欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
更多
  • D4SL-N4TFA图
  • 深圳市科雨电子有限公司

     该会员已使用本站9年以上
  • D4SL-N4TFA
  • 数量12 
  • 厂家OMRON 
  • 封装开关元件 
  • 批号21+ 
  • ★体验愉快问购元件!!就找我吧!单价:2875元
  • QQ:97671956QQ:97671956 复制
  • 171-4729-1886(微信同号) QQ:97671956
  • D4SL-N4TFA-N图
  • 深圳市科雨电子有限公司

     该会员已使用本站9年以上
  • D4SL-N4TFA-N
  • 数量96 
  • 厂家OMRON 
  • 封装开关元件 
  • 批号21+ 
  • ★体验愉快问购元件!!就找我吧!单价:2595元
  • QQ:97671956QQ:97671956 复制
  • 171-4729-1886(微信同号) QQ:97671956

产品型号D4SL-N4TFA的Datasheet PDF文件预览

Guard Lock Safety-door Switch/D4SL-N-mounting Slide Key  
D4SL-N  
World's smallest Class 6-contact Guard Lock  
Safety-door Switch  
/
D4SL-NSK10-LK  
@
<Guard Lock Safety-door Switch D4SL-N>  
• Wiring time is reduced with two types of wiring  
Guard Lock Safety-door Switch  
methods capable of one-touch attachment and  
removal.  
• A wide variety of built-in switches can be used for  
various devices.  
(4-, 5-, and 6-contact models are available)  
• Key holding force of 1,300 N.  
• It is possible to change the key insertion point  
without detaching the head.  
• Drive solenoids directly from the Controller.  
Slide Key  
Terminal  
<Slide Key D4SL-NSK10-LK@>  
Connector Type  
Block Type  
• Lockout Key to prevent workers from becoming  
trapped inside the hazardous area.  
• The vertical D4SL Guard Lock Safety-door Switch  
can be easily mounted on 40 × 40 mm aluminum  
frames.  
• The plastic material makes the Slide Key suitable  
for lightweight doors.  
Be sure to read the “Safety Precautions”  
on page 21.  
1
D4SL-N / D4SL-NSK10-LK@  
Model Number Structure  
Model Number Legend  
Switch (Standard type)  
(1) (2) (3) (4)  
(5) (6) (7)  
D4SL-N@@@@-@@@  
(1) Conduit Size  
(4) Door Lock and Release  
Contact Model  
Conduit Size  
Contact Model  
4-contact Model  
Door Lock and Release  
4-contact Model  
2: G1/2  
3: 1/2-14NPT *1  
4: M20  
A: Mechanical lock/24VDC solenoid release  
G: 24VDC solenoid lock/mechanical release  
Common  
Common  
5-contact Model  
6-contact Model  
5-contact Model  
6-contact Model  
(2) Built-in Switch  
(5) Indicator  
Contact Model  
Built-in Switch  
Contact Model  
Indicator  
Door monitor and Lock monitor are connected in series  
internally.  
4-contact Model  
: None  
5-contact Model  
6-contact Model  
Common  
D: 24VDC (orange LED indicator)  
A: 1NC/1NO + 1NC/1NO  
B: 1NC/1NO + 2NC  
C: 2NC + 1NC/1NO  
(6) Release Key Type  
D: 2NC + 2NC  
4-contact Model  
Door monitor and Lock monitor are NOT connected in  
series internally.  
Contact Model  
Release Key Type  
4-contact Model  
: Standard release key (metal)  
S: 1NC/1NO + 1NC/1NO  
T: 1NC/1NO + 2NC  
: Standard release key (metal)  
4: Special release key (resin)  
(Note:Release keys are provided.)  
5-contact Model  
Common  
U: 2NC + 1NC/1NO  
6-contact Model  
V: 2NC + 2NC  
E: 2NC/1NO + 1NC/1NO  
F: 2NC/1NO + 2NC  
G: 3NC + 1NC/1NO  
H: 3NC + 2NC  
PN:: 22NNCC//11NNOO ++ 32NNCC/1NO  
Q: 3NC + 2NC/1NO  
R: 3NC + 3NC  
(7) Connection Method  
5-contact Model  
6-contact Model  
Contact Model  
Connection Method  
4-contact Model  
5-contact Model  
6-contact Model  
: Terminal block  
Common  
N: Connector *2  
(3) Head Material  
Contact Model  
4-contact Model  
Head Material  
F: Resin  
5-contact Model  
6-contact Model  
F: Resin  
D: Metal  
Common  
*1. M20, includes M20-to-1/2-14NPT conversion adapter.  
*2. Connector cables are not included with the connector type and are to be purchased separately.  
Operation key  
(1)  
(2)  
D4SL-NK@@  
(1) Operation Key Type  
(2) Key Type  
: No cushion rubber  
G: Cushion rubber  
1: Horizontal mounting  
2: Vertical mounting  
3: Adjustable mounting (horizontal)  
S: No cushion rubber, short type  
2
D4SL-N / D4SL-NSK10-LK@  
Ordering Information  
List of Models  
Contact configuration  
(door open/closed detection switch  
and lock monitor switch contacts)  
Conduit  
size  
(See Note.)  
