欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
  •  
  • 北京元坤伟业科技有限公司

         该会员已使用本站17年以上

  • B41868R4108M
  • 数量-
  • 厂家-
  • 封装-
  • 批号-
  • -
  • QQ:857273081QQ:857273081 复制
    QQ:1594462451QQ:1594462451 复制
  • 010-62104931、62106431、62104891、62104791 QQ:857273081QQ:1594462451
更多
  • B41868R4108M000图
  • 北京元坤伟业科技有限公司

     该会员已使用本站17年以上
  • B41868R4108M000
  • 数量5000 
  • 厂家EPCOS 
  • 封装贴/插片 
  • 批号16+ 
  • 百分百原装正品,现货库存
  • QQ:857273081QQ:857273081 复制
    QQ:1594462451QQ:1594462451 复制
  • 010-62104931 QQ:857273081QQ:1594462451
  • B41868R4108M图
  • 深圳市惊羽科技有限公司

     该会员已使用本站11年以上
  • B41868R4108M
  • 数量96800 
  • 厂家EPCOS-爱普科斯 
  • 封装车规-电解电容 
  • 批号▉▉:2年内 
  • ▉▉¥10一一有问必回一一有长期订货一备货HK仓库
  • QQ:43871025QQ:43871025 复制
  • 131-4700-5145---Q-微-恭-候---有-问-秒-回 QQ:43871025

产品型号B41868R4108M000的Datasheet PDF文件预览

Aluminum electrolytic capacitors  
Single-ended capacitors  
Series/Type:  
B41868  
Date:  
December 2006  
EPCOS AG 2007. Reproduction, publication and dissemination of this publication, enclosures hereto and the  
information contained therein without EPCOS' prior express consent is prohibited.  
Single-ended capacitors  
B41868  
Very high temperature capability 150 °C  
Long-life grade capacitors  
Applications  
Automotive electronics  
Industrial electronics  
Features  
High reliability and long useful life  
High ripple current capability  
Extended temperature range up to 150 °C  
Construction  
Radial leads  
Charge-discharge proof, polar  
Aluminum case with insulating sleeve  
Minus pole marking on the insulating sleeve  
Stand-off rubber seal  
Case with safety vent  
Delivery mode  
Terminal configurations and packing:  
Bulk  
Taped, Ammo pack  
Cut  
Kinked  
PAPR (protection against polarity reversal):  
crimped leads, J leads, bent leads  
Refer to chapter "Single-ended capacitors Taping, packing  
and lead configurations" for further details and ordering  
example.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 2 of 24  
B41868  
Very high temperature capability 150 °C  
Specifications and characteristics in brief  
Rated voltage VR  
10 ... 50 V DC  
Surge voltage VS  
1.15 VR  
Rated capacitance CR  
Capacitance tolerance  
47 ... 5600 µF  
±20% M  
Dissipation factor tan δ  
(20 °C, 120 Hz)  
For capacitance higher than 1000 µF add 0.02 for every increase of  
1000 µF.  
VR (V DC)  
10  
16  
25  
35  
50  
tan δ (max.)  
0.20  
0.16  
0.14  
0.12  
0.10  
Leakage current Ileak  
(20 °C, 5 min)  
Self-inductance ESL  
Diameter (mm)  
ESL (nH)  
12.5  
16  
26  
18  
34  
20  
Useful life  
150 °C, VR, IAC,R  
> 1000 h  
Requirements  
C/C  
tan δ  
Ileak  
≤ ±45% of initial value  
3 times initial specified limit  
initial specified limit  
Voltage endurance test  
150 °C, VR  
1000 h  
Post test requirements  
C/C  
tan δ  
Ileak  
≤ ±30% of initial value  
2 times initial specified limit  
initial specified limit  
Vibration resistance test To IEC 60068-2-6, test Fc:  
Displacement amplitude 0.75 mm, frequency range 10 … 2000 Hz,  
acceleration max. 20 g, duration 3 × 2 h.  
Capacitor rigidly clamped by the aluminum case.  
