MATRA MHS
80C32/80C52
* Notice
Absolute Maximum Ratings*
Stresses above those listed under “ Absolute Maximum Ratings” may
cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any other conditions above
those indicated in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
Ambient Temperature Under Bias :
A = Automotive . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . –65°C to + 150°C
Voltage on VCC to VSS . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to + 7 V
Voltage on Any Pin to VSS . . . . . . . . . . . . . . . –0.5 V to VCC + 0.5 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 W
* This value is based on the maximum allowable die temperature and
the thermal resistance of the package
DC Parameters
TA = –40°C + 125°C ; VSS = 0 V ; VCC = 5 V ± 10 % ; F = 0 to 36 MHz
SYMBOL
VIL
PARAMETER
MIN
– 0.5
MAX
0.2 Vcc – 0.1
Vcc + 0.5
Vcc + 0.5
UNIT
TEST CONDITIONS
Input Low Voltage
V
V
V
VIH
Input High Voltage (Except XTAL and RST)
Input High Voltage (for XTAL and RST)
Output Low Voltage (Port 1, 2 and 3)
0.2 Vcc + 1.4
0.7 Vcc
VIH1
VOL
0.3
0.45
1.0
V
V
V
IOL = 100 µA
IOL = 1.6 mA (note 2)
IOL = 3.5 mA
VOL1
VOH
Output Low Voltage (Port 0, ALE, PSEN)
Output High Voltage Port 1, 2 and 3
0.3
0.45
1.0
V
V
V
IOL = 200 µA
IOL = 3.2 mA (note 2)
IOL = 7.0 mA
Vcc – 0.3
Vcc – 0.7
Vcc – 1.5
V
V
V
IOH = – 10 µA
IOH = – 30 µA
IOH = – 60 µA
VCC = 5 V ± 10 %
VOH1
Output High Voltage (Port 0, ALE, PSEN)
Vcc – 0.3
Vcc – 0.7
Vcc – 1.5
V
V
V
IOH = – 200 µΑ
IOH = – 3.2 mA
IOH = – 7.0 mA
VCC = 5 V ± 10 %
IIL
ILI
Logical 0 Input Current (Ports 1, 2 and 3)
Input leakage Current
– 75
±10
– 750
75
µA
µA
Vin = 0.45 V
0.45 < Vin < Vcc
Vin = 2.0 V
ITL
Logical 1 to 0 Transition Current (Ports 1, 2 and 3)
Power Down Current
µA
IPD
RRST
CIO
ICC
µA
Vcc = 2.0 V to 5.5 V (note 1)
RST Pulldown Resistor
50
200
10
KOhm
pF
Capacitance of I/O Buffer
fc = 1 MHz, Ta = 25_C
Vcc = 5.5 V
Power Supply Current
Freq = 1 MHz Icc op
Icc idle
Freq = 6 MHz Icc op
Icc idle
1.8
1
10
4
mA
mA
mA
mA
Freq ≥ 12 MHz Icc op = 1.25 Freq (MHz) + 5 mA
Icc idle = 0.36 Freq (MHz) + 2.7 mA
Rev. E (31/08/95)
11
TEMIC [ TEMIC SEMICONDUCTORS ]