Release  
Key Type  
Wiring  
method  
Solenoid voltage/  
Indicator  
Lock and  
release type  
Model  
G1/2  
1/2-14NPT  
M20  
D4SL-N2@FA-DN  
D4SL-N3@FA-DN  
D4SL-N4@FA-DN  
D4SL-N2@FA-DN  
D4SL-N3@FA-DN  
D4SL-N4@FA-DN  
D4SL-N2@FA-N  
D4SL-N3@FA-N  
D4SL-N4@FA-N  
D4SL-N2@FA-D  
D4SL-N3@FA-D  
D4SL-N4@FA-D  
D4SL-N2@FA-D  
D4SL-N3@FA-D  
D4SL-N4@FA-D  
D4SL-N2@FA  
6-contact Model  
Insert the built-in switch (N, P, Q or R)  
into the blank @.  
24VDC  
(Orange)  
G1/2  
5-contact Model  
Insert the built-in switch (E, F, G or H)  
into the blank @.  
Connector  
1/2-14NPT  
M20  
G1/2  
4-contact Model  
Insert the built-in switch (A, B, C, D, S,  
T, U or V) into the blank @.  
24VDC  
(without indicator)  
1/2-14NPT  
M20  
Mechanical lock  
Solenoid release  
G1/2  
6-contact Model  
Insert the built-in switch (N, P, Q or R)  
into the blank @.  
1/2-14NPT  
M20  
24VDC  
(Orange)  
G1/2  
5-contact Model  
Insert the built-in switch (E, F, G or H)  
into the blank @.  
Terminal  
block  
1/2-14NPT  
M20  
G1/2  
4-contact Model  
Insert the built-in switch (A, B, C, D, S,  
T, U or V) into the blank @.  
Standard  
(metal)  
24VDC  
(without indicator)  
1/2-14NPT  
M20  
D4SL-N3@FA  
D4SL-N4@FA  
G1/2  
D4SL-N2@FG-DN  
D4SL-N3@FG-DN  
D4SL-N4@FG-DN  
D4SL-N2@FG-DN  
D4SL-N3@FG-DN  
D4SL-N4@FG-DN  
D4SL-N2@FG-N  
D4SL-N3@FG-N  
D4SL-N4@FG-N  
D4SL-N2@FG-D  
D4SL-N3@FG-D  
D4SL-N4@FG-D  
D4SL-N2@FG-D  
D4SL-N3@FG-D  
D4SL-N4@FG-D  
D4SL-N2@FG  
6-contact Model  
Insert the built-in switch (N, P, Q or R)  
into the blank @.  
1/2-14NPT  
M20  
24VDC  
(Orange)  
G1/2  
5-contact Model  
Insert the built-in switch (E, F, G or H)  
into the blank @.  
Connector  
1/2-14NPT  
M20  
G1/2  
4-contact Model  
Insert the built-in switch (A, B, C, D, S,  
T, U or V) into the blank @.  
24VDC  
1/2-14NPT  
M20  
(without indicator)  
Solenoid lock  
Mechanical  
release  
G1/2  
6-contact Model  
Insert the built-in switch (N, P, Q or R)  
into the blank @.  
1/2-14NPT  
M20  
24VDC  
(Orange)  
G1/2  
5-contact Model  
Insert the built-in switch (E, F, G or H)  
into the blank @.  
Terminal  
block  
1/2-14NPT  
M20  
G1/2  
4-contact Model  
24VDC  
(without indicator)  
Insert the built-in switch (A, B, C, D, S,  
T, U or V) into the blank @.  
1/2-14NPT  
M20  
D4SL-N3@FG  
D4SL-N4@FG  
Note: The recommended models for equipment and machinery being exported to Europe are those with an M20 conduit sizes, and for North  
America, the recommended models are those with a 1/2-14NPT conduit sizes.  
3
D4SL-N / D4SL-NSK10-LK@  
Contact configuration  
(door open/closed detection switch  
and lock monitor switch contacts)  
Release  
Key Type  
Wiring  
method  
Solenoid voltage/  
Indicator  
Lock and  
release type  
Conduit size  
(See Note.)  
Model  
G1/2  
1/2-14NPT  
M20  
D4SL-N2@FA-D4N  
D4SL-N3@FA-D4N  
D4SL-N4@FA-D4N  
D4SL-N2@FA-D4N  
D4SL-N3@FA-D4N  
D4SL-N4@FA-D4N  
D4SL-N2@FA-D4  
D4SL-N3@FA-D4  
D4SL-N4@FA-D4  
D4SL-N2@FA-D4  
D4SL-N3@FA-D4  
D4SL-N4@FA-D4  
D4SL-N2@FG-D4N  
D4SL-N3@FG-D4N  
D4SL-N4@FG-D4N  
D4SL-N2@FG-D4N  
D4SL-N3@FG-D4N  
D4SL-N4@FG-D4N  
D4SL-N2@FG-D4  
D4SL-N3@FG-D4  
D4SL-N4@FG-D4  
D4SL-N2@FG-D4  
D4SL-N3@FG-D4  
D4SL-N4@FG-D4  
6-contact Model  
Insert the built-in switch (N, P, Q or R)  
into the blank @.  
Connector  
G1/2  
5-contact Model  
Insert the built-in switch (E, F, G or H)  
into the blank @.  
1/2-14NPT  
M20  
Mechanical lock  
Solenoid release  
G1/2  
6-contact Model  
Insert the built-in switch (N, P, Q or R)  
into the blank @.  
1/2-14NPT  
M20  
Terminal  
block  
G1/2  
5-contact Model  
Insert the built-in switch (E, F, G or H)  
into the blank @.  
Special  
(resin)  
1/2-14NPT  
M20  
24VDC  
(Orange)  
G1/2  
6-contact Model  
Insert the built-in switch (N, P, Q or R)  
into the blank @.  
