EMIF06-SD03F3
6-line IPAD™, EMI filter and ESD protection for SD card
Features
■
■
■
■
■
ESD protection (IEC standard)
EMI Filtering
Level translator
Signal conditionning
Integrated power supply with:
– Thermal shutdown (TSD)
– Under voltage lockout (UVLO)
– Short-circuit current limitation (I
SC
)
– Power on/off feature with Enable pin
Figure 1.
Flip Chip
(24 bumps)
Benefits
■
■
■
■
■
■
■
■
Pin configuration (bump side)
5
4
3
2
1
A
B
C
D
E
EMI Low-pass-filter and ESD protection (up to
15 kV on external pins)
Integrated pull up resistors prevent bus floating
50 MHz clock frequency compatible with
C
line
< 40 pF
Lead-free package in 400 µm pitch
Low power consumption
Very low PCB space consumption
High reliability offered by monolithic integration
Reduction of parasitic elements thanks to CSP
integration
Complies with the following standards:
■
Applications
■
IEC 61000-4-2, Level 4: External pins
– 15 kV (air discharge)
– 8 kV (contact discharge)
HBM IEC 61340-3-1: All pins
– 2 kV (air discharge)
– 2 kV (contact discharge)
Removable memory cards in mobile phones,
communication systems, and portable
applications
Memory cards compliant with: SD (standard
and high speed), MiniSD, µSD and
MMC/Trans-flash standards
■
■
Description
TM: IPAD is a trademark of STMicroelectronics.
The EMIF06-SD03F3 is a highly integrated
device, based on IPAD technology, combining the
5 functions described under
Features.
February 2010
Doc ID 15194 Rev 2
1/23
23