欢迎访问ic37.com |
会员登录 免费注册
发布采购

LM2940CSX-12 参数 Datasheet PDF下载

LM2940CSX-12图片预览
型号: LM2940CSX-12
PDF下载: 下载PDF文件 查看货源
内容描述: LM2940 -N / LM2940C 1A低压降稳压器 [LM2940-N/LM2940C 1A Low Dropout Regulator]
分类和应用: 稳压器调节器输出元件
文件页数/大小: 35 页 / 2445 K
品牌: TI [ TEXAS INSTRUMENTS ]
 浏览型号LM2940CSX-12的Datasheet PDF文件第2页浏览型号LM2940CSX-12的Datasheet PDF文件第3页浏览型号LM2940CSX-12的Datasheet PDF文件第4页浏览型号LM2940CSX-12的Datasheet PDF文件第5页浏览型号LM2940CSX-12的Datasheet PDF文件第6页浏览型号LM2940CSX-12的Datasheet PDF文件第7页浏览型号LM2940CSX-12的Datasheet PDF文件第8页浏览型号LM2940CSX-12的Datasheet PDF文件第9页  
SNVS769I – MARCH 2000 – REVISED APRIL 2013
LM2940-N/LM2940C 1A Low Dropout Regulator
Check for Samples:
1
FEATURES
Dropout Voltage Typically 0.5V @I
O
= 1A
Output Current in Excess of 1A
Output Voltage Trimmed Before Assembly
Reverse Battery Protection
Internal Short Circuit Current Limit
Mirror Image Insertion Protection
P
+
Product Enhancement Tested
DESCRIPTION
The LM2940-N/LM2940C positive voltage regulator
features the ability to source 1A of output current with
a dropout voltage of typically 0.5V and a maximum of
1V over the entire temperature range. Furthermore, a
quiescent current reduction circuit has been included
which reduces the ground current when the
differential between the input voltage and the output
voltage exceeds approximately 3V. The quiescent
current with 1A of output current and an input-output
differential of 5V is therefore only 30 mA. Higher
quiescent currents only exist when the regulator is in
the dropout mode (V
IN
V
OUT
3V).
Designed also for vehicular applications, the LM2940-
N/LM2940C and all regulated circuitry are protected
from reverse battery installations or 2-battery jumps.
During line transients, such as load dump when the
input voltage can momentarily exceed the specified
maximum operating voltage, the regulator will
automatically shut down to protect both the internal
circuits and the load. The LM2940/LM2940C cannot
be harmed by temporary mirror-image insertion.
Familiar regulator features such as short circuit and
thermal overload protection are also provided.
2
Typical Application
*Required if regulator is located far from power supply filter.
**C
OUT
must be at least 22
μF
to maintain stability. May be increased without bound to maintain regulation during
transients. Locate as close as possible to the regulator. This capacitor must be rated over the same operating
temperature range as the regulator and the ESR is critical; see curve.
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
Copyright © 2000–2013, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.