Series 11
PC mount switching solenoid valve
PERFORMANCE CHARACTERISTICS
Part no.
1110...
1113...
1116...
1112...
1115...
1118...
Pressure
0...100 psig
0...50 psig
0...25 psig
0...70 psig
0...25 psig
0...10 psig
Vacuum
Orifice siz es/
Equivalent C
V1
Leak rate
2
R esp o n se
<30 msec cycling
(2 Watt)
0.030" (0.762 mm)/
0.017 C
V
0...27 "Hg
(0...13 psi)
0.050" (1.270 mm)/
0.035 C
V
≤
0.016 sccm
(bubble tight)
<30 msec cycling
(2 Watt)
FLOW CURVE (typical air flow)
3
Notes:
1
The C
V
value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a
valve. If several valves with the same nominal diameter are compared, the valve with the highest C
V
value has the best flow
dynamics design. The equivalent european measure is the k
V
value expressed in m
3
/h (k
V
= 0.86 C
V
).
2
sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and
pressure. 1000 sccm = 1 slpm.
3
slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure.
1 slpm = 1000 sccm.
June 2007 / 259
2/5
www.sensortechnics.com
SENSORTECHNICS [ SENSORTECHNICS GMBH ]