1/2-14NPT  
M20  
Connector  
G1/2  
5-contact Model  
Insert the built-in switch (E, F, G or H)  
into the blank @.  
1/2-14NPT  
M20  
Solenoid lock  
Mechanical  
release  
G1/2  
6-contact Model  
Insert the built-in switch (N, P, Q or R)  
into the blank @.  
1/2-14NPT  
M20  
Terminal  
block  
G1/2  
5-contact Model  
Insert the built-in switch (E, F, G or H)  
into the blank @.  
1/2-14NPT  
M20  
Note: The recommended models for equipment and machinery being exported to Europe are those with an M20 conduit sizes, and for North  
America, the recommended models are those with a 1/2-14NPT conduit sizes.  
4
D4SL-N / D4SL-NSK10-LK@  
Operation Keys  
Type  
Model  
Horizontal mounting  
D4SL-NK1  
Horizontal mounting  
(Short)  
D4SL-NK1S  
D4SL-NK1G  
Horizontal mounting  
(Cushion rubber)  
Vertical mounting  
D4SL-NK2  
Vertical mounting  
(Cushion rubber)  
D4SL-NK2G  
D4SL-NK3  
Adjustable  
(Horizontal)  
Connector Cables  
Cable length  
Model  
D4SL-CN1  
D4SL-CN3  
D4SL-CN5  
1 m  
3 m  
5 m  
5
D4SL-N / D4SL-NSK10-LK@  
Slide Key  
Applicable  
Door Switch  
Type  
Specifications  
Contents  
Model  
Slide Key: 1 (not yet mounted)  
D4SL-N mounting plate: 1  
Door Switch special mounting screws: 3  
D4SL-NK1 (operation key): 1  
D4SL-NK1 special mounting screws: 2  
Lockout keys: 2  
Weight: Approx. 0.6 kg  
Mechanical durability:  
20,000 operations min.  
D4SL-NSK10-LK  
D4SL-N  
Lockout key strap: 1  
Caution labels (stickers): 2 sheets  
(English and Japanese)  
Weight: Approx. 0.1 kg  
Inner Lever: 1  
D4SL-SK10H *  
---  
Slide Key: 1 (not yet mounted)  
Inner Lever: 1  
D4SL-N mounting plate: 1  
Door Switch special mounting screws: 3  
D4SL-NK1 (operation key): 1  
Weight: Approx. 0.7 kg  
Mechanical durability:  
D4SL-NSK10-LKH  
D4SL-N  
20,000 operations min. D4SL-NK1 special mounting screws: 2  
Lockout keys: 2  
Lockout key strap: 1  
Caution labels (stickers): 2 sheets  
(English and Japanese)  
Note: 1. The Door Switch is not included. Select the Door Switch depending on the necessary number of contacts and the conduit size.  
The contents are provided as a total set, individual contents cannot be ordered separately.  
2. Perform risk assessment for the equipment in question, configure relay units and other safety circuits, and use properly.  
* The inner lever for D4GL-SK10/D4SL-NSK10 that can not be used for other products and applications.  
Applicable Door Switches  
D4SL-NSK10-LK  
+
+
=
=
D4SL-NSK10-LK  
D4SL-N  
D4SL-NSK10-LKH  
D4SL-NSK10-LKH  
D4SL-N  
6
D4SL-N / D4SL-NSK10-LK@  
Features  
The lockout key prevents workers from becoming trapped without using a padlock.  
Note: Using LEDs of D4SL-N enables confirming whether the door is open or closed and locked or unlocked.  
Close door  
Locked (power not supplied to  
solenoid) The slide handle is closed.  
The handle-shaped fixture makes  
it easy to use the Door Switch.  
CAUTION  
Guard Lock Safety-door  
Switch will not be unlocked  
with Lockout Key.  
Lockout key  
Lockout Key may be damaged  
by operating Lockout Key  
when the door is closed.  
Always carry lockout key  
when entering the Hazardous  
area.  
No. 7467139-3A  
Close door  
Unlocked (power supplied to solenoid)  
The slide handle is closed.  
Attach the supplied  
caution labels for display.  
Left door  
Door Opening to the Left.  
Lockout Key  
Do not turn the key as in the figure above if the  
slide handle is closed.  
The slide handle can be pulled.  
Open door  
Open door  
Open door  
The slide handle is open.  
The slide handle is open.  
The slide handle is open.  
The slide handle  
does not move.  
The slide handle is secured at the position  
shown in the figure.  
A worker holding the lockout key will not be  
trapped locked inside the hazardous area by  
another person.  
If the lockout key is not mounted, the  
slide handle will not move and the  
door will not close.  
When the slide handle is open, the  
lockout key can be pulled regardless of  
whether power is being supplied to the  
solenoid or not.  
7
D4SL-N / D4SL-NSK10-LK@  
Structure and Nomenclature  
Structure  
D4SL-N@@@@-D@N Connector Type  
D4SL-@@@@-D@ Terminal Block Type  
Two operation key holes  
Two operation key holes  
The switch has  
a release key  
on the back of  
the switch as well.  
from four directions.  
The switch has  
a release key  
on the back of  
Can be mounted  
Can be mounted  
the switch as well.  
from four directions.  
The switch has an  
indicator on the back  
of the switch as well.  
The switch has an  
indicator on the back  
of the switch as well.  
