C901U150JZNDAAWL45全新原装原理图各脚功能电路原理芯片引脚定义-中国IC网-芯三七

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated,

AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Overview

KEMET’s 900 encapsulated radial leaded ceramic disc

capacitors are speciﬁcally designed for interference-sup-

pression AC line ﬁltering applications. Having internation-

ally recognized safety certiﬁcations, these capacitors are

well-suited for applications that require keeping potentially

disruptive or damaging line transients and EMI out of sus-

ceptible equipment. They are also an ideal solution when

needing to suppress line disturbances at the source.

With a working voltage of 400 VAC in line-to-line (Class X)

and 250 VAC in line-to-ground (Class Y) applications, these

safety capacitors meet the impulse test criteria outlined in

IEC Standard 60384. Meeting subclass X1 and Y2 require-

ments, these devices are certiﬁed to withstand impulses up

to 4 KV (X1) and 5 KV (Y2) respectively. These encapsulated

devices also meet the ﬂame test requirements outlined in UL

Standard 94V–0.

Safety Certiﬁed Capacitors are classiﬁed as either X and/

or Y capacitors. Class X capacitors are primarily used in

line-to-line (across-the-line) applications. In this applica-

tion, there is no danger of electric shock to humans should

the capacitor fail, but could result in a risk of ﬁre. The class

Y capacitor is primarily used in line-to-ground (line by-pass)

applications. In this application, failure of the capacitor

could lead to danger of electric shock.

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Ordering Information

C9

8

1

U

103

M

Y

V

D

A

7317

Ceramic

Series

Body

Diameter

Lead

Spacing^1,2,4

Capacitance Capacitance

Rated Dielectric/

Voltage Temp. Char.

Lead

Conﬁg.^1,3,4

Failure Packaging

Spec.

Design

Code (pF)

Tolerance

Rate

(C-Spec)

C9 =

0 = 7.0 mm

5 = 5.0 mm

7 = 7.5 mm

1 = 10.0 mm

U =

Safety

Two

J = ±5%

Y =

X1 400 Y = Y5P

VAC/ W = Y5U

Y2 250 V = Y5V

VAC

S = SL

D = A = Straight

Disc B = Vertical

Kink

A =

See

Ceramic 1 = 8.0 mm

900

signiﬁcant K = ±10%

digits and M = ±20%

number of

N/A "Packaging

C-Spec

2 = 9.0 mm

3 = 10.0 mm

4 = 11.0 mm

6 = 13.0 mm

8 = 15.0 mm

C = Outside

Kink

D = Inside

Kink

Ordering

Options

Table"

zeroes

below

¹Due to a high risk of arcing, "Inside Kink" lead conﬁguration cannot be combined with the 5 mm lead spacing option. The "Inside Kink" option is only

available on capacitors with lead spacing of 7.5 mm or greater. A potential for arcing may exist when combining the "Inside Kink" lead conﬁguration

with a 7.5 mm lead spacing option, especially in high humidity environments and/or when exposure to voltages and transients may impact creepage

and clearance requirements.

²Capacitor body diameter will limit available lead spacing and packaging options. See "Dimensions" and "Product Ordering Codes and Ratings" sections

of this document to determine availability.

³"Vertical Kink", "Outside Kink" and "Inside Kink" lead conﬁgurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead

length is only available on capacitors with straight leads (lead conﬁguration ordering code "A"). For nonstandard lead length inquiries, please contact

KEMET.

⁴Bulk packaging lead length availability is dependent upon "Lead Conﬁguration" and "Lead Spacing." See "Dimensions" section of this document to

verify availability of a speciﬁc lead length option. For nonstandard lead length inquiries, please contact KEMET.

One world. One KEMET

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017

1

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Packaging C-Spec Ordering Options Table

Lead Length

(mm)^2,3

Packaging

Ordering Code (C-Spec)

Packaging Type

20.0 +1.5/−1.0 (straight leads)

18.0 +2.0/−0 (preformed leads¹)

Ammo Pack

7317

3.0 ±1.0

3.5 ±1.0

WL30

WL35

WL40

WL45

WL50

WL20

4.0 ±1.0

Bulk Bag

4.5 ±1.0

5.0 ±1.0

20.0 minimum⁴

¹Preformed (crimped) lead conﬁgurations include "Vertical Kink", "Outside Kink" and "Inside Kink". See "Lead Conﬁgurations" and "Ordering

Information" sections of this document for further details.

²"Vertical Kink", "Outside Kink" and "Inside Kink" lead conﬁgurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead

length is only available on capacitors with straight leads (lead conﬁguration ordering code "A"). For nonstandard lead length inquiries, please contact

KEMET.

³For nonstandard lead length inquiries, please contact KEMET.