IEC climatic category  
Sectional specification  
To IEC 60068-1:  
55/150/56 (55 °C/+150 °C/56 days damp heat test)  
AEC-Q200, IEC 60384-4  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 3 of 24  
B41868  
Very high temperature capability 150 °C  
Dimensional drawing  
With stand-off rubber seal  
Diameters (mm): 10, 12.5, 16, 18  
Dimensions and weights  
Dimensions (mm)  
Approx. weight  
d +0.5  
10  
l
a ±0.5  
5.0  
5.0  
5.0  
5.0  
5.0  
7.5  
7.5  
7.5  
7.5  
7.5  
b
g
12.5 +1.0  
16 +1.0  
20 +2.0  
20 +2.0  
25 +2.0  
20 +2.0  
31.5 +2.0  
20 +2.0  
35 +2.0  
40 +2.0  
0.60 ±0.05  
0.60 ±0.05  
0.60 ±0.05  
0.60 ±0.05  
0.60 ±0.05  
0.80 ±0.05  
0.80 ±0.05  
0.80 ±0.1  
0.80 ±0.1  
0.80 ±0.1  
1.6  
1.9  
2.6  
3.6  
4.5  
5.5  
7.8  
8.0  
13.0  
16.0  
10  
10  
12.5  
12.5  
16  
16  
18  
18  
18  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 4 of 24  
B41868  
Very high temperature capability 150 °C  
Overview of available types  
VR (V DC)  
10  
16  
25  
35  
50  
Case dimensions d × l (mm)  
CR (µF)  
47  
10 × 12.5  
10 × 16  
10 × 20  
12.5 × 20  
12.5 × 25  
100  
10 × 12.5  
10 × 16  
10 × 20  
12.5 × 20  
10 × 20  
12.5 × 20  
12.5 × 25  
220  
10 × 16  
330  
10 × 16  
10 × 16  
10 × 16  
10 × 20  
470  
16 × 31.5  
18 × 20  
680  
18 × 20  
1000  
12.5 × 20  
12.5 × 25  
16 × 20  
16 × 31.5  
18 × 20  
16 × 31.5  
18 × 35  
18 × 40  
1200  
1500  
1800  
2200  
18 × 35  
18 × 40  
16 × 31.5  
18 × 20  
16 × 31.5  
18 × 20  
18 × 35  
18 × 40  
3300  
4700  
5600  
16 × 31.5  
18 × 35  
18 × 40  
18 × 35  
18 × 40  
Other voltage and capacitance ratings are available upon request.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 5 of 24  
B41868  
Very high temperature capability 150 °C  
Technical data and ordering codes  
CR Case ESRmax ESRmax ESRmax Zmax  
IAC,R  
IAC,max  
Ordering code  
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see  
20 °C d × l 40 °C 20 °C 20 °C 20 °C 150 °C 125 °C below)  
µF mm mA mA  
VR = 10 V DC  
330  
470  
10 × 16  
10 × 16  
12.5 × 20  
1.825 0.766 0.228 0.208  
1.825 0.538 0.228 0.208  
1.134 0.253 0.142 0.130  
426  
426  
673  
1475  
1341  
1475  
1861  
2325  
596  
596  
943  
2065  
1877  
2065  
2605  
3254  
B41868W3337M***  
B41868W3477M***  
B41868W3108M***  
B41868W3228M***  
B41868R3228M***  
B41868W3338M***  
B41868W3478M***  
B41868W3568M***  
1000  
2200  
2200  
3300  
4700  
5600  
16 × 31.5 0.418 0.126 0.052 0.049  
18 × 20 0.418 0.126 0.052 0.049  
16 × 31.5 0.418 0.090 0.052 0.049  
18 × 35  
18 × 40  
0.331 0.070 0.041 0.039  
0.233 0.063 0.029 0.028  
VR = 16 V DC  
220  
330  
470  
1000  
1000  
2200  
2200  
3300  
4700  
10 × 16  
1.825 0.919 0.228 0.208  
1.825 0.612 0.228 0.208  
1.316 0.430 0.164 0.147  
0.738 0.202 0.092 0.085  
0.763 0.202 0.095 0.088  
426  
426  
552  
905  
929  
1475  
1291  
1861  
2325  
596  
596  
773  
1266  
1301  
