CH340供应商报价哪里找芯片批发报价原理和应用中文资料-中国IC网-芯三七

当前位置：IC37首页_>C字母起始型号索引_>C字母起始型号索引第583页更新时间：2025-02-11 16:42:05

产品型号CH340的Datasheet PDF文件预览

The DataSheet of CH340 (the first)

USB to serial chip CH340

English DataSheet

Version: 1D

http://wch.cn

1. Introduction

CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to

IrDA infrared or USB convert to printer interface.

In serial interface mode, CH340 supplies common MODEM liaison signal, used to enlarge

asynchronous serial interface of computer or upgrade the common serial device to USB bus directly. More

detail about USB convert to printer interface please referring to the second manual CH340DS2.

In infrared mode, add infrared transceiver to CH340 can compose USB infrared adapter, realize SIR

infrared communication.

UART/RS232/IrDA infrared SIR

Computer

or other

CH340

convert

chip

USB

USB host

parallel printer to USB printer

2. Features

● Full speed USB device interface, conforms to USB Specification Version 2.0, only needs crystal and

capacitance external.

● Emulate standard serial interface, used to upgrade the former peripheral device, or add excess serial

interface through USB.

● Totally compatible with serial application program in computer endpoint Windows operation system.

● Hardware full duplex serial interface, set transceiver buffer, supports communication baud rate varies

from 50bps to 2Mbps.

● Supports common MODEM liaison signal RTS, DTR, DCD, RI, DSR and CTS.

● Through adding level converter equipment to supply RS232, RS485, RS422 and other interface.

● Supports IrDA criterion SIR infrared communication, supports baud rate varies from 2400bps to

115200bps.

● For it is through USB converts to serial interface, only compatible with application layer not totally.

● Software compatible with CH341, using drive of CH341 directly.

● Support 5V and 3.3V source voltage.

● Supply SSOP-20 package without lead, compatible with RoHS.

The DataSheet of CH340 (the first)

3. Package

Package shape Width of plastic

Pitch of Pin

Instruction of package

Ordering type

CH340T

SSOP-20

5.30mm 209mil 0.65mm 25mil Shrink small outline package of 20-pin

CH340R

4. Pins

Pin Description(description in bracket is only about

CH340R)

Pin No.

Pin Name

Pin Type

Positive power input port, requires an external 0.1uF

power decoupling capacitance

VCC

GND

POWER

Public ground, ground connection for USB

connects of VCC to input outside power while 3.3V,

connects of 0.01uF decoupling capacitance outside

while 5V

POWER

Input of crystal oscillator, attachment of crystal and

crystal oscillator capacitance outside

Opposite output of crystal oscillator, attachment of

crystal and crystal oscillator capacitance outside

Directly connect to D+ data wire of USB bus, set up

pull-up resistor internal

OUT

UD+

UD-

USB signal

Directly connect to D- data wire of USB bus

Forbid USB device suspending, active with low, set up

pull-up resistor internal

NOS#

TXD

RXD

OUT

Serial data output(opposite phasic output of CH340R)

Serial data input, set up controlled pull-up and

pull-down resistor

MODEM liaison input signal, clear sending, active with

low(high)

CTS#

DSR#

MODEM liaison input signal, data equipment is ready,

active with low(high)

MODEM liaison input signal, oscillate ring to prompt,

active with low(high)

RI#

The DataSheet of CH340 (the first)

MODEM liaison input signal, carrier wave detection,

active with low(high)

DCD#

OUT

MODEM liaison output signal, data endpoint is ready,

active with low(high)

DTR#

RTS#

OUT

MODEM liaison output signal, request to send, active

with low(high)

CH340T:negative phasic clock output

(CH340R:USB configuration is finished state output,

active with low)

ACT#

OUT

Assistant RS232 enable, active with high, set up

pull-down resistor internal

R232

NC.

CH340T: unconnected, must be suspended

CH340R:Serial interface mode set input, set up pull-up

resistor internal, low level is SIR infrared serial

interface, high level is common serial interface

IR#

CKO.

OUT(NC.)

CH340T: clock output

CH340R:unconnected, must be suspend

5. Function description

CH340 chip set up USB pull-up resistor internal, UD+ and UD- pins must be connected to USB bus

directly.

CH340 chip set up power up reset circuit internal.