⁴Lead length of 20.0 mm minimum only available for straight leads.

Beneﬁts

• Safety standard recognized (IEC 60384–14)

• Reliable operation up to 125°C

• Class X1/Y2

• 5.0 mm, 7.5 mm, and 10 mm lead spacing

• Lead (Pb)-free and RoHS Compliant

• Halogen-free

• Capacitance offerings ranging from 10 pF up to 10 nF

• Available capacitance tolerances of ±5%, ±10%, and ±20%

• High reliability

• Preformed (crimped) or straight lead conﬁgurations

• Non-polar device, minimizing installation concerns

• Encapsulation meets ﬂammability standard UL 94V–0

Applications

Typical applications include:

• Line-to-line (Class X) ﬁltering

• Line-to-ground (Class Y) ﬁltering

• Antenna coupling

• Primary and secondary coupling (switching power supplies)

• Line disturbances suppression (motors and motor controls, relays, switching power supplies, and inverters)

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017

2

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Lead Conﬁgurations

Straight

Vertical Kink

Outside Kink

Inside Kink¹

D

T

D

T

D

T

D

T

ꢁꢂ0

ꢃaꢄimum

ꢄꢁ0

ꢂaꢃimum

ꢄꢁ0

ꢂaꢃimum

ꢄꢁ0

ꢂaꢃimum

5ꢁ0 ꢂaꢃimum

4ꢁ0 ꢂaꢃimum

5ꢁ0 ꢂaꢃimum

LL

ꢀ

S

¹Due to a high risk of arcing, the "Inside Kink" lead conﬁguration option cannot me combined with 5 mm lead spacing ("S" dimension above). The "Inside

Kink" option is only available on devices with lead spacing of 7.5 mm or 10 mm.

Dimensions – Millimeters

S

D

T

e

ØF

Lead

Spacing

Tolerance

Lead

Conﬁguration

Lead

Body

Thickness

Lead

Meniscus

Lead

Diameter

Ordering Code¹

Spacing²

Diameter²

5.0

7.5

±0.8

±1.0

±0.8

±1.0

±0.8

±1.0

Straight

A

B

10.0

5.0

Vertical Kink

(Preformed)

7.5

See Table 1 –

"Product Ordering Codes

and Ratings"

3.0

maximum

10.0

5.0

0.55 ±0.1

Outside Kink

(Preformed)

C

7.5

10.0

7.5

Inside Kink

(Preformed)

D

10.0

¹Lead Conﬁguration is identiﬁed in the 13th character of the ordering code. See "Lead Conﬁguration" and "Ordering Information" sections of this

document for further details.

²Body diameter of capacitor will limit available lead spacing and packaging options. See "Product Ordering Codes and Ratings" sections of this

document for further details.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017

3

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Approval Standard and Certiﬁcation No.

Safety Standard

Standard No.

Subclass

Working Voltage

400 VAC

Certiﬁcate No.

X1

Y2

X1

Y2

VDE

(ENEC)

IEC 60384–14

40036415

250 VAC

400VAC

UL

CAN/CSA

UL 60384–14 and

E356389

E60384–14

250VAC

These devices are VDE/ENEC and UL recognized for antenna coupling and AC line-to-line (class X) and line-to-ground (class Y) applications per

IEC60384–14 and UL 60384–14.

Environmental Compliance

These devices are Halogen free and RoHS Compliant. They meet all requirements set forth by both EU and China RoHS

directives.

General Speciﬁcations/Performance Characteristics

Dielectric/Temperature Characteristic

SL

Y5P

Y5U

Y5V

Operating Temperature Range:

−40°C to +125°C

Capacitance Change with Reference to

+25°C and 0 VDC Applied (TCC):

−1,000 ~ +350 ppm/°C

±10%

+20%/−55%

~ +30%/−80%

Dielectric Withstanding Voltage (7.5 mm and 10 mm

Lead Spacing)¹

2,600 VAC

(60±5 seconds at 25°C)

Dielectric Withstanding Voltage (5 mm Lead

Spacing)¹

2,000 VAC

(60±5 seconds at 25°C)

30 pF and above: ≥ 1,000

Below 30 pF: ≥ 400 +(20xC)*

Quality Factor (Q)

See “Dissipation Factor”

Dissipation Factor (tanδ) at +25°C²

Insulation Resistance (IR) Limit at +25°C

*C = Nominal capacitance

2.50%

5.0%

See “Quality Factor”

10,000 MΩ Minimum

(500 VDC applied for 60±5 seconds at 25°C)

¹The distance between the adjacent leads of the component (also referred to as "lead spacing") governs Dielectric Withstanding Voltage (DWV) limit.