2065  
1807  
2605  
3254  
B41868W4227M***  
B41868W4337M***  
B41868W4477M***  
B41868W4108M***  
B41868R4108M***  
B41868W4228M***  
B41868R4228M***  
B41868W4338M***  
B41868R4478M***  
10 × 16  
10 × 20  
12.5 × 25  
16 × 20  
16 × 31.5 0.418 0.103 0.052 0.049  
18 × 20  
18 × 35  
18 × 40  
0.457 0.103 0.057 0.053  
0.331 0.077 0.041 0.039  
0.233 0.059 0.029 0.028  
VR = 25 V DC  
100  
220  
330  
10 × 12.5 3.099 1.768 0.387 0.349  
300  
426  
552  
419  
596  
773  
B41868W5107M***  
B41868W5227M***  
B41868W5337M***  
B41868W5477M***  
B41868W5108M***  
B41868R5108M***  
B41868W5228M***  
B41868W5338M***  
10 × 16  
10 × 20  
12.5 × 20  
1.825 0.804 0.228 0.208  
1.316 0.536 0.164 0.147  
1.134 0.376 0.142 0.130  
470  
673  
943  
1000  
1000  
2200  
3300  
16 × 31.5 0.418 0.177 0.052 0.049  
1475  
1291  
1861  
2325  
2065  
1807  
2605  
3254  
18 × 20  
18 × 35  
18 × 40  
0.457 0.177 0.057 0.053  
0.331 0.090 0.041 0.039  
0.233 0.069 0.029 0.028  
Composition of ordering code  
*** = Version  
000 = for standard leads, bulk  
001 = for kinked leads, bulk (for 10 mm)  
002 = for cut leads, bulk (for 10 mm)  
003 = for crimped leads, blister (for 16 mm)  
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)  
008 = for taped leads, Ammo pack, lead spacing F = 5 mm (from d × l = 10 × 12.5 mm to 12.5 × 25 mm)  
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 16 × 31.5 mm)  
012 = for bent 90° leads, blister (for 16 and 18 mm)  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 6 of 24  
B41868  
Very high temperature capability 150 °C  
Technical data and ordering codes  
CR Case ESRmax ESRmax ESRmax Zmax  
IAC,R  
IAC,max  
Ordering code  
120 Hz dimensions 10 kHz 120 Hz 10 kHz 100 kHz 100 kHz 100 kHz (composition see  
20 °C d × l 40 °C 20 °C 20 °C 20 °C 150 °C 125 °C below)  
µF mm mA mA  
VR = 35 V DC  
47  
100  
220  
330  
470  
10 × 12.5 3.719 3.225 0.465 0.419  
300  
426  
552  
673  
905  
1291  
1475  
1861  
2325  
419  
596  
773  
B41868W7476M***  
B41868W7107M***  
B41868W7227M***  
B41868W7337M***  
B41868W7477M***  
B41868W7687M***  
B41868W7108M***  
B41868W7158M***  
B41868W7188M***  
10 × 16  
10 × 20  
12.5 × 20  
12.5 × 25  
18 × 20  
1.825 1.516 0.228 0.208  
1.316 0.689 0.164 0.147  
1.134 0.459 0.142 0.130  
0.738 0.323 0.092 0.085  
0.457 0.223 0.057 0.053  
943  
1266  
1807  
2065  
2605  
3254  
680  
1000  
1500  
1800  
16 × 31.5 0.418 0.152 0.052 0.049  
18 × 35  
18 × 40  
0.331 0.101 0.041 0.039  
0.233 0.084 0.029 0.028  
VR = 50 V DC  
100  
220  
330  
470  
470  
10 × 20  
12.5 × 20  
12.5 × 25  
1.316 1.263 0.164 0.147  
1.134 0.574 0.142 0.130  
0.738 0.383 0.092 0.085  
552  
673  
905  
1475  
1291  
1861  
2325  
773  
943  
B41868W6107M***  
B41868W6227M***  
B41868W6337M***  
B41868W6477M***  
B41868R6477M***  
B41868W6108M***  
B41868W6128M***  
1266  
2065  
1807  
2605  
3254  
