欢迎访问ic37.com |
会员登录 免费注册
发布采购

CY28341ZC-2 参数 Datasheet PDF下载

CY28341ZC-2图片预览
型号: CY28341ZC-2
PDF下载: 下载PDF文件 查看货源
内容描述: 通用时钟芯片为VIA ™ P4M / KT / KM400 DDR系统 [Universal Clock Chip for VIA⑩P4M/KT/KM400 DDR Systems]
分类和应用: 晶体外围集成电路光电二极管双倍数据速率时钟
文件页数/大小: 18 页 / 228 K
品牌: SPECTRALINEAR [ SPECTRALINEAR INC ]
 浏览型号CY28341ZC-2的Datasheet PDF文件第1页浏览型号CY28341ZC-2的Datasheet PDF文件第3页浏览型号CY28341ZC-2的Datasheet PDF文件第4页浏览型号CY28341ZC-2的Datasheet PDF文件第5页浏览型号CY28341ZC-2的Datasheet PDF文件第6页浏览型号CY28341ZC-2的Datasheet PDF文件第7页浏览型号CY28341ZC-2的Datasheet PDF文件第8页浏览型号CY28341ZC-2的Datasheet PDF文件第9页  
CY28341-2
Pin Description
[2]
Pin Number
3
4
1
XIN
XOUT
FS0/REF0
VDD
VDDR
Pin Name
PWR
I/O
I
O
Pin Description
Oscillator Buffer Input.
Connect to a crystal or to an external clock.
Oscillator Buffer Output.
Connect to a crystal. Do not connect when an
external clock is applied at XIN.
I/O
Power-on Bidirectional Input/Output.
At power-up, FS0 is the input. When
PU the power supply voltage crosses the input threshold voltage, FS0 state is
latched and this pin becomes REF0, buffered copy of signal applied at XIN.
(1-2 x strength, selectable by SMBus. Default value is 1 x strength.)
I
If SELP4_K7 = 1, with a P4 processor set up as CPUT/C.
At power-up,
VTT_PWRGD# is an input. When this input transitions to a logic low, the FS
(3:0) and MULTSEL are latched and all output clocks are enabled. After the
first high to low transition on VTT_PWRGD#, this pin is ignored and will not
effect the behavior of the device thereafter. When the VTT_PWRGD# feature
is not used, please connect this signal to ground through a 10K resistor.
If SELP4_K7 = 0, with an Athlon (K7) processor as CPU_OD(T:C).
VTT_PWRGD# function is disabled, and the feature is ignored. This pin
becomes REF1 and is a buffered copy of the signal applied at XIN.
These pins are programmable through strapping pin11, SELSDR_DDR#.
If SELSDR_DDR#.= 0, these pins are configured for DDR clock outputs. They
are “True” copies of signal applied at Pin45, BUF_IN. In this mode, VDDD must
be 2.5VIf SelSDR_DDR#.= 1, these pins are configured for
SDRAM(0,2,4,6,8,10) single ended clock outputs, copies of (and in phase
with) signal applied at Pin45, BUF_IN. In this mode, VDDD must be 3.3V
These pins are programmable through strapping pin11, SELSDR_DDR#.
If SelSDR_DDR#.= 0, these pins are configured for DDR clock outputs. They
are “Complementary” copies of signal applied at Pin45, BUF_IN. In this mode,
VDDD must be 2.5VIf SelSDR_DDR#.= 1, these pins are configured for
SDRAM(1,3,5,7,9,11) single ended clock outputs, copies of (and in phase with)
signal applied at Pin45, BUF_IN. In this mode, VDDD must be 3.3V.
56
VTTPWRGD#
VDDR
REF1
VDDR
O
44,42,38,
36,32,30
DDRT
(0:5)/SDRAM
(0,2,4,6,8,10)
VDDD
O
43,41,37
35,31,29
DDRC
(0:5)/SDRAM
(1,3,5,7,9,11)
VDDD
O
7
SELP4_K7 /
AGP1
VDDAGP I/O
Power-on Bidirectional Input/Output.
At power-up, SELP4_K7 is the input.
PU When the power supply voltage crosses the input threshold voltage,
SELP4_K7 state is latched and this pin becomes AGP1 clock output.
SELP4_K7 = 1, P4 mode. SELP4_K7 = 0, K7 mode.
VDDPCI
I/O
Power-on Bidirectional Input/Output.
At power-up, MULTSEL is the input.
PU When the power supply voltage crosses the input threshold voltage, MULTSEL
state is latched and this pin becomes PCI2 clock output. MULTSEL = 0, Ioh is
4 x IREFMULTSEL = 1, Ioh is 6 x IREF
O
3.3V CPU Clock Outputs.
This pin is programmable through strapping pin7,
SELP4_K7. If SELP4_K7 = 1, this pin is configured as the CPUT Clock Output.
If SELP4_K7 = 0, this pin is configured as the CPUOD_T Open Drain Clock
Output. See
Table 1
3.3V CPU Clock Outputs.
This pin is programmable through strapping pin7,
SELP4_K7. If SELP4_K7 = 1, this pin is configured as the CPUC Clock Output.
If SELP4_K7 = 0, this pin is configured as the CPUOD_C Open Drain Clock
Output. See
Table 1
2.5V CPU Clock Outputs for Chipset.
See
Table 1.
PCI Clock Outputs.
Are synchronous to CPU clocks. See
Table 1
12
MULTSEL/PCI2
53
CPUT/CPUOD_T
VDDC
52
CPUC/CPUOD_C
VDDC
O
48,49
10
CPUCS_T/C
FS1/PCI_F
VDDI
VDDPCI
VDDPCI
O
O
14,15,17,18 PCI (3:6)
I/O
Power-on Bidirectional Input/Output.
At power-up, FS0 is the input. When
PD the power supply voltage crosses the input threshold voltage, FS1 state is
latched and this pin becomes PCI_F clock output.
20
FS3/48M
VDD48M I/O
Power-on Bidirectional Input/Output.
At power-up, FS3 is the input. When
PD the power supply voltage crosses the input threshold voltage, FS3 state is
latched and this pin becomes 48M, a USB clock output.
(range 200 k
to 500 k ).
Note:
2. PU = internal pull-up. PD = internal pull-down. Typically = 250 k
Rev 1.0, November 21, 2006
Page 2 of 18