TMP411
SBOS383C − DECEMBER 2006 − REVISED MAY 2008
±1°C
Remote and Local TEMPERATURE SENSOR
with N-Factor and Series Resistance Correction
FEATURES
D
D
D
D
D
D
D
D
D
D
D
D
±1°C
REMOTE DIODE SENSOR
±1°C
LOCAL TEMPERATURE SENSOR
PROGRAMMABLE NON-IDEALITY FACTOR
SERIES RESISTANCE CANCELLATION
ALERT FUNCTION
PROGRAMMABLE RESOLUTION: 9 to 12 Bits
PROGRAMMABLE THRESHOLD LIMITS
TWO-WIRE/SMBus
SERIAL INTERFACE
MINIMUM AND MAXIMUM TEMPERATURE
MONITORS
MULTIPLE INTERFACE ADDRESSES
ALERT/THERM2 PIN CONFIGURATION
DIODE FAULT DETECTION
DESCRIPTION
The TMP411 is a remote temperature sensor monitor with
a built-in local temperature sensor. The remote
temperature sensor diode-connected transistors are
typically low-cost, NPN- or PNP-type transistors or diodes
that are an integral part of microcontrollers,
microprocessors, or FPGAs.
Remote accuracy is
±1°C
for multiple IC manufacturers,
with no calibration needed. The Two-Wire serial interface
accepts SMBus write byte, read byte, send byte, and
receive byte commands to program the alarm thresholds
and to read temperature data.
Features that are included in the TMP411 are: series
resistance cancellation, programmable non-ideality factor,
programmable resolution, programmable threshold limits,
minimum and maximum temperature monitors, wide
remote temperature measurement range (up to +150°C),
diode fault detection, and temperature alert function.
The TMP411 is available in both MSOP-8 and SO-8
packages.
APPLICATIONS
D
D
D
D
D
D
D
D
LCD/DLP/LCOS PROJECTORS
SERVERS
INDUSTRIAL CONTROLLERS
CENTRAL OFFICE TELECOM EQUIPMENT
DESKTOP AND NOTEBOOK COMPUTERS
STORAGE AREA NETWORKS (SAN)
INDUSTRIAL AND MEDICAL
EQUIPMENT
PROCESSOR/FPGA
TEMPERATURE MONITORING
V+
1
V+
GND
5
N−Factor
Correction
One−
Shot
Register
Status Register
Interrupt
Configuration
Consecutive Alert
Configuration Register
Remote Temp High Limit
Remote THERM Limit
Remote Temp Low Limit
Local
Temperature
Register
T
L
THERM Hysteresis Register
Local Temp High Limit
Local THERM Limit
Conversion Rate
Register
D+ 2
3
D−
Remote
Temperature
Register
T
R
Temperature
Comparators
Local Temp Low Limit
Local Temperature Min/Max Register
Remote Temperature Min/Max Register
Manufacturer ID Register
Device ID Register
Configuration Register
Resolution Register
8
SCL
SDA
7
Bus Interface
Pointer Register
4
TMP411
THERM
ALERT/THERM2
6
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
DLP is a registered trademark of Texas Instruments. SMBus is a trademark of Intel Corp.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright
2006−2008, Texas Instruments Incorporated
www.ti.com