Connector/Terminal  
Terminal Arrengement  
for D4SL-N@N@@-D@  
9
E1 (+)  
10 E2 ()  
1
3
5
12  
22  
11  
21  
33  
41  
51  
2
4
42  
52  
64  
<LED>  
ORANGE  
1
2
3
4
5
6
10  
8
34  
6
63  
7
Notched side is No. 1  
1
3
5
7
9
2
4
6
8
10  
Note: Numbers inside the boxes are terminal  
numbers printed on the product.  
8
D4SL-N / D4SL-NSK10-LK@  
Operating Cycle Examples for Standard Models  
D4SL-N@@@A-@ (Mechanical Lock Models)  
Door condition  
Turning the special  
Condition 1  
Condition 2  
Condition 3  
release key  
Return to  
condition 1  
Door open.  
The door will lock  
when the door closes.  
Door closed.  
The door is locked.  
Door closed.  
The door can be  
opened.  
Door closed.  
No power is supplied  
to the solenoid.  
The door is unlocked  
manually.  
Terminal No. and  
Contact No.  
Function  
9
10  
E1- E2  
Solenoid ON  
2
4
1
3
42-  
52-  
11(NC)  
21(NC)  
Door open/closed detection  
and lock monitor contacts  
3
5
4
6
21-  
31-  
22 (NC)  
32 (NC)  
Door open/closed detection  
contact  
Door open/closed detection  
contact  
5
6
33-  
34 (NO)  
1
7
2
41-  
61-  
42 (NC)  
62 (NC)  
Lock monitor contact  
Lock monitor contact  
8
7
8
63-  
64 (NO)  
D4SL-N@@@G-@ (Solenoid Lock Models)  
Door condition Even when the door  
is closed, it does not  
lock until power is  
supplied to the  
solenoid.  
Door closed.  
The door can be  
opened.  
Door closed.  
The door is locked.  
Terminal No. and  
Contact No.  
Function  
9
10  
E1- E2  
Solenoid ON  
2
4
1
3
42-  
52-  
11(NC)  
21(NC)  
Door open/closed detection  
and lock monitor contacts  
3
5
4
6
21-  
31-  
22 (NC)  
32 (NC)  
Door open/closed detection  
contact  
Door open/closed detection  
contact  
5
6
33-  
34 (NO)  
The shaded areas indicate  
the contact is closed and  
power is supplied to the  
solenoid.  
1
7
2
41-  
61-  
42 (NC)  
62 (NC)  
Lock monitor contact  
Lock monitor contact  
8
7
8
63-  
64 (NO)  
Door open/closed detection and lock monitor contacts: Can be used in safety circuits because of the direct opening mechanisms.  
Door open/closed detection contact: Can be used to confirm whether the key is inserted and to monitor the open/closed status of a door.  
Lock monitor contact: Can be used to confirm whether power is supplied to the solenoid and to monitor whether or not a door can be opened or closed.  
Note: 1. The door open/closed detection and lock monitor contact configuration depends on the model.  
2. If a current is detected in the solenoid lock model (built-in switches; N, P, Q, R), before the door is closed, the door will remain unlocked.  
Be sure to supply power to the solenoid after the door is closed.  
9
D4SL-N / D4SL-NSK10-LK@  
Specifications  
Standards and EC Directives  
Conforms to the following EC Directives:  
Machinery Directive  
Low Voltage Directive  
EMC Directive  
EN1088  
EN60204-1  
GS-ET-19  
Certified Standards  
Certification body  
TÜV SÜD  
Standard  
File No.  
EN60947-5-1(certified direct opening) Consult your OMRON representative for details.  
UL *1  
UL508, CSA C22.2 No.14  
GB14048.5  
E76675  
CQC (CCC)  
KOSHA *2  
2012010305582059  
EN60947-5-1  
Consult your OMRON representative for details.  
*1. Certification has been obtained for UL CSA C22.2 No. 14.  
*2. Only certain models have been certified.  
Certified Standard Ratings  
TÜV (EN60947-5-1) CCC (GB14048.5)  
Utilization category  
AC-15  
DC-13  
0.22 A  
125 V  
1.5 A*1  
1 A *2  
Rated operating current (Ie)  
Rated operating current (Ue)  
120 V  
Note: Use a 4 A fuse that conforms to IEC60127 as a short-circuit protection device. This fuse is not included with the switch.  
*1. 11-42, 21-52, 21-22  
*2. Other terminals  
UL/CSA (UL508, CSA C22.2 No.14)  
C150  
Current (A)  
Volt-amperes (VA)  
Rated voltage  
Carry current  
Make  
Break  
Make  
Break  
120 VAC  
2.5 A  
15  
1.5  
1,800  
180  
R150  
Current (A)  
Volt-amperes (VA)  
Rated voltage  
Carry current  
Make  
Break  
Make  
Break  
125 VDC  
1.0 A  
0.22  
0.22  
28  
28  
Solenoid Coil Characteristics  
Item  
24 VDC  
+10%  
15%  
Rated operating voltage (100% ED) 24 VDC  
Power ON:  
6-contact type Approx. 6.4 W at 0.26 A  
4-contact/5-contact type Approx. 4.8 W at 0.2 A  
Constant: Approx. 2.6 W (average) at 0.2 A (max.)  
Current consumption *  
Insulation  
Class E (to 120°C)  
* A starting current is applied to the solenoid for Approx. 10 seconds.  
After this, the internal circuit switches to a constant current.  
Indicator  
Item  
LED type  
Rated voltage  
Current consumption  
Color (LED)  
24 VDC  
Approx.10 mA  
Orange  
10  
D4SL-N / D4SL-NSK10-LK@  
Characteristics  
Degree of protection *1  
IP67 (EN60947-5-1)  
Mechanical  
Electrical  
1,000,000 operations min.  