When CH340 chip is working normally, the outside must supply 12MHz clock signal to XI pin. In

generally, clock signal is generated by inverter in CH340 through oscillating of crystal keeping frequency. A

crystal of 12MHz between XI and XO, XI and XO connect a high frequency oscillator capacitance to ground

respectively can compose the peripheral circuit.

CH340 chip supports 5V and 3.3V power voltage. When using 5V source power, the VCC input 5V

power and the pin of V3 must connect with 4700pF or 0.01uF decoupling capacitance. When using 3.3V

power voltage, connects V3 with VCC, and input 3.3V power voltage. And the other circuit voltage which is

connected with CH340 is no more than 3.3V.

CH340 automatically supports USB device suspending to save power consume. NOS# is low–level can

forbid USB device suspending.

In asynchronous serial interface mode, CH340 chip contains these pins: data transfer pin, MODEM

liaison signal pin and assistant pin.

Data transfer pin contains: TXD pin and RXD pin. When serial interface is idle, RXD must be

high-level. If R232 is high-level, use assistant RS232 function, then RXD pin automatically inserts a inverter

internal, and low-level is in default. When serial interface output is free, the TXD in CH340H and CH340T

is high level, TXD in CH340R is low-level.

MODEM liaison signal pin contains: CTS#, DSR#, RI#, DCD# and RTS#. All these MODEM liaison

signal are controlled by computer application program and application program defines function.

Assistant pin contains: IR#, R232, CKOH, CKOL and ACT#. When IR# is low-level, starts infrared

serial interface mode. R232 is used to control assistant RS232 function. When R232 is high-level, RXD pin

automatically insert a inverter internal, and output opposite phase clock from CKOH and CKOL. ACT# is

USB device configuration finished state output (such as USB infrared adapter is ready) when R232 is

low-level. IR# and R232 only be detected once a time after power reset.

CH340 set separate transceiver buffer internal and supports simplex, semiduplex and full duplex

asynchronous serial communication. Serial data contains one low-level start bit , eight or nine data bit and

The DataSheet of CH340 (the first)

one high-level stop bit. Supporting odd check/even check/flag check/blank check. CH340 supports common

baud rate: 50,75,100,110,134.5,150,300,600,900,1200,1800,2400,3600,4800,9600,14400,19200,28800,

33600,38400, 56000,57600,76800,115200,128000,153600,230400,460800,921600,1500000,2000000 and so

on. The baud rate error of serial transfer signal is less than 0.3%, and permission baud rate error of serial

receive signal is not less than 0.2%.

In the WINDOWS operation system of computer endpoint, drive program of CH340 can communicate

standard serial interface. So the mostly original serial interface application program is totally compatible,

and without any modify.

CH340 can be used to upgrade the former serial interface peripheral equipment, or add extra serial

interface for computer via USB bus. Supply RS232, RS485, RS422 and other interface via adding level

change device.

Only add infrared transceiver, CH340 can add SIR infrared adapter for computer via USB bus, realize

infrared communication between computer and peripheral equipment which is according to IrDA criterion.

6. Parameter

6.1. Absolute maximum rating (Stresses above those listed can cause permanent damage to the device.

Exposure to maximum rated conditions can affect device operation and reliability.)

Name

Parameter note

Ambient operating temperature

Storage temperature

Min.

-40

Max.

Units

℃

-55

125

℃

VCC Voltage source (VCC connects to power, GND to ground)

VIO The voltage of input or output pin

-0.5

6.5

VCC+0.5

6.2. Electrical parameter (test conditions: TA=25℃, VCC=5V, exclude pin connection of USB bus)

(The every current parameter must multiply the coefficient of 40% when the power is 3.3V)

Name

VCC

ICC

Parameter note

Min.

4.5

Typical

Max.

5.3

Units

V3 doesn’t connect to VCC

V3 connect to VCC

Source voltage

3.3

3.8

Total source current when working

VCC=5V

VCC=3.3V

0.15

0.05

0.2

Total source current when

USB suspending

ISLP

0.08

0.7

VIL

VIH

VOL

Input Voltage LOW

Input Voltage HIGH

-0.5

2.0

VCC+0.5

0.5

Output Voltage LOW (draw 4mA current)

Output Voltage HIGH (output 3mA current)

(Output 100uA current during chip reset)

Input current with pull-up resistor internal

Input current with pull-down resistor internal

Restrict voltage when power-up reset

VOH

VCC-0.5

IUP

IDN

150

-150

2.6

300

-300

2.9

-50

2.3

6.3. sequence parameter (test conditions: TA=25℃,VCC=5V)

Name

FCLK

TPR

Parameter note

Min.