²Capacitance and Dissipation Factor (DF) measured under the following conditions:

SL: 1 MHz ± 100 kHz and 1.0 ±0.2 Vrms

X5P, Y5U and Y5V: 1 kHz ± 50 Hz and 1.0 ±0.2 Vrms

Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known

as Automatic Level Control (ALC). The ALC feature should be switched to "ON."

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017

4

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Table 1 – Product Ordering Codes and Ratings

Dimensions (mm)

Lead Spacing

Dielectric/

Temp. Char.

KEMET

Part Number

Capacitance

Tolerance

Capacitance

Body Diameter

(Maximum)

Body Thickness

(Maximum)

Lead

Diameter

Bulk

Ammo

Packaging Packaging

C90(1)U100JYSD(2)A(3)

C90(1)U120JYSD(2)A(3)

C90(1)U150JYSD(2)A(3)

C90(1)U180JYSD(2)A(3)

C90(1)U200JYSD(2)A(3)

C90(1)U220JYSD(2)A(3)

C90(1)U240JYSD(2)A(3)

C90(1)U270JYSD(2)A(3)

C90(1)U300JYSD(2)A(3)

C90(1)U330JYSD(2)A(3)

C90(1)U360JYSD(2)A(3)

C90(1)U390JYSD(2)A(3)

C90(1)U470JYSD(2)A(3)

C90(1)U500JYSD(2)A(3)

C90(1)U510JYSD(2)A(3)

C91(1)U560JYSD(2)A(3)

C91(1)U620JYSD(2)A(3)

C91(1)U680JYSD(2)A(3)

C91(1)U750JYSD(2)A(3)

C92(1)U820JYSD(2)A(3)

C93(1)U101JYSD(2)A(3)

10 pF

12 pF

15 pF

18 pF

20 pF

22 pF

24 pF

27 pF

30 pF

33 pF

36 pF

39 pF

47 pF

50 pF

51 pF

56 pF

62 pF

68 pF

75 pF

82 pF

100 pF

7.0

5 mm,

7.5 mm,

or

SL

±5%

5.0

0.55 ±0.1

10 mm

8.0

9.0

10.0

C90(1)U101KYYD(2)A(3)

C90(1)U151KYYD(2)A(3)

C90(1)U221KYYD(2)A(3)

C90(1)U331KYYD(2)A(3)

C90(1)U471KYYD(2)A(3)

C91(1)U561KYYD(2)A(3)

C91(1)U681KYYD(2)A(3)

C92(1)U821KYYD(2)A(3)

C92(1)U102KYYD(2)A(3)

100 pF

150 pF

220 pF

330 pF

470 pF

560 pF

680 pF

820 pF

1,000 pF

7.0

5 mm,

7.5 mm,

or

Y5P

±10%

5.0

0.55 ±0.1

10 mm

8.0

9.0

C90(1)U102MYWD(2)A(3)

C92(1)U152MYWD(2)A(3)

C92(1)U222MYWD(2)A(3)

C94(1)U332MYWD(2)A(3)

C96(1)U392MYWD(2)A(3)

C96(1)U472MYWD(2)A(3)

1,000 pF

1,500 pF

2,200 pF

3,300 pF

3,900 pF

4,700 pF

7.0

9.0

5 mm, 7.5 mm, or 10 mm

7.5 mm or 10 mm

Y5U

±20%

5.0

0.55 ±0.1

11.0

13.0

C90(1)U102MYVD(2)A(3)

C90(1)U152MYVD(2)A(3)

C90(1)U222MYVD(2)A(3)

C92(1)U332MYVD(2)A(3)

C94(1)U392MYVD(2)A(3)

C94(1)U472MYVD(2)A(3)

C96(1)U682MYVD(2)A(3)

C98(1)U103MYVD(2)A(3)

1,000 pF

1,500 pF

2,200 pF

3,300 pF

3,900 pF

4,700 pF

6,800 pF

10,000 pF

7.0

5 mm, 7.5 mm, or 10 mm

7.5 mm or 10 mm

Lead Spacing

9.0

Y5V

±20%

0.55 ±0.1

11.0

13.0

15.0

Body Diameter

(Maximum)

Body Thickness

(Maximum)

KEMET Part Number

Capacitance

Capacitance Tolerance

Lead Diameter

(1) To properly complete ordering code, insert the one-digit numeric code to reﬂect required lead spacing: (Note that select capacitance values and packaging

options may limit lead spacing availability. See table above to verify availability.)

5 = 5.0 mm

7 = 7.5 mm

1 = 10.0 mm

(2) To properly complete ordering code, insert the one-digit character code to reﬂect the required lead conﬁguration: (See "Lead Conﬁguration" section of this

document, page 2, for further details.)