150,000 operations min. (1 A resistance at 125 VAC) *3  
0.05 to 1 m/s  
Durability *2  
Operating speed  
Operating frequency  
5 operations minute max.  
60 N min. (EN60947-5-1)  
15 mm min. (EN60947-5-1)  
1,300 N min.  
Direct opening force *4  
Direct opening travel *4  
Holding force *5  
Contact resistance  
200 mΩ max.  
Minimum applicable load *6  
Rated insulation voltage (Ui)  
Rated frequency  
1 mA resistive load at 5 VDC (N-level reference value)  
150 V (EN60947-5-1)  
50/60 Hz  
Protection against electric shock  
Pollution degree (operating environment)  
Class II (double insulation)  
3 (EN60947-5-1)  
Between terminals of same polarity  
1.5 kV  
Impulse  
withstand voltage  
(EN60947-5-1)  
Between terminals of different polarity 1.5 kV  
Between other terminals and  
non-current carrying metallic parts  
2.5 kV  
Insulation resistance  
100 Ω min. (at 500 VDC)  
10 to 55 Hz, 0.35 mm single amplitude  
80 m/s2 min.  
Vibration resistance Malfunction  
Malfunction  
Shock resistance  
Destruction  
1,000 m/s2 min.  
Conditional short-circuit current  
100 A (EN60947-5-1)  
2.5A (11-42, 21-52, 21-22)  
1A (Others)  
Conventional free air thermal current (Ith)  
Ambient operating temperature  
Ambient operations humidity  
10 to 55°C (with no icing)  
95% max.  
Head: Resin  
Approx. 290 g (Connector model)  
Approx. 330 g (Terminal block model)  
Head: Metal  
Weight  
Approx. 370 g (Connector model)  
Approx. 410 g (Terminal block model)  
Note: 1. The above values are initial values.  
2. The Switch contacts can be used with either standard loads or microloads.  
Once the contacts have been used to switch a load, however, they cannot be used to switch smaller loads.  
The contact surfaces will become rough once they have been used and contact reliability for smaller loads may be reduced.  
*1. The degree of protection is tested using the method specified by the standard (EN60947-5-1).  
Confirm that sealing properties are sufficient for the operating conditions and environment beforehand.  
Although the switch box is protected from dust, oil or water penetration, do not use the D4SL in places where cutting chips, oil, water or  
chemicals may enter through the key hole on the head, otherwise Switch damage or malfunctioning may occur.  
*2. The durability is for an ambient temperature of 5 to 35°C and an ambient humidity of 40% to 70%. For more details, consult your OMRON  
representative.  
*3. Do not pass the 1 A, 125 VAC load through more than 3 circuits.  
*4. These figures are minimum requirements for safe operation.  
*5. This figure is based on the GS-ET-19 evaluation method.  
*6. This value will vary with the switching frequency, environment, and reliability level.  
Confirm that correct operation is possible with the actual load beforehand.  
11  
D4SL-N / D4SL-NSK10-LK@  
Connection  
Internal Circuit Diagram  
Without indicator  
With indicator  
24VDC  
E1 (+)  
D
24VDC  
E1 (+)  
D
R
Control  
circuit  
Control  
circuit  
ZD  
D
ZD  
D
LED  
E2 ()  
E2 ()  
Circuit Connection Example  
Direct opening contacts used as safety-circuit input are indicated with the mark.  
Do not switch circuits for three or more standard loads at the same time.  
Doing so may adversely affect insulation performance.  
DC solenoids have polarity. (E1: Positive, E2: Negative)  
Confirm terminal polarity before wiring.  
If a lock is required for safety, design the system so that the closing of the NC contacts on both the door open/closed detection switch and the  
lock monitor switch is detected.  
Connection Example for D4SL-N@AF@-@  
Contacts 12 and 41 are internally connected.  
Connection Example for D4SL-N@SF@-@  
There is no internal connection, so connect contacts 22 and 42 or 21  
and 42 externally.  
E1  
(+)  
9
E1  
(+)  
Door open/  
closed detection  
switch  
9
Door open/  
closed detection  
switch  
E2  
()  
10  
E2  
()  
10  
To safety circuit  
(Not use)  
1
3
5
12  
41  
63  
2
42  
64  
11  
33  
To safety circu  
1
3
5
2
42  
22  
64  
41  
21  
33  
4
8
Shortcircuit  
(Not use)  
4
8
To safety circu  
To control circuit  
34  
6
To control circ  
34  
6
63  
Lock monitor  
switch  
7
Lock monitor  
switch  
7
To control circuit  
To control circ  
Connection Example for D4SL-N@EF@-D@  
Contacts 12 and 41 are internally connected.  
Connection Example for D4SL-N@NF@-D@  
Contacts 12 and 41 and contacts 22 and 51 are internally connected.  
E1  
(+)  
E1  
(+)  
9
9
Door open/  
closed detection  
Door open/  
closed detection  
switch  
LED  
LED  
E2  
()  
E2  
()  
switch  
10  
10  
To safety circuit  
To safety circuit  
To control circuit  
To safety circuit  
To safety circuit  
To control circuit  
1
3
5
12  
22  
1
3
5
12  
41  
63  
41  
51  
63  
2
2
11  
21  
33  
42  
22  
64  
42  
11  
21  
33  
4
8
4
8
52  
64  
34  
6
34  
6
Lock monitor  
switch  
Lock monitor  
switch  
7
7
To control circuit  
To control circuit  
12  
D4SL-N / D4SL-NSK10-LK@  
Contact Form  
Indicates conditions where the Key is inserted and the lock is applied.  