16 × 31.5 0.418 0.269 0.052 0.049  
18 × 20  
18 × 35  
18 × 40  
0.457 0.269 0.057 0.053  
0.331 0.126 0.041 0.039  
0.233 0.105 0.029 0.028  
1000  
1200  
Composition of ordering code  
*** = Version  
000 = for standard leads, bulk  
001 = for kinked leads, bulk (for 10 mm)  
002 = for cut leads, bulk (for 10 mm)  
003 = for crimped leads, blister (for 16 mm)  
004 = for J leads, blister (from d × l = 10 × 12.5 mm to 18 × 35 mm)  
008 = for taped leads, Ammo pack, lead spacing F = 5 mm (from d × l = 10 × 12.5 mm to 12.5 × 25 mm)  
009 = for taped leads, Ammo pack, lead spacing F = 7.5 mm (from d × l = 16 × 20 mm to 16 × 31.5 mm)  
012 = for bent 90° leads, blister (for 16 and 18 mm)  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 7 of 24  
B41868  
Very high temperature capability 150 °C  
Useful life  
depending on ambient temperature TA under ripple current operating conditions1)  
Frequency factor of permissible ripple current IAC versus frequency f  
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life  
graphs.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 8 of 24  
B41868  
Very high temperature capability 150 °C  
Taping, packing and lead configurations  
Taping  
Single-ended capacitors are available taped in Ammo pack from diameter 5 to 18 mm as follows:  
Lead spacing F = 2.5 mm ( d = 5 … 6.3 mm)  
Lead spacing F = 3.5 mm ( d = 8 mm)  
Lead spacing F = 5.0 mm ( d = 5 … 12.5 mm)  
Lead spacing F = 7.5 mm ( d = 16 ... 18 mm).  
Lead spacing 2.5 mm ( d = 5 ... 6.3 mm)  
Last 3 digits of ordering code: 007  
Dimensions in mm  
d
F
H
W
W0  
W1  
W2  
H0  
P
P0  
P1  
I1  
t
h  
D0  
5
2.5 18.5 18.0 5.5 9.0 1.5 16.0 12.7 12.7 5.1 1.0 0.7 1.0 4.0  
6.3  
Toler-  
ance  
+0.8  
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2  
02  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 9 of 24  
B41868  
Very high temperature capability 150 °C  
Lead spacing 3.5 mm ( d = 8 mm)  
Last 3 digits of ordering code: 006  
Dimensions in mm  
d
F
H
W
W0  
W1  
W2  
1.5  
P
P0  
P1  
I1  
t
h  
D0  
8
3.5  
18.5 18.0 12.5 9.0  
12.7 12.7 4.6  
1.0  
0.7  
1.0  
4.0  
Toler-  
ance  
+0.8  
02  
1.0  
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 10 of 24  
B41868  
Very high temperature capability 150 °C  
Lead spacing 5.0 mm ( d = 5 ... 8 mm)  
Last 3 digits of ordering code: 008  
Lead spacing 5.0 mm ( d = 10 ... 12.5 mm)  
Last 3 digits of ordering code: 008  
Dimensions in mm  
d
F
H
W
W0 W1 W2  
H0  
P
P0  
P1  
I1  
t
h  
D0  
5
5.0  
18.5 18.0 5.5 9.0 1.5  
16.0 12.7 12.7 3.85 1.0  
0.7 1.0  
4.0  
6.3  
8
20.0  
16.0 12.7 12.7 3.85  
10  
5.0  
19.0 18.0 12.5 9.0 1.5  
19.0  
12.7 12.7 3.85 1.0  
15.0 15.0 5.0  
0.7 1.0  
4.0  
12.5  
Toler-  
ance  
+0.8  
02  
±0.75 ±0.5 min. ±0.5 max. ±0.5 ±1.0 ±0.2 ±0.5 max. ±0.2 max. ±0.2  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 11 of 24  
B41868  
Very high temperature capability 150 °C  
