LM2904 Q1
DUAL OPERATIONAL AMPLIFIER
SLOS414E − MAY 2003 − REVISED JUNE 2004
D
Qualification in Accordance With
D
D
D
D
D
D
AEC-Q100
†
Qualified for Automotive Applications
Customer-Specific Configuration Control
Can Be Supported Along With
Major-Change Approval
ESD Protection Exceeds 500 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.7 mA Typ
Common-Mode Input Voltage Range
Includes Ground, Allowing Direct Sensing
Near Ground
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage:
− Non-V Devices . . .
±26
V
− V-Suffix Devices . . .
±32
V
D
Low Input Bias and Offset Parameters:
− Input Offset Voltage . . . 3 mV Typ
− Input Offset Current . . . 2 nA Typ
− Input Bias Current . . . 20 nA Typ
Open-Loop Differential Voltage
Amplification . . . 100 V/mV Typ
Internal Frequency Compensation
D OR PW PACKAGE
(TOP VIEW)
D
D
1OUT
1IN−
1IN+
GND
1
2
3
4
8
7
6
5
V
CC
2OUT
2IN−
2IN+
† Contact factory for details. Q100 qualification data available on
request.
description/ordering information
This device consists of two independent, high-gain, frequency-compensated operational amplifiers designed
to operate from a single supply over a wide range of voltages. Operation from split supplies is possible as long
as the difference between the two supplies is 3 V to 26 V (3 V to 32 V for V-suffix devices), and V
CC
is at least
1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the
magnitude of the supply voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational
amplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example,
these devices can be operated directly from the standard 5-V supply used in digital systems and easily provide
the required interface electronics without additional
±5-V
supplies.
The LM2904Q is manufactured to demanding automotive requirements.
ORDERING INFORMATION
TA
VIOmax
AT 25°C
7 mV
7 mV
−40°C to 125°C
7 mV
7 mV
2 mV
2 mV
MAX VCC
26 V
26 V
32 V
32 V
32 V
32 V
SOIC (D)
TSSOP (PW)
SOIC (D)
TSSOP (PW)
SOIC (D)
TSSOP (PW)
PACKAGE
‡
Tape and reel
Tape and reel
Tape and reel
Tape and reel
Tape and reel
Tape and reel
ORDERABLE
PART NUMBER
LM2904QDRQ1
LM2904QPWRQ1
LM2904VQDRQ1
LM2904VQPWRQ1
LM2904AVQDRQ1
LM2904AVQPWRQ1
TOP-SIDE
MARKING
2904Q1
2904Q1
2904VQ1
2904VQ1
2904AVQ
2904AVQ
‡ Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright
2004, Texas Instruments Incorporated
POST OFFICE BOX 655303
•
DALLAS, TEXAS 75265
1