Contact Form  
Contact  
(door open/  
closed detection  
and lock monitor)  
Door open/  
closed  
detection  
Model  
Operating pattern  
Remarks  
Lock  
monitor  
Door open/closed  
detection  
Lock position  
Only NC contact 11-12 has a  
certified direct opening  
mechanism.  
The terminals 42-11, 34-33, and  
64-63 can be used as unlike  
poles.  
Lock monitor  
2
8
1
5
42-11  
34-33  
64-63  
42  
41 12  
11  
1NC/1NO+  
1NC/1NO  
On  
D4SL-N@A@@-@  
64  
63 34  
33  
Stroke  
Operation Key Insertion  
completion position  
Extraction  
completion position  
7
6
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 has a  
certified direct opening  
mechanism.  
The terminals 42-11, 34-33, and  
62-61 can be used as unlike  
poles.  
Lock monitor  
2
8
1
5
42-11  
34-33  
62-61  
42  
41 12  
11  
On  
D4SL-N@B@@-@  
D4SL-N@C@@-@  
D4SL-N@D@@-@  
D4SL-N@S@@-@  
D4SL-N@T@@-@  
D4SL-N@U@@-@  
D4SL-N@V@@-@  
1NC/1NO+2NC  
2NC+1NC/1NO  
2NC+2NC  
Stroke  
Operation Key Insertion  
completion position  
33  
62  
61 34  
Extraction  
7
6
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 and 31-  
32 has a certified direct opening  
mechanism.  
The terminals 42-11, 32-31, and  
64-63 can be used as unlike  
poles.  
Lock monitor  
2
8
1
5
42-11  
32-31  
64-63  
42  
41 12  
11  
On  
Stroke  
Operation Key Insertion  
completion position  
64  
63 32  
31  
Extraction  
7
6
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 and 31-  
32 has a certified direct opening  
mechanism.  
The terminals 42-11, 32-31, and  
62-61 can be used as unlike  
poles.  
Lock monitor  
2
8
1
5
42-11  
32-31  
62-61  
42  
41 12  
11  
On  
Stroke  
Operation Key Insertion  
completion position  
62  
61 32  
31  
Extraction  
7
6
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 21-22 has a  
certified direct opening  
On mechanism.  
Lock monitor  
42-41  
22-21  
34-33  
64-63  
2
8
1
41  
42  
1NC/1NO+  
1NC/1NO  
4
3
5
The terminals 42-41, 22-21, 34-  
33, and 64-63 can be used as  
unlike poles.  
22  
21  
33  
64  
63 34  
Stroke  
Operation Key Insertion  
completion position  
7
6
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 21-22 has a  
certified direct opening  
mechanism.  
The terminals 42-41, 22-21, 34-  
33, and 62-61 can be used as  
unlike poles.  
Lock monitor  
42-41  
22-21  
34-33  
62-61  
2
8
1
41  
42  
On  
1NC/1NO+2NC  
2NC+1NC/1NO  
2NC+2NC  
4
3
5
22  
21  
33  
62  
61 34  
Stroke  
Operation Key Insertion  
completion position  
7
6
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 21-22 and 31-  
32 has a certified direct opening  
mechanism.  
The terminals 42-41, 22-21, 32-  
31, and 64-63 can be used as  
unlike poles.  
Lock monitor  
42-41  
22-21  
32-31  
64-63  
2
8
1
41  
42  
On  
4
3
5
22  
21  
31  
64  
63 32  
Stroke  
Operation Key Insertion  
completion position  
7
6
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 21-22 and 31-  
32 has a certified direct opening  
mechanism.  
The terminals 42-41, 22-21, 32-  
31, and 62-61 can be used as  
unlike poles.  
Lock monitor  
42-41  
22-21  
32-31  
62-61  
2
8
1
41  
42  
On  
4
3
5
22  
21  
31  
62  
61 32  
Stroke  
Operation Key Insertion  
completion position  
7
6
Extraction  
completion position  
13  
D4SL-N / D4SL-NSK10-LK@  
Contact Form  
Contact  
(door open/  
closed detection  
and lock monitor)  
Door open/  
closed  
detection  
Model  
Operating pattern  
Remarks  
Lock  
monitor  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 and 21-  
22 has a certified direct opening  
mechanism.  
The terminals 42-11, 22-21, 34-  
33, and 64-63 can be used as  
unlike poles.  
Lock monitor  
42-11  
22-21  
34-33  
64-63  
2
8
1
42  
41 12  
4
11  
On  
D4SL-N@E@@-@  
2NC/1NO+  
1NC/1NO  
3
5
22  
21  
33  
64  
63 34  
Stroke  
Operation Key Insertion  
completion position  
7
6
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 and 21-  
22 has a certified direct opening  
mechanism.  
The terminals 42-11, 22-21, 34-  
33, and 62-61 can be used as  
unlike poles.  
Lock monitor  
42-11  
22-21  
34-33  
62-61  
2
8
1
3
42  
41 12  
4
11  
On  
D4SL-N@F@@-@  
D4SL-N@G@@-@  
D4SL-N@H@@-@  
D4SL-N@N@@-@  
D4SL-N@P@@-@  
D4SL-N@Q@@-@  
D4SL-N@R@@-@  
2NC/1NO+2NC  
3NC+1NC/1NO  
3NC+2NC  
22  
21  
33  
62  
61 34  
Stroke  
Operation Key Insertion  
completion position  
7
6
5
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 ,21-22  
and 31-32 has a certified direct  
opening mechanism.  
