Ordering information
STM8S105xx
Contact
Phone no.
a
.............................................................................................
.............................................................................................
Reference FASTROM code .............................................................................................
Preferable format for programing code is .Hex (.s19 is accepted)
If data EEPROM programing is required, a seperate file must be sent with the requested data.
Important:
See the option byte section in the datasheet for authorized option byte
combinations and a detailed explanation.
Device type/memory size/package (check only one option)
FASTROM device
VFQFPN32
LQFP32
LQFP44
LQFP48
16 Kbyte
[ ] STM8S105K4
[ ] STM8S105K4
[ ] STM8S105S4
[ ] STM8S105C4
32 Kbyte
[ ] STM8S105K6
[ ] STM8S105K6
[ ] STM8S105S6
[ ] STM8S105C6
Conditioning (check only one option)
[ ] Tape & reel or [ ] Tray
Special marking (check only one option)
[ ] No [ ] Yes
Authorized characters are letters, digits, '.', '-', '/' and spaces only. Maximum character counts
are:
VFQFPN32: 1 line of 7 characters max: "_ _ _ _ _ _ _"
LQFP32: 2 lines of 7 characters max: "_ _ _ _ _ _ _" and "_ _ _ _ _ _ _"
LQFP44: 2 lines of 7 characters max: "_ _ _ _ _ _ _" and "_ _ _ _ _ _ _"
LQFP48: 2 lines of 8 characters max: "_ _ _ _ _ _ _" and "_ _ _ _ _ _ _"
Temperature range
[ ] -40°C to +85°C or [ ] -40°C to +125°C
Padding value for unused program memory (check only one option)
[ ]0xFF
[ ]0x83
[ ]0x75
Fixed value
TRAP instruction opcode
Illegal opcode (causes a reset when executed)
OPT0 memory readout protection (check only one option)
[ ] Disable or [ ] Enable
OPT1 user boot code area (UBC)
0x(_ _) fill in the hexadecimal value, refering to the datasheet and the binary format below.
a
FASTROM code name is assigned by STMicroelectronics.
118/127
DocID14771 Rev 9
STMICROELECTRONICS [ STMICROELECTRONICS ]