Typical

12.00

Max.

12.02

Units

MHz

Frequency of input clock in XI

Reset time of power-up

11.98

The DataSheet of CH340 (the first)

7. Application

7.1. USB convert 9-wire serial interface (the following image)

The following image is using CH340T to realize USB convert RS232 serial interface. CH340 supplies

common serial interface signal and MODEM signal, changes TTL serial interface to RS232 serial interface

through level convert circuit U8. Endpoint P11 is DB9 needle, the pin and its function is the same as

common nine needles serial interface of computer. The similar with U8 is MAX213/ADM213/SP213 etc.

Take the U8 and C46/C47/C48.C49/C40 out when only realize USB convert to TTL serial interface.

The signal wire in the image can only connect RXD、TXD and public ground, the other signal wire can

suspend when not use.

P2 is USB endpoint. USB bus contains a pair of 5V power wire and a pair of data signal wire. Usually,

the +5V power wire is red, the black is ground. D+ signal wire is green and the D- signal wire is white. The

max source current of USB bus is up to 500mA. In generally, CH340 and low power exhaust USB product

can directly use the 5V power supplied by USB bus. If the USB product supplies stock power by other

manner, CH340 must use this stock power. If the USB bus power and stock power are necessary at the same

time, connect a 1Ω resistor between USB bus 5V power wire and USB product 5V stock power, and connect

the two power wires’ ground wire directly.

The capacitance of C8 varies from 4700pF to 0.02uF, used to internal power node decoupling of CH340.

The C9 is 0.1uF, used to external power decoupling. Crystal X2、capacitance C6 and C7 are used to clock

surge circuit. The X2 is 12MHz quartz crystal, C6 and C7 are monolithic or high frequency stoneware

capacitance with 22pF. If X2 is ceramic with low cost, C6 and C7 must use the recommend value of crystal

manufacturer and generally is 47pF.

When designing the PCB, pay much attention to some notes: decoupling capacitance C8 and C9 must

keep near to connection pin of CH340; makes sure D+ and D- are parallel and supply ground net or pour

copper beside them to decrease the disturbance from outside signal; the relevant signal between XI and XO

must be kept as short as possible. In order to lessen the high frequency disturbance, play ground net or pour

copper to the relative equipment.

7.2. USB convert RS232 serial interface (the following image)

The image is USB converts to basic and common three wires RS232 serial interface, and U5 is

MAX232/ICL232/SP232 etc.

The DataSheet of CH340 (the first)

7.3. USB convert RS232 serial interface, handing edition (the following image)

The following image also is USB convert three RS232 serial interface, the function of this circuit is the

same with 7.2. except the range of output RS232 is low. R232 in CH340 is high-level starts assistant RS232

function, only add diode、audion、resistor and capacitance can replace the special level convert circuit U5 in

7.2.. So the hardware cost is lower.

7.4. USB infrared adapter (the following image)

The following USB infrared adapter image is composed with USB convert IrDA infrared chip CH340R

and infrared transceiver U14 (ZHX1810/HSDL3000 etc). The resistor R13 is used to weaken influence of

large current when infrared transferring. R13 can be ignored when the request is low. The limited current

resistor R14 can be adjusted according recommended value supplied by the infrared transceiver U14’s

manufacture.

Consulting the following image, if selecting CH340H or CH340T chip, only to insert a inverter in TXD

signal wire can realize the similar infrared function of the upper image.(the converter circuit in the following

is composed of audion T12 and two resistors R10 and R11).

CH340相关文章

配单直通车

深圳市中利达电子科技有限公司服务专线: 0755-13686833545 在线联系:

QQ：1902134819 复制

QQ：2881689472 复制

柒号芯城电子商务（深圳）有限公司服务专线: 18922803401 在线联系:

QQ：2881677436 复制

QQ：2881620402 复制

首天国际（深圳）科技有限公司服务专线: 0755-82807802/82807803 在线联系:

QQ：528164397 复制

QQ：1318502189 复制

深圳市芯福林电子有限公司服务专线: 13418564337 在线联系:

QQ：2881495808 复制

QQ：308365177 复制

北京元坤伟业科技有限公司服务专线: 010-62104931621064316210489162104791 在线联系:

QQ：857273081 复制

QQ：1594462451 复制

电子百科

产品导航

产品型号CH340的Datasheet PDF文件预览

CH340相关产品..

CH340相关文章

IC37:专业IC行业平台