The terminals 42-11, 22-21, 32-  
31, and 64-63 can be used as  
unlike poles.  
Lock monitor  
42-11  
22-21  
32-31  
64-63  
2
8
1
3
42  
41 12  
4
11  
On  
22  
21  
31  
64  
63 32  
Stroke  
Operation Key Insertion  
completion position  
7
6
5
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 ,21-22  
and 31-32 has a certified direct  
opening mechanism.  
The terminals 42-11, 22-21, 32-  
31, and 62-61 can be used as  
unlike poles.  
Lock monitor  
42-11  
22-21  
32-31  
62-61  
2
8
1
3
42  
41 12  
11  
On  
4
22  
21  
31  
62  
61 32  
Stroke  
Operation Key Insertion  
completion position  
7
6
5
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 and 21-  
22 has a certified direct opening  
mechanism.  
The terminals 42-11, 52-21, 34-  
33, and 64-63 can be used as  
unlike poles.  
Lock monitor  
42-11  
52-21  
34-33  
64-63  
2
4
1
3
42  
41 12  
11  
On  
2NC/1NO+  
2NC/1NO  
52  
64  
51 22  
63 34  
21  
33  
Stroke  
Operation Key Insertion  
completion position  
8
7
6
5
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 and 21-  
22 has a certified direct opening  
mechanism.  
The terminals 42-11, 52-21, 34-  
33, and 62-61 can be used as  
unlike poles.  
Lock monitor  
42-11  
52-21  
34-33  
62-61  
2
4
1
3
42  
41 12  
11  
On  
2NC/1NO+3NC  
3NC+2NC/1NO  
3NC+3NC  
52  
62  
51 22  
61 34  
21  
33  
Stroke  
Operation Key Insertion  
completion position  
8
7
6
5
Extraction  
completion position  
Lock position  
Only NC contact 11-12 ,21-22  
and 31-32 has a certified direct  
opening mechanism.  
The terminals 42-11, 52-21, 32-  
31, and 64-63 can be used as  
unlike poles.  
Door open/closed  
detection  
Lock monitor  
42-11  
52-21  
32-31  
64-63  
2
4
1
3
42  
41 12  
11  
On  
52  
64  
51 22  
63 32  
21  
31  
Stroke  
Operation Key Insertion  
completion position  
8
7
6
5
Extraction  
completion position  
Lock position  
Door open/closed  
detection  
Only NC contact 11-12 ,21-22  
and 31-32 has a certified direct  
opening mechanism.  
The terminals 42-11, 52-21, 32-  
31, and 62-61 can be used as  
unlike poles.  
Lock monitor  
42-11  
52-21  
32-31  
62-61  
2
4
1
3
42  
41 12  
11  
On  
52  
62  
51 22  
61 32  
21  
31  
Stroke  
Operation Key Insertion  
completion position  
8
7
6
5
Extraction  
completion position  
14  
D4SL-N / D4SL-NSK10-LK@  
Dimensions and Operating Characteristics  
(Unit:mm)  
Switches  
D4SL-N@@@@-@N (Connector Type)  
29.2  
29.2  
Head cap  
9
Pre-travel distance  
B
Operation Key  
39  
37  
22  
A
Side mounting  
Three, 4.3 dia.  
Mounting hole  
Front-side mounting  
Two, 4.3 dia.  
Mounting hole  
±0.2  
26.3  
26.3  
39  
10  
Spacers  
4.5 dia.  
(depth: 1.6)  
42.9  
±0.2  
38.7  
38.5  
±0.2  
22  
31.5  
4
±0.2  
±0.2  
41.7  
41.7  
(62.75)  
±0.2  
41.7  
±0.2  
41.7  
(62.75)  
(73.5)  
112.1  
(155)  
(73.5)  
±0.8  
Label  
4.5 dia.  
(depth: 1.6)  
4.5 dia.  
LED indicators  
(depth: 1.6)  
4.5 dia.  
LED indicators  
Release key  
(10.85)  
(depth: 1.6)  
Release key  
A
(8)  
(1)  
)
(10.85  
B
B-B  
A-A  
26 dia.  
One, Conduit  
Conduit cap  
Model  
D4SL-N@@@@-@N  
Operating characteristics  
Key insertion force  
Key extraction force  
15 N max.  
30 N max.  
Two, Cover mounting screw  
Pre-travel distance  
15 mm max.  
3 mm min.  
Movement before being locked  
D4SL-N@@@@-@ (Terminal Block Type)  
29.2  
Head cap  
29.2  
9
Pre-travel distance  
B
39  
Operation Key  
A
37  
22  
±0.2  
Side mounting  
Three, 4.3 dia.  
Mounting hole  
Front-side mounting  
Two, 4.3 dia.  
Mounting hole  
26.3  
26.3  
10  
39  
Spacers  
4.5 dia.  
(depth: 1.6)  
42.9  
31.5  
±0.2  
38.7  
38.5  
4
±0.2  
22  
±0.2  
41.7  
±0.2  
41.7  
(62.75)  
±0.2  
41.7  
±0.2  
41.7  
(62.75)  
(73.5)  
(73.5)  
(179.9)  
4.5 dia.  
(depth: 1.6)  
4.5 dia.  
(depth: 1.6)  
±0.8  
137  
4.5 dia.  
(depth: 1.6)  
LED indicators  
LED indicators  
Release key  
Release key  
(10.85)  
B
(10.85  
)
(8)  
(1)  
A
B-B  
A-A  
26 dia.  