Lead spacing 7.5 mm ( d = 16 ...18 mm)  
Last 3 digits of ordering code: 009  
Dimensions in mm  
d
F
H
W
W0  
W1  
W2  
1.5  
P
P0  
P1  
I1  
t
P h D0  
4.0  
16  
18 *)  
7.5 18.5 18.0 12.5 9.0  
30.0 15.0 3.75 1.0  
0.7  
0
0
Toler-  
ance  
0.5  
+0.75  
±0.8  
±0.5 min. ±0.5 max. ±1.0 ±0.2 ±0.5 max. ±0.2 ±1.0 ±1.0 ±0.2  
*) Available only for case dimensions 18 × 20, 18 × 25 and 18 × 31.5 mm  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 12 of 24  
B41868  
Very high temperature capability 150 °C  
Packing units and box dimensions  
Ammo pack  
Case size  
d × l  
Dimensions (mm)  
Packing  
units  
mm  
Amax  
345  
345  
345  
345  
345  
345  
345  
345  
345  
345  
315  
315  
315  
315  
315  
315  
Bmax  
55  
55  
55  
55  
60  
60  
65  
65  
65  
65  
65  
65  
65  
65  
65  
65  
Cmax  
240  
290  
240  
280  
200  
200  
280  
280  
280  
275  
275  
275  
275  
275  
275  
275  
pcs.  
5 × 11  
2000  
2000  
1000  
750  
500  
500  
500  
500  
500  
500  
300  
300  
300  
250  
250  
250  
6.3 × 11  
8 × 11.5  
10 × 12.5  
10 × 16  
10 × 20  
12.5 × 20  
12.5 × 25  
12.5 × 25  
12.5 × 30  
16 × 20  
16 × 25  
16 × 31.5  
18 × 20  
18 × 25  
18 × 31.5  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 13 of 24  
B41868  
Very high temperature capability 150 °C  
Kinked or cut leads  
Single-ended capacitors are available with kinked or cut leads. Other lead configurations also  
available upon request.  
Kinked leads  
Last 3 digits of ordering code: 001  
With stand-off rubber seal  
Case size  
d × l (mm)  
10 × 20  
Dimensions (mm)  
a ±0.5  
5.0  
12.5 × 20  
12.5 × 25  
12.5 × 30  
12.5 × 35  
12.5 × 40  
16 × 20  
5.0  
5.0  
5.0  
5.0  
5.0  
7.5  
16 × 25  
7.5  
16 × 31.5  
18 × 20  
7.5  
7.5  
18 × 25  
7.5  
18 × 31.5  
18 × 35  
7.5  
With flat rubber seal  
7.5  
18 × 40  
7.5  
20 × 20  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
20 × 25  
20 × 40  
22 × 30  
22 × 35  
22 × 40  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 14 of 24  
B41868  
Very high temperature capability 150 °C  
Cut leads  
Last 3 digits of ordering code: 002  
With stand-off rubber seal  
Case size  
d × l (mm)  
10 × 12.5  
10 × 16  
Dimensions (mm)  
a ±0.5  
5.0  
5.0  
10 × 20  
5.0  
12.5 × 20  
12.5 × 25  
12.5 × 30  
12.5 × 35  
12.5 × 40  
16 × 20  
5.0  
5.0  
5.0  
With flat rubber seal  
5.0  
5.0  
7.5  
16 × 25  
7.5  
16 × 31.5  
18 × 20  
7.5  
7.5  
18 × 25  
7.5  
18 × 31.5  
18 × 35  
7.5  
7.5  
18 × 40  
7.5  
20 × 20  
10.0  
10.0  
10.0  
20 × 25  
20 × 40  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 15 of 24  
B41868  
Very high temperature capability 150 °C  
PAPR leads (Protection Against Polarity Reversal)  
These lead configurations ensure correct placement of the capacitor on the PCB with regard to  
polarity. PAPR leads are available for diameters from 10 mm up to 20 mm.  
