12.Resistance to vibration
LB, LBC, LBR, LBMF Series
Inductance change : Within±10％
No significant abnormality in appearance.
CB, CBC, CBL, CBMF Series
LBM Series
Specified Value
Inductance change : Within±5％
No significant abnormality in appearance.
LB・LBR・LBC・CB・CBC・CBL・LBM・LBMF・CBMF : According to JIS C5102 clause 8.2.
Vibration type
Directions
: A
: 2 hrs each in X, Y and Z directions. Total：6 hrs
: 10 to 55 to 10 Hz（1min.）
Test Methods and
Remarks
Frequency range
Amplitude
: 1.5mm
Mounting method
Recovery
: Soldering onto printed board
: At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48
hrs.
13.Drop test
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
Specified Value
－
14.Solderability
Specified Value
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
At least 90％ of surface of terminal electrode is covered by new
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：
Test Methods and
Remarks
Solder temperature
Duration
: 245±5℃
: 5±0.5sec
Flux
: Methanol solution with 25％ of colophony
15.Resistance to soldering
LB, LBC, LBR, LBMF Series
Inductance change : Within±10％
Inductance change : Within±5％
Specified Value
CB, CBC, CBL, CBMF Series
LBM Series
Test Methods and LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：
Remarks 3 times of reflow oven at 230℃ MIN for 40sec. with peak temperature at 260 ℃ for 5sec.
16.Resisitance to solvent
LB, LBC, LBR, LBMF Series
Specified Value
CB, CBC, CBL, CBMF Series
LBM Series
－
Solvent temperature
Type of solvent
: Room temperature
Test Methods and
Remarks
: Isopropyl alcohol
Cleaning conditions
: 90s. Immersion and cleaning.
17.Thermal shock
Specified Value
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
Inductance change : Within±10％
No significant abnormality in appearance.
Test Methods and LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：－40～＋85℃, maintain times 30min. ,100 cycle
Remarks Recovery : At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
i_wound_CB_LB_reli_e-E02R01
TAIYO YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