A = Straight

B = Vertical Kink

C = Outside Kink

D = Inside Kink (not available with 5 mm lead spacing option)

(3) To properly complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See "Dimensions" section of this

document, page 2, for available options.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017

5

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Table 2 – Performance & Reliability: Test Methods and Conditions

Item

Speciﬁcation

Test Method

−40°C to +125°C

Operating Temperature Range

The capacitor shall not be damaged when voltage is applied

between the lead wires for 60 seconds.

Between lead

wires

No failures

2,000 VAC(rms) – 5.0 mm lead spacing

2,600 VAC(rms) – 7.5 mm and 10 mm lead spacing

The terminals (leads) of the capacitor

shall be connected together. A metal foil

is tightly wrapped around the body of the

capacitor at a distance of about 3 to 4 mm

Dielectric

Strength

ꢀetal

ꢁoil

Body Insulation

No failures

from each terminal. The capacitor is then

aꢃout

ꢄ to 4 mm

inserted into a container ﬁlled with metal

balls approximately 1 mm in diameter. 2,600

VAC(rms) is applied for 60 seconds between

the capacitor lead wires and metal balls.

ꢀetal

ꢂalls

The insulation resistance shall be measured with 500 ±50 VDC

applied after 60 ±5 seconds of charging.

Insulation Resistance (IR)

10,000 MΩ minimum

Capacitance

Within speciﬁed tolerance

Temperature

Characteristics

Speciﬁcation

Y5P, Y5U and Y5V: Capacitance is measured at 1 kHz ±20% and 5

Vrms or less. (20 ±2°C)

SL: Capacitance is measured at 1 MHz ±20% and 1.0 ±0.2 Vrms

(25°C)

Y5P, Y5U

DF ≤ 2.5%

DF ≤ 5.0%

Y5V

Dissipation Factor (DF) or Q

≥ 30 pF: Q ≥ 1000

< 30 pF: Q ≥ 400

+(20 x C)

SL

C = Nominal

capacitance

A capacitance measurement is made at each step speciﬁed:

Step

Temperature

+20 ±2°C

−25 ±2°C

Temperature

Characteristics

Capacitance

Change

1

2

Y5P

Y5U

Y5V

Within ±10%

3

+20 ±2°C

+85 ±2°C

+20 ±2°C

Temperature Characteristics

Within +20%/−55%

Within ~+30%/−80%

4

5

−1,000 ~+350 ppm°C

(+20°C ~+85°C)

SL

Pretreatment:

Capacitor is stored at 85 ±2°C for 1 hour and then placed at room

condition¹for 24 ±2 hours before measurement.

With the termination in its normal position, the specimen is held

by its body in such a manner that the axis of the termination is

vertical; a tensile force of 10 N is applied to the termination in the

direction of its axis and acting in a direction away from the body

of the specimen.

Lead wire or capacitor body shall not

Tensile

break.

With the termination in its normal position, the specimen is held

by its body in such a manner that the axis of the termination is

vertical; a mass force of 5 N is then suspended from the end of

the termination. The body of the specimen is then inclined within

a period of 2 to 3 seconds, through an angle of approximately 90°

in the vertical plane and then resumed to its initial position over

the same period of time; this operation constitutes one bend.

One bend immediately followed by a second bend in the opposite

direction.

Terminal

Strength

Lead wire or capacitor body shall not

Bending

break.

¹“Room Condition” is deﬁned as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017

6

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Table 2 – Performance & Reliability: Test Methods and Conditions cont'd

Item

Speciﬁcation

Test Method

The lead wire of the capacitor is dipped into molten solder for 5

±0.5 seconds. The depth of immersion is up to 1.5 mm

(+5/−0 mm) from the root of lead wires.

Solder Temperature: lead-free solder (Sn-3Ag – 0.5Cu)

245°C ±5°C.

Lead wire should have a uniform coating

of solder in the axial direction and over

3/4 of its circumference.

Solderability

As shown in the ﬁgure below, the lead wires are immersed in

molten solder up to 1.5 mm(+5/−0 mm) from the end of the epoxy

meniscus (root of lead wire).

No visual defect

1,000 MΩ

Appearance

IR

Duration/Solder Temp: 3.5 ±0.5 seconds/350°C ±10°C or 10 ±1

seconds/260°C ±5°C

Dielectric

Strength

Per item 1

Tꢂermal

Screen

Capacitor

Soldering Effect

(Non-Preheat)

1ꢁ5 to

2ꢁ0 mm

ꢀolten

Solder

Y5P, Y5U and Y5V: within ±10%

Capacitance SL: within ±2.5% or ±0.25 pF, whichever is

Pretreatment: Capacitor is stored at 85°C ±2°C for 1 hour and

then placed at room condition¹for 24 ±2 hours before initial

measurements.

larger.

