected to V+
10.0
Distortion Data
V+ = 24V; TMB = 30°C; ZL = 75Ω
Second Order Distortion[2]
-75
-72
-70
-65
-64
-75
-75
-72
-72
-72
-70
-67
-65
-61
-60
-70
-70
-68
-67
-67
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
dBc
fm = 54MHz; f1 = 187.25MHz; f2 = 133.25MHz
fm = 446.5MHz; f1 = 97.25MHz; f2 = 349.25MHz
fm = 548.5MHz; f1 = 109.25MHz; f2 = 439.25MHz
fm = 746.5MHz; f1 = 133.25MHz; f2 = 613.25MHz
fm = 854.5MHz; f1 = 133.25MHz, f2 = 721.25MHz
Third Order Distortion[3]
fm = 55.25MHz; f1 = 109.25MHz; f2 = 133.25MHz; f3 = 187.25MHz
fm = 445.25MHz; f1 = 193.25MHz; f2 = 349.25MHz; f3 = 97.25MHz.
fm = 547.25MHz; f1 = 217.25MHz; f2 = 439.25MHz; f3 = 109.25MHz
fm = 745.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 613.25MHz
fm = 853.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 721.25MHz
1. Slope is defined as the difference between the O/E response at the start frequency and the O/E response at the stop frequency.
2. Two laser test; each laser with 40% OMI; Popt = 1mW (total).
3. Three laser test; each laser with 60% OMI; Popt = 1mW (total).
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140319
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 4
RFMD [ RF MICRO DEVICES ]
