VN410
SMART DIRECTION INDICATOR
2 CHANNEL DRIVERS
T YPE
VN410
V
DSS(c l)
60V
I
n
(9)
4.8 A
R
on
0.07
Ω
I
n
(9) : ISO definition nominal current for high side automotive
switches.
s
s
s
s
s
s
s
LOAD CURRENT UP TO 15A PER CHANNEL
OVER VOLTAGE PROTECTION
UNDER VOLTAGE PROTECTION
DOUBLE FLASHING FREQUENCY IN LOW
LOAD CONDITION
CYCLE BY CYCLE POWER LIMITATION
BUZZER DRIVER
TRAILER INDICATION
MULTIWATT-15
Order Codes :
(vertical)
(In Line)
VN410
VN410(012Y)
by flashing red LED connected to LEDEM output.
AL input can be connected to an anti-theft alarm
system, making both power outputs flashing. In
case of low load (burned lamp) buzzer frequency
and outputs flashing will double, thus indicating a
fault condition (direction mode only).
In case of overloading of the power outputs,
built-in-thermal shutdown circuits will reduce duty
cycle so as to keep maximum junction
temperature within safe limits. Rol pin is
connected to an external resistor to detect a
burned lamp and a trailer connection. LEDT is
connected to an external green LED which
indicates the trailer connection.
DESCRIPTION
The VN410 is a monolithic device made using
SGS-THOMSON Vertical Intelligent Power
Technology, integrating all the features needed to
implement a complete automotive flashing
system.
This device has two identical power channels, so
the informations are are specified for only one. R
t
,
C
t
pins are connected to an external R, C
network which fixes the flashing frequency. LDIR,
RDIR direction inputs activate the corresponding
output (or none). EM inputs turns on both power
outputs for emergency flashing, which is reflected
BLOCK DIAGRAM
March 1998
1/11