Post-treatment: Capacitor is stored for 1 to 2 hours at room

condition¹.

Capacitor is stored at 120°C +0/−5°C for 60 +0/−5 seconds.

Then, as shown in the ﬁgure below , the lead wires are immersed

in molten solder up to 1.5 mm (+5/−0mm) from the end of the

epoxy meniscus (root of lead wire).

Appearance

No visual defect

1,000 MΩ

IR

Dielectric

Strength

Duration/Solder Temperature 7.5+0/−1 second/260°C ±5°C.

Per item 1

Tꢂermal

Screen

Capacitor

Soldering Effect

(Preheat)

1ꢁ5 to

2ꢁ0 mm

ꢀolten

Solder

Y5P, Y5U and Y5V: within ±10%

Capacitance SL: within ±2.5% or ±0.25 pF, whichever is

Pretreatment: Capacitor is stored at 85°C ±2°C for 1 hour and

then placed at room condition¹for 24 ±2 hours before initial

measurements.

larger.

Post-treatment: Capacitor is stored for 1 to 2 hours at room

condition¹.

Appearance

Capacitance

No visual defect

Steady State Humidity:

Load Humidity:

Temperature

Characteristics

Capacitance

Change

Y5P

Y5U

Y5V

Within ±10%

Within ±20%

Within ±30%

90 to 95% humidity at 40°C

±2°C for 500 ±12 hours with

full rated voltage applied.

Within ±2.5% or

±0.25 pF, whichever

is larger.

90 to 95% humidity at 40°C

±2°C for 500 ±12 hours.

SL

Biased Humidity

Post-treatment:

Y5P and Y5U: 5.0% maximum

Capacitor is stored for 1 to 2

DF

Q

Capacitor is stored for 1 to 2

hours at room condition¹.

Y5V: 7.5% maximum

SL: Less than 30 pF:

hours at room condition¹.

Q ≥ 100 + 10 × C/3

More than 30 pF: Q ≥ 200

C = Nominal capacitance

Y5P, Y5V and Y5U: 3,000 MΩ minimum

SL: 1,000 MΩ minimum

IR

Dielectric

Strength

No failures

¹“Room Condition” is deﬁned as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa.

7

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Table 2 – Performance & Reliability: Test Methods and Conditions cont'd

Item

Speciﬁcation

Test Method

Impulse Voltage: Each individual capacitor is subjected to three 5

No visual defect

Appearance

kv impulses prior to life testing.

Y5P, Y5V and Y5U: within ±20%

SL: within ±3 or ±0.3 pF,

whichever is larger.

Capacitance

Change

Cꢀ tr td

ꢀ_ꢀR

Vp

(uꢀ) (uS) (uS)

0ꢀ01 1ꢀ2 4ꢀ

0ꢀ1 1ꢀ5 4ꢀ

0ꢀ9Vp

ꢀ_ꢀꢀ

3,000 MΩ minimum

SL: 1,000 MΩ minimum

IR

0ꢀ5Vp

High

Temperature

Life

tr

td

Dielectric

Strength

Time

No failures

Capacitors are placed in a circulating air oven for a period of

1,000 hours. The air in the oven is maintained at a temperature of

125°C ±2 throughout the test. The capacitors are subjected to AC

425 Vrms. Each hour the voltage is increased to AC 1,000 Vrms

for 0.1 seconds.

The capacitor is exposed to a ﬂame for 15 seconds and then

removed for 15 seconds. This test is repeated for 5 cycles.

The capacitor ﬂame extinguishes as

follows:

Capacitor

ꢂlame

Cycle

Time

ꢀꢁ

Flame Test

30 seconds

maximum

ꢃꢄ

1 ~ 4

12ꢀ

60 seconds

maximum

Gas ꢆurner

5

20ꢅ

(ꢇnitꢈmm)

The capacitors are individually wrapped in at least one, but not

more than two, complete layers of cheesecloth. They are then

subjected to 20 discharges. The interval between successive

discharges is 5 seconds. The VAC is maintained for 2 minutes

after the last discharge.

ꢁ

L₁

L₂

R

S₁

C₁

Vac

C₂

L_ꢀ

C_ꢀC_X

L₄

C_t

Vt

S₂

Tr

ꢂscilloscope

C_{1, 2}

L_1-4

R

1 μF ±10%

C₃

Cx

V_AC

V_R

0.033 μF ±5% 10 kV

Test capacitor

VR ±5%

Active Flammability

The cheesecloth should not ignite.

