REVISION CR
CLT-1XX-02-XX-D-XX
DO NOT
SCALE FROM
THIS PRINT
OPTION
No OF POS. PER ROW
-P: PICK & PLACE PAD
-02 THRU -50
AVAILABLE ON POSITIONS
04 THRU 50 ONLY
LEAD STYLE
-02: SURFACE MOUNT
(SEE TABLE 1)
(SEE FIG. 2, SHT 2. USE LMP-03)
-TR: TAPE AND REEL PACKAGING (SEE NOTE 13)
(02 THRU 36 POS ONLY)
FIG 6
(SEE NOTE 11)
-BE OPTION
(SAME AS FIG 1 EXCEPT INSULATOR)
-FR: FULL REEL QTY. TAPE & REEL (SEE NOTE 14)
(02 THRU 36 POS ONLY)
PLATING SPECIFICATION
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-BE: BOTTOM ENTRY
(SEE FIG. 6, USE CLT-XX-DBE-XX)
-A: ALIGNMENT PIN (MOLDED OR STAKED)
(SEE FIGS. 3 & 4, SHT 2)
C
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(No OF POS x .0787[2.00]) .008[0.20]
(CUT TO POSITION) SEE NOTE 4, 9, 10
(No OF POS x .07874[2.00]) - .07874[2.00] REF
SEE TABLE 1
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(STAKED MIN 5 POS)
.1575 4.00 REF
(MOLDED MIN 3 POS)
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-K: POLYIMIDE FILM PAD
"A"
(AVAILABLE ON POS. 4 THRU 50 ONLY)
(SEE FIG 5, SHT 2)
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(USE K-DOT-.197-.344-.005)
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
C
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
.07874 2.00 REF
(SEE NOTE 10)
L
ROW SPEC.
-D DOUBLE ROW
(USE CLT-XX-D EXCEPT
FOR -BE OPTION)
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
"A"
'C'
2.5 MAX SWAY
.024 0.61 SQ REF
BURR SIDE (SEE NOTE 8)
(ANY DIRECTION)
.0200 0.51 x .0050[.127] REF
C
L
4°
.0835 2.12
REF
.090±.002 2.29±0.05
(MEASURE AT BEND)
C
SEE NOTE 2
CLT-XX-D-XX
SEE NOTE 9
.0130±.0020 0.330±0.051
C
3°
C
FIG 1
.203±.010 5.150±0.254
(SEE NOTE 6)
SECTION "A"-"A"
SCALE 4 : 1
DETAIL 'C'
SCALE 16 : 1
SEE NOTE 12
'B'
NOTES:
1.
C
.0868±.004 2.204±0.102
C
C
REPRESENTS A CRITICAL DIMENSION.
.0032 0.082
.295±.008 7.494±0.203
2. COPLANARITY TO BE .004 FOR POSITIONS 2-25,
.006 FOR POSITIONS 26-34, AND .008 FOR 35-50.
3. MINIMUM PUSHOUT FORCE: .4 LB.
4. WILL LOSE A POSITION FOR EVERY CUT MADE ON A SOCKET STRIP.
5. ALL OPTIONS:PACKAGE POSITIONS -04 THRU -50 IN
PT-CLX002-D TUBE AS SHOWN IN VIEWS, WITH TWO TP-12 PLUGS
PER TUBE. LAYER PACKAGE POSITIONS -02 & -03.
6. SHEAR TAILS TO DIMENSION SHOWN.
7. PARTS TO BE SYMMETRICAL ABOUT
8. MAXIMUM BURR: .005[0.13]
9. MAXIMUM CUT FLASH: .010[0.25] X .020[0.51] (HEIGHT X WIDTH)
WITH NO FLASH ALLOWED IN HOLES OR EXTENDING BELOW LEADS.
10. MINIMUM STANDARD BODY ENDWALL AFTER CUTTING: .0215[0.546]
11. -BE BODY ENDWALL AFTER CUTTING: .0169 .003 [0.429 0.08]
12. C-114-02 CAN BE USED FOR C-114-22. C-114-22-XX IS FOR
AUTOMATED ASSEMBLY PROCESSES ONLY.
13. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE
PACKAGED ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY
STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM.
14. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL, BASED
ON OPTIONS SELECTED.
DETAIL 'B'
IN-PROCESS 2
SCALE 16 : 1
IN-PROCESS 1
(HANDFILL ONLY)
(HANDFILL ONLY)
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
C
L
88°
90°
C
DECIMALS
ANGLES
2
.XX: .01 [0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
.010 0.25
.012 0.30
C
MATERIAL:
2MM LOW PROFILE SOCKET STRIP
INSULATOR: LCP, UL 94 VO, COLOR BLACK
CONTACT: PHOS BRONZE
DWG. NO.
IN-PROCESS
SCALE 8:1
CLT-1XX-02-XX-D-XX
(AUTOMATED ONLY)
BY:
BRATCHER 10/03/1994 SHEET 1 OF 2
F:\DWG\MISC\MKTG\CLT-1XX-02-XX-D-XX-MKT.SLDDRW
QQ：528164397 复制