There are three configurations available: Crimped leads, J leads, bent 90° leads  
Crimped leads  
Last 3 digits of ordering code: 003  
With stand-off rubber seal  
With flat rubber seal  
Suggestion for PCB hole diameter  
Case size  
d × l (mm)  
16 × 20  
16 × 25  
16 × 31.5  
18 × 20  
18 × 25  
18 × 31.5  
18 × 35  
18 × 40  
20 × 20  
20 × 25  
20 × 40  
Dimensions (mm)  
B ±0.2  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
1.5  
C ±0.5  
3.0  
3.0  
3.0  
3.0  
3.0  
3.0  
3.0  
3.0  
3.0  
3.0  
3.0  
D ±0.1  
E ±0.1  
0.3  
0.3  
0.3  
0.3  
0.3  
0.3  
0.3  
0.3  
0.3  
0.3  
0.3  
a ±0.5  
b
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.3  
1.6  
1.6  
1.6  
7.5  
7.5  
0.8 ±0.05  
0.8 ±0.05  
0.8 ±0.05  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
1.0 ±0.1  
1.0 ±0.1  
1.0 ±0.1  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
10.0  
10.0  
10.0  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 16 of 24  
B41868  
Very high temperature capability 150 °C  
J leads  
Last 3 digits of ordering code: 004  
Suggestion for PCB hole diameter  
Case size  
d × l (mm)  
10 × 12.5  
10 × 16  
Dimensions (mm)  
C ±0.5  
3.2  
3.2  
3.2  
3.2  
3.2  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
3.5  
E ±0.5  
J ±0.2  
1.2  
1.2  
1.2  
1.2  
1.2  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
1.6  
a ±0.5  
5.0  
5.0  
5.0  
5.0  
5.0  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
7.5  
b
0.7  
0.7  
0.7  
0.7  
0.7  
0.7  
0.7  
0.7  
0.7  
0.7  
0.7  
0.7  
0.6 ±0.05  
0.6 ±0.05  
0.6 ±0.05  
0.6 ±0.05  
0.6 ±0.05  
0.8 ±0.05  
0.8 ±0.05  
0.8 ±0.05  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
10 × 20  
12.5 × 20  
12.5 × 25  
16 × 20  
16 × 25  
16 × 31.5  
18 × 20  
18 × 25  
18 × 31.5  
18 × 35  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 17 of 24  
B41868  
Very high temperature capability 150 °C  
Bent 90° leads for horizontal mounting pinning  
Last 3 digits of ordering code: 012  
Case size  
d × l (mm)  
16 × 20  
Dimensions (mm)  
C ±0.5  
4.0  
E ±0.5  
F ±0.5  
12.0  
12.0  
12.0  
13.0  
13.0  
13.0  
13.0  
13.0  
a ±0.5  
7.5  
b
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
0.8 ±0.05  
0.8 ±0.05  
0.8 ±0.05  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
0.8 ±0.1  
16 × 25  
4.0  
7.5  
16 × 31.5  
18 × 20  
4.0  
7.5  
4.0  
7.5  
18 × 25  
4.0  
7.5  
18 × 31.5  
18 × 35  
4.0  
7.5  
4.0  
7.5  
18 × 40  
4.0  
7.5  
Bent leads for diameter 12.5 mm available upon request.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 18 of 24  
B41868  
Very high temperature capability 150 °C  
Overview of packing units and code numbers for case sizes 5 × 11 ... 16 × 31.5  
PAPR  
Case size  
d × l  
Stan- Taped,  
dard, Ammo pack  
bulk  
Kinked Cut  
Crimped J leads Bent 90°  
leads,  
bulk  
leads, leads  
leads,  
blister  
bulk  
pcs.  
mm  
pcs.  
pcs.  
pcs.  
pcs.  
pcs.  
pcs.  