1.5 Mh ±20% 16A Rod core choke

100 ±2%

Ct

F

3 μF ±5% 10 kV

Rated Voltage

Voltage applied to Ct

Fuse, Rated 10A

Vt

Vꢀ

5ꢁV

time

¹“Room Condition” is deﬁned as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017

8

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Table 2 – Performance & Reliability: Test Methods and Conditions cont'd

Item

Speciﬁcation

Test Method

The capacitor under test is held into a ﬂame and in a position

which best promotes burning. Each specimen is exposed to the

ﬂame once.

Test Specimen

200

ꢀ5mm

45ꢃ

Tissue

The burning time should not exceed 30

seconds.

The tissue paper should not ignite.

Passive Flammability

Aꢁout 10mm

Tꢄicꢅ ꢆoard

Time of exposure to ﬂame:

Length of ﬂame:

30 seconds

12 ±1 mm

35 mm minimum

0.5 ±0.1 mm

Gas burner length:

Inside diameter:

Outside diameter:

Gas butane gas purity:

0.9 mm maximum

95% minimum

Appearance

No visual defect

Temperature

Characteristics

Capacitance

Change

The capacitor is subjected to 5 temperature cycles.

Temperature Cycle

Dwell

SL

Y5P

Within ±5%

Within ±10%

Within ±20%

Capacitance

Transition

Time

Step Temperature (°C)

Time

Y5U, Y5V

(minutes) (minutes)

1

2

3

4

−40 +0/−3

Room temperature

125 +3/−0

30

SL

≥ 30 pF: Q ≥ 350

< 30 pF: Q ≥ 275

+5/2C

C = Nominal

capacitance

Temperature

3

Cycle

3

30

DF/Q

IR

Room temperature

3

Y5P

DF ≤ 5%

Pretreatment: Capacitor shall be stored at 85 ±2 for 1 hour then

placed at room condition¹for 24 ±2 hours.

Y5U, Y5V

DF ≤ 7.5%

3,000 MΩ minimum

SL: 1,000 MΩ minimum

Post-treatment: Capacitor is stored for 1 to 2 hours at room

condition¹.

Dielectric

Strength

No failures

¹“Room Condition” is deﬁned as follows: Temperature: 15 ~ 35°C/Humidity: 45 ~ 75%/Atmospheric Pressure: 86 ~ 106 kPa.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017

9

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Soldering and Mounting Information

Soldering:

When soldering this product to a PCB/PWB, do not exceed the solder heat resistance speciﬁcation of the capacitor.

Subjecting this product to excessive heating could reﬂow the solder joint between the lead and ceramic element and/or may

result in thermal shocks that can crack the ceramic element.

When soldering these capacitors with a soldering iron, it should be performed under the following conditions:

• Temperature of iron-tip: 400°C maximum

• Soldering iron wattage: 50 W maximum

• Soldering time: 3.5 seconds maximum

Cleaning (ultrasonic cleaning):

To perform ultrasonic cleaning, observe the following conditions:

• Rinse bath capacity: output of 20 watts per liter or less

• Rinsing time: 5 minute maximum

• Do not vibrate the PCB/PWB directly

• Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires

Construction

Detailed Cross Section

Epoꢀy Encapsulation

(0ꢁ4 mm ꢂinimum Tꢃicꢄness,

ꢅigment ꢆ ꢇlue/ꢈL 94 Vꢉ0)

Lead Attacꢃ Solder

(Sn9ꢊꢁ5/Agꢋ/Cu0ꢁ5)

Dielectric

material

(ꢇaTiꢒ_ꢋ)

Electrode

(Ag ꢌ Glass frit)

Electrode

(Ag ꢌ Glass frit)

Lead ꢑire

Lead Attacꢃ Solder

(Sn9ꢊꢁ5/Agꢋ/Cu0ꢁ5)

Steel

Cu

Core ꢂetal

Dielectric

ꢇarrier Layer

material

(ꢇaTiꢒ_ꢋ)

100ꢎ Sn

(ꢋꢉꢏ ꢐm)

ꢍinisꢃ Layer

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017 10

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Marking

These capacitors shall be stamped or laser marked with KEMET's trademark, type designation, capacitor class, rated voltage,

rated capacitance and capacitance tolerance codes. In addition, all devices are marked with the recognized approval mark

and a date/lot code for traceability. Marking will be supplied either on one side or both sides of the encapsulated capacitor

body. All marking shall be legible to allow for clear identiﬁcation of the component. Marking appears in legible contrast.

Illustrated below is an example of the marking format and content. (Two sided marking is limited to capacitors with body

diameters ≤ 8.0 mm.)

