R5-S Ultra-Miniature SMD Reed Sensor
Actuation Distances
Operate and release distances for the R5-S ultra-miniature reed sensor in two standard AT bands, when actuated (as shown in the
sketches) with NdFeB standard magnets is shown below. All distances given are in mm with tolerances of ±0.5mm. Although some
of the AT band / magnet combinations will produce similar actuating distances, selecting the right AT band and magnet for an
application is important and can be done by going through our AT band FAQ and our magnet selection guide.
R5S-1 (7-12 AT)
Actuation Sketch
Magnet
NDR-T
NDC-T
NDR-S
NDC-S
NDR-M
NDC-M
NDR-L
NDC-L
Dimensions
4.0 x 1.5 x 1.5
Ø2.0 x 4.0
6.0 x 2.5 x 2.5
Ø3.0 x 7.0
8.0 x 3.0 x 3.0
Ø4.0 x 10.0
19.0 x 4.0 x 4.0
Ø8.0 x 15.0
Operate Distance
2.0 – 4.5
2.5 – 5.0
5.0 – 8.5
6.0 – 10.0
7.0 – 11.0
9.5 – 13.0
11.5 – 19.0
19.0 – 27.0
Release Distance
2.0 – 5.0
2.5 – 5.5
5.0 – 9.0
6.0 – 10.5
7.0 – 11.5
9.5 – 13.5
11.5 – 19.5
19.0 – 27.5
R5S-2 (12-17 AT)
Actuation Sketch
Magnet
NDR-T
NDC-T
NDR-S
NDC-S
NDR-M
NDC-M
NDR-L
NDC-L
Dimensions
4.0 x 1.5 x 1.5
Ø2.0 x 4.0
6.0 x 2.5 x 2.5
Ø3.0 x 7.0
8.0 x 3.0 x 3.0
Ø4.0 x 10.0
19.0 x 4.0 x 4.0
Ø8.0 x 15.0
Operate Distance
2.0 – 3.0
2.5 – 3.5
5.0 – 6.5
5.5 – 7.5
7.0 – 9.0
9.0 – 11.0
11.0 – 15.0
17.5 – 22.0
Release Distance
2.0 – 3.5
2.5 – 4.0
5.0 – 7.0
5.5 – 8.0
7.0 – 9.5
9.0 – 11.5
11.0 – 15.5
17.5 – 22.5
Due to continual improvement, specifications are subject to change without notice
www.reed-sensor.com
31 July 2008
Reed Relays and Electronics India Limited
info@reed-switch.com
Tel 91-44-6528-4022
RRE [ Reed Relays and Electronics ]