5 × 11  
2000 2000  
2500 2000  
1000 1000  
1000 750  
6.3 × 11  
8 × 11.5  
10 × 12.5  
10 × 16  
10 × 20  
12.5 × 20  
12.5 × 25  
12.5 × 30  
12.5 × 35  
12.5 × 40  
16 × 20  
16 × 25  
16 × 31.5  
1000  
1000  
500  
350  
500  
175  
175  
175  
200  
200  
250  
002  
675  
675  
500  
300  
225  
180  
150  
150  
200  
200  
344  
004  
100  
500  
350  
250  
200  
175  
175  
250  
250  
200  
500  
500  
500  
350  
500  
175  
175  
175  
200  
200  
250  
001  
1)  
1)  
1)  
1)  
1)  
500  
500  
500  
-
-
300  
200  
200  
344  
003  
120  
120  
120  
012  
300  
300  
The last three 000  
digits of the  
complete  
ordering code  
state the lead  
configuration  
Code F (mm) d (mm)  
006  
007  
008  
009  
3.5  
2.5  
5
8
5...6.3  
5...12.5  
16...18  
7.5  
1) Available upon request  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 19 of 24  
B41868  
Very high temperature capability 150 °C  
Overview of packing units and code numbers for case sizes 18 × 20 ... 25 × 40  
PAPR  
Case size  
d × l  
Stan- Taped,  
dard, Ammo pack  
bulk  
Kinked Cut  
Crimped J leads Bent 90°  
leads,  
bulk  
leads, leads  
leads,  
blister  
bulk  
pcs.  
175  
150  
100  
100  
100  
125  
125  
100  
100  
100  
100  
100  
100  
mm  
pcs.  
175  
150  
100  
100  
125  
125  
125  
100  
100  
100  
80  
pcs.  
pcs.  
175  
150  
100  
100  
100  
125  
125  
100  
100  
100  
100  
100  
100  
100  
001  
pcs.  
200  
200  
150  
150  
120  
200  
200  
120  
120  
120  
pcs.  
200  
200  
150  
150  
pcs.  
120  
120  
120  
150  
72  
18 × 20  
18 × 25  
18 × 31.5  
18 × 35  
18 × 40  
20 × 20  
20 × 25  
20 × 30  
20 × 35  
20 × 40  
22 × 30  
22 × 35  
22 × 40  
25 × 40  
250  
250  
250  
80  
80  
40  
The last three 000  
digits of the  
complete  
ordering code  
state the lead  
configuration  
Code F (mm) d (mm)  
002  
003  
004  
012  
007  
008  
009  
2.5  
5
7.5  
4...6.3  
6.3...12.5  
16...18  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 20 of 24  
B41868  
Very high temperature capability 150 °C  
Cautions and warnings  
Personal safety  
The electrolytes used by EPCOS have not only been optimized with a view to the intended  
application, but also with regard to health and environmental compatibility. They do not contain  
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide  
(DMAC).  
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They  
contain flame-retarding substances which will quickly extinguish any flame that may have been  
ignited.  
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce  
operating electrolytes. However, in exceptional cases, such materials must be used in order to  
achieve specific physical and electrical properties because no safe substitute materials are  
currently known. However, the amount of dangerous materials used in our products has been  
limited to an absolute minimum. Nevertheless, the following rules should be observed when  
handling Al electrolytic capacitors:  
Any escaping electrolyte should not come into contact with eyes or skin.  
If electrolyte does come into contact with the skin, wash the affected parts immediately with  
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If  
symptoms persist, seek medical treatment.  
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be  
well ventilated. Clothing that has been contaminated by electrolyte must be changed and  
rinsed in water.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 21 of 24  
B41868  
Very high temperature capability 150 °C  
Product safety  
The table below summarize the safety instructions that must be observed without fail. A detailed  
description can be found in the relevant sections of chapter "General technical information".  
Topic  
Safety information  
Reference  
Chapter "General  
technical information"  
Polarity  
Make sure that polar capacitors are connected  
with the right polarity.  
1
"Basic construction of  
aluminum electrolytic  
capacitors"  
Reverse voltage  
Voltages polarity classes should be prevented by 3.1.6  
connecting a diode.  
"Reverse voltage"  
Upper category  
temperature  
Do not exceed the upper category temperatur.  
7.2  
"Maximum permissible  
operating temperature"  
Maintenance  
Make periodic inspections of the capacitors.  
10  
Before the inspection, make sure that the power "Maintenance"  
supply is turned off and carefully discharge the  
electricity of the capacitors.  
Do not apply any mechanical stress to the  
capacitor terminals.  