Single Sided

Rated Capacitance

(ꢆ ꢄumeric Cꢉaracters)

ꢊEꢋET ID

Type Designation

(2 Cꢉaracters)

Capacitance Tolerance Code

(1 Cꢉaracter)

VDE ꢃ EꢄEC

approꢁal marꢂs

IEC ꢅ0ꢆꢇ4ꢈ14 ꢆrd

(2005)

Capacitor Class

and Rated Voltage

ꢀL approꢁal marꢂ

Date/Lot Code

(See Taꢌle ꢍeloꢎ)

Double Sided

Front

Back

ꢋL approꢅal marꢆ

Rated Capacitance

(ꢈ ꢄumeric Cꢂaracters)

ꢀEꢁET ID

Capacitance

Tolerance Code

(1 Cꢂaracter)

Type Designation

(2 Cꢂaracters)

VDE ꢃ EꢄEC

approꢅal marꢆs

IEC ꢇ0ꢈꢉ4ꢊ14 ꢈrd

(2005)

Capacitor Class

and Rated Voltage

Date/Lot Code

(See Taꢌle ꢍeloꢎ)

Date/Lot Code Explanation

6

C

6

1234

Manufacturing

Month:

Last digit of year,

e.g.,

Manufacturing

Location Code

Last 4 digits of

lot no.

1-9 = Jan - Sept

A = October

N = November

D = December

6 = 2016

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017 11

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Packaging Quantities

Ammo Pack (Carrier Tape)

Component pitch on carrier tape²

Capacitor

Body Diameter

(mm)

Body Diameter

Code¹

Bulk Bag

(Loose)

12.7 mm

15 mm

25.4 mm

7.0

8.0

0

1

2

3

4

5

6

7

8

9.0

1,000 pieces/box

10.0

11.0

12.0

13.0

14.0

15.0

500 pieces/bag

1,000 pieces/box

500 pieces/box

¹The "Body Diameter Code" is located in the third character position of the ordering code. This code identiﬁes the maximum diameter of the capacitor

body in millimeters. For more information regarding the ordering code, see "Ordering Information" section of this document.

²For details regarding component pitch on carrier tape, see "Ammo Pack Taping Format" and "Ammo Pack Taping Speciﬁcations" sections of this

document.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017 12

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Figure 1 - Ammo Pack Taping Format

5 mm and 7.5 mm Lead Spacing:

∆S

ꢀ₂

ꢀ

D

e

ꢄd

ꢀ₁

ꢂ₂

ꢂ₀

ꢁ

ꢃ₀

∆ꢃ₁0 ∆ꢃ₂

T maꢀimum

ꢁarꢂing Side

L

ꢂ₁

ꢂ

ℓ

ꢄD₀

ꢀ₀

10 mm Lead Spacing:

∆S

ꢀ₂

ꢀ

D

t₂

t₁

e

ꢀ₁

ꢂ₂

ꢂ₀

ꢁ

ꢄd

ꢃ₀

L

ꢂ₁

ꢂ

ꢀ₀

ꢄD₀

ℓ

Table 3 – Ammo Pack Taping Speciﬁcations

Lead Spacing

5 mm

7.5 mm

10 mm

Lead Style

Item

Straight

Preformed¹

Straight

Preformed¹

Straight

Preformed¹

Symbol

Dimensions (mm)

Lead Spacing

Component Pitch

Sprocket Hole Pitch

F

P

5.0+0.8/−0.2

7.5±1.0

15.0

10.0±1.0

12.7

25.4±2

P₀

12.7±0.3

15.0±0.3

12.7±0.3

Sprocket Hole Center to

P₂

P₁

6.35±1.5

3.75±1.0

7.5±1.5

12.7±1.5

7.7±1.5

Component Center

Sprocket Hole Center to Lead

3.75±1.0

Center

Body Diameter

Component Alignment (side/side)

Carrier Tape Width

D

See "Product Ordering Codes and Ratings" section of this document.

∆S

W

0±2.0

18.0+1.0/−0.5

9.0±0.5

Sprocket Hole Position

W₁

¹Prefromed (crimped) lead conﬁgurations include vertical kink, outside kink and inside kink. See "Lead Conﬁgurations" and "Ordering Information"

sections of this document for further details.

²Also referred to as "lead length" in this document.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017 13

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Table 3 – Ammo Pack Taping Speciﬁcations cont'd

Lead Spacing

5 mm

7.5 mm

10 mm

Lead Style

Straight

Preformed¹

Straight

Preformed¹

Straight

Preformed¹

Item

Symbol

H₀

Dimensions (mm)

Height to Seating Plane²

N/A

18.0 +2.0/-0

N/A

20.0 +1.5/-1.0

18.0 +2.0/-0

N/A

18.0 +2.0/-0

N/A

(preformed leads¹)

Height to Seating Plane²

(straight leads)

H

20.0 +1.5/-1.0

Lead Protrusion

Diameter of Sprocket Hole

Lead Diameter

ℓ

D₀

φd

t₁

2.0 maximum

4.0 ±0.2

0.55 ±0.1

0.6 ±0.3

Carrier Tape Thickness

Total Thickness (Carrier Tape,

Hold-Down Tape and Lead)

t₂

1.5 maximum

∆h₁

∆h₂

L

Component Alignment (front/

back )

2.0 maximum

11.0 maximum

Cut Out Length

Hold-Down Tape Width

Hold-Down Tape Position

W₀

W₂

11.0 minimum

3.0 maximum

11.5 minimum

1.5 ±1.5

Coating Extension on Leads

(meniscus)

e

3.0 maximum for straight lead; not to exceed the bend for preformed¹lead conﬁgurations.

See "Product Ordering Codes and Ratings" section of this document.

Body Thickness

T

¹Prefromed (crimped) lead conﬁgurations include vertical kink, outside kink and inside kink. See "Lead Conﬁgurations" and "Ordering Information"

sections of this document for further details.

²Also referred to as "lead length" in this document.

Application Notes:

Storage and Operating Conditions:

The Insulating coating of these devices does not form an air and moisture tight seal. Avoid exposure to moisture and do not

use or store these devices in a corrosive atmosphere, especially where chloride gas, sulﬁde gas, acid, alkali, salt or the like

are present. Before cleaning, bonding or molding these devices, it is important to verify that your process does not affect

product quality and performance. KEMET recommends testing and evaluating the performance of a cleaned, bonded or

molded product prior to implementing and/or qualifying any of these processes. Store the capacitors where the temperature

and relative humidity do not exceed 40 degrees centigrade and 70% respectively. For optimum solderability, capacitor stock

should be used promptly, preferably within 6 months of receipt.

Working Voltage:

Application voltage (Vp-p or Vo-p) must not exceed the voltage rating of the capacitor. Irregular voltages can be generated

for a transient period of time when voltage is initially applied and/or removed from a circuit. It is important to choose a

capacitor with a voltage rating greater than or equal to these irregular voltages.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017 14

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

Operating Temperature and Self-Generating Heat:

The surface temperature of a capacitor should be kept below the upper limit of its rated operating temperature range. Be

sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a high-frequency current,

pulse current or similar current, it may self-generate heat due to dielectric loss. Temperature rise due to self-generated

heating should not exceed 20°C (while operated at an atmosphere temperature of 25°C).

Handling - Vibration and Impact:

Do not expose these devices or their leads to excessive shock or vibration during use.

FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR

PARTIAL DISPERSION WHEN THE PRODUCT IS USED.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017 15

Radial Leaded Ceramic Disc Capacitors

Safety Standard Recognized, C900, Encapsulated, AC Type, X1 400 VAC/Y2 250 VAC (Industrial Grade)

KEMET Electronics Corporation Sales Ofﬁces

For a complete list of our global sales ofﬁces, please visit www.kemet.com/sales.

Disclaimer

All product speciﬁcations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for

checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such

applications, but are not intended to constitute – and KEMET speciﬁcally disclaims – any warranty concerning suitability for a speciﬁc customer application or use.

The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no

obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component

failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards

(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or

property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other

measures may not be required.

KEMET is a registered trademark of KEMET Electronics Corporation.

C1064_X1_400 VAC_Y2_250 VAC • 8/4/2017 16

型号:	C901U222MYVDBA7317
是否无铅：	不含铅
是否Rohs认证：	符合
生命周期：	Active
IHS 制造商：	KEMET ELECTRONICS CORP
包装说明：	RADIAL LEADED
Reach Compliance Code：	compliant
ECCN代码：	EAR99
Factory Lead Time：	79 weeks
风险等级：	1.65
其他特性：	CLASS X1 AND Y2 FOR SAFETY REGULATION
电容：	0.0022 µF
电容器类型：	CERAMIC CAPACITOR
介电材料：	CERAMIC
高度：	7 mm
JESD-609代码：	e3
长度：	7 mm
安装特点：	THROUGH HOLE MOUNT
多层：	No
负容差：	20%
端子数量：	2
最高工作温度：	125 °C
最低工作温度：	-40 °C
封装形状：	DISK PACKAGE
封装形式：	Radial
包装方法：	Ammo Pack
正容差：	20%
额定（AC）电压（URac）：	400 V
参考标准：	IEC60384-14
表面贴装：	NO
温度特性代码：	Y5V
温度系数：	-80/+30% ppm/ °C
端子面层：	Tin (Sn)
端子节距：	10 mm
端子形状：	WIRE
宽度：	5 mm
Base Number Matches：	1

电子百科

产品导航

产品型号C901U222MYVDBA7317的Datasheet PDF文件预览

C901U150JZNDAAWL45相关产品

C901U150JZNDAAWL45相关文章

IC37:专业IC行业平台