Mounting  
position of screw  
terminal capacitors  
Do not mount the capacitor with the terminals  
(safety vent) upside down.  
11.1.  
"Mounting positions of  
capacitors with screw  
terminals"  
Mounting of  
single-ended  
capacitors  
The internal structure of single-ended capacitors 11.4  
might be damaged if excessive force is applied to "Mounting  
the lead wires.  
considerations for  
Avoid any compressive, tensile or flexural stress. single-ended capacitors"  
Do not move the capacitor after soldering to PC  
board.  
Do not pick up the PC board by the soldered  
capacitor.  
Do not insert the capacitor on the PC board with a  
hole space different to the lead space specified.  
Robustness of  
terminals  
The following maximum tightening torques must  
not be exceeded when connecting screw  
11.3  
"Mounting torques"  
terminals:  
M5: 2 Nm  
M6: 2.5 Nm  
Soldering  
Do not exceed the specified time or temperature 11.5  
limits during soldering. "Soldering"  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 22 of 24  
B41868  
Very high temperature capability 150 °C  
Topic  
Safety information  
Reference  
Chapter "General  
technical information"  
Soldering,  
cleaning agents  
Do not allow halogenated hydrocarbons to come 11.6  
into contact with aluminum electrolytic capacitors. "Cleaning agents"  
Passive  
Avoid external energy, such as fire or electricity.  
8.1  
flammability  
"Passive flammability"  
Active  
Avoid overload of the capacitors.  
8.2  
flammability  
"Active flammability"  
Reference  
Chapter "Capacitors  
with screw terminals"  
Breakdown strength Do not damage the insulating sleeve, especially  
"Screw terminals -  
accessories"  
of insulating  
sleeves  
when ring clips are used for mounting.  
Please read Cautions and warnings and  
Important notes at the end of this document.  
Page 23 of 24  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical re-  
quirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately incum-  
bent on the customer to check and decide whether an EPCOS product with the properties de-  
scribed in the product specification is suitable for use in a particular customer application.  
2. We also point out that in individual cases, a malfunction of passive electronic compon-  
ents or failure before the end of their usual service life cannot be completely ruled out  
in the current state of the art, even if they are operated as specified. In customer applica-  
tions requiring a very high level of operational safety and especially in customer applications  
in which the malfunction or failure of a passive electronic component could endanger human  
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured  
by means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by  
third parties in the event of malfunction or failure of a passive electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as “hazardous”). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order. We also  
reserve the right to discontinue production and delivery of products. Consequently, we  
cannot guarantee that all products named in this publication will always be available.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-  
sion of the “General Terms of Delivery for Products and Services in the Electrical In-  
dustry” published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, EPCOS-JONES, BAOKE, Alu-X, CeraDiode, CSSP, MLSC,  
PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K,  
UltraCap, WindCap are trademarks registered or pending in Europe and in other countries.  
Further information will be found on the Internet at www.epcos.com/trademarks.  
Page 24 of 24  
配单直通车
B41868R4108M000产品参数
型号:B41868R4108M000
是否无铅: 不含铅
是否Rohs认证: 符合
生命周期:Obsolete
包装说明:,
Reach Compliance Code:compliant
ECCN代码:EAR99
风险等级:5.84
其他特性:STANDARD: IEC60384-4
电容:1000 µF
电容器类型:ALUMINUM ELECTROLYTIC CAPACITOR
直径:16 mm
介电材料:ALUMINUM (WET)
ESR:202 m Ω
JESD-609代码:e3
漏电流:0.16 mA
长度:20 mm
安装特点:THROUGH HOLE MOUNT
负容差:20%
端子数量:2
最高工作温度:150 °C
最低工作温度:-55 °C
封装形状:CYLINDRICAL PACKAGE
封装形式:Radial
包装方法:BULK
极性:POLARIZED
正容差:20%
额定(直流)电压(URdc):16 V
参考标准:AEC-Q200
纹波电流:929 mA
表面贴装:NO
Delta切线:0.16
端子面层:Matte Tin (Sn)
端子节距:7.5 mm
端子形状:WIRE
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!