One, Conduit  
Conduit cap  
Model  
Operating characteristics  
D4SL-N@@@@-@  
Key insertion force  
Key extraction force  
15 N max.  
30 N max.  
Two, Cover mounting screw  
Pre-travel distance  
15 mm max.  
3 mm min.  
Movement before being locked  
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.  
15  
D4SL-N / D4SL-NSK10-LK@  
Operation key  
D4SL-NK1  
D4SL-NK1S  
28  
21.5  
29  
19.5  
13  
29  
7
7
7
7
22.7  
35 15  
22.7  
35 15  
4.3  
Four, R2.15  
4.3  
Four, R2.15  
2
2
D4SL-NK1G  
D4SL-NK2  
28  
21.5  
29  
15.6  
14.5  
29  
8
7
7
12  
22.7  
35 20  
15  
22.7  
35  
Two, 4.3 dia.  
Two, 9 dia.  
4.3  
Four, R2.15  
(5.2)  
2
2
Mounting rubber  
D4SL-NK2G  
D4SL-NK3  
14.5  
8
17.2  
29  
22.7  
35  
20  
12  
17.7  
4
29  
15  
4.5 dia.  
8 dia.  
Angle adjustment bolt  
Two, 4.3 dia.  
Two, 9 dia.  
9 dia.  
22.7  
20°  
30 40 56  
2
Mounting rubber  
Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.  
Connector Cables  
D4SL-CN@  
40  
(30)  
L
(150)  
Model  
L size  
1 m  
10  
9
(5)  
8
7
D4SL-CN1  
D4SL-CN3  
D4SL-CN5  
6
5
4
3 m  
3
2
*
1
Cable  
5 m  
AWG22, 10 conductors  
Connector pin No.  
Connector  
* All 10 lead wires laid bare.  
Connector No. Lead wire color  
Connector No. Lead wire color  
1
2
3
4
5
Black  
Black/White  
Red  
6
7
Green/White  
Yellow  
8
Yellow/White  
Brown  
Red/White  
Green  
9
10  
Brown/White  
16  
D4SL-N / D4SL-NSK10-LK@  
Slide Key  
D4SL-NSK10-LK  
Open door  
Close door  
10  
40×40  
12.5  
Lockout key  
(26.8)  
(314)  
(147)  
107  
(232.2)  
(81.8)  
(71.8)  
19.1  
(35)  
(35)  
(30.2)  
(112)  
8
+10  
15  
(Between Slide Key)  
5  
(20)  
11.5  
B
Shot bolt  
B
SLIDE  
LOCK  
SLIDE  
LOCK  
(56.5)  
17  
50  
(64)  
SLIDE  
FREE  
SLIDE  
FREE  
(90.4)  
20  
(76.2)  
Guide  
38.7  
(32.5)  
22  
Four, M6  
mounting holes  
Slide base  
D4SL-NK1S  
Operation Key  
Three, M4  
(330)  
4
Cross-sectional view A-A  
4
Guard Lock Safety-door Switch  
D4SL-N  
17  
A
A
Cross-sectional view B-B  
(19.5)  
11.5  
11.6  
Two, M6  
mounting holes  
Switch base  
12.5  
D4SL-NSK10-LKH  
Open door  
Close door  
10  
Aluminum frame  
40×40  
12.5  
Lockout key  
(323)  
(147)  
(71.8)  
19.1  
(26.8)  
(35)  
(35)  
(241.2)  
(81.8)  
(121)  
107  
+10  
(39.2)  
15  
(Between Slide Key)  
5  
8
(20)  
40  
11.5  
Shot bolt  
B
B
(115)  
(78)  
(56.5)  
(76.2)  
SLIDE  
LOCK  
SLIDE  
LOCK  
17  
50  
SLIDE  
FREE  
(64)  
90.4  
SLIDE  
FREE  
20  
12 dia.  
40 dia.  
38.7  
Inner Lever  
(32.5)  
22  
Guide  
Four, M6  
mounting holes  
Slide base  
D4SL-NK1S  
Operation Key  
Three, M4  
330  
4
Cross-sectional view B-B  
4
Cross-sectional view A-A  
17  
A
A
(19.5)  
Guard Lock Safety-door Switch  
D4SL-N@@@@-@@  
11.5  
11.6  
Guard Lock Safety-door Switch  
D4SL-N@@@@-@@N  
Two, M6  
mounting holes  
Switch base  
12.5  
17  
D4SL-N / D4SL-NSK10-LK@  
Operation key Mounting  
D4SL-N+D4SL-NK1  
With Top-inserted Operation Key  
With Front-inserted Operation Key  
Horizontal  
insertion radius  
59 min.  
(37)  
>
R
=
180  
61.5 max.  
Key insertion  
position  
(15)  
Center tolerance of  
key hole: 0.8  
Horizontal  
Vertical  
insertion radius  
Center tolerance of  
key hole: 0.8  
insertion radius  
>
Center tolerance of  
key hole: 0.8  
R
180  
=
>
R
200  
=
(15)  
Vertical  
9
insertion radius  
59 min.  
(37)  
>
R
=
200  
61.5 max.  
Key insertion  
position  
60.5 min.  
63 max.  
Key insertion  
position  
60.5 min.  
63 max.  
Key insertion  
position  
(38.5)  
(38.5)  
31.5  
Center tolerance of  
key hole: 0.8  
D4SL-N+D4SL-NK1S  
With Top-inserted Operation Key  
With Front-inserted Operation Key  
Horizontal  
insertion radius  
50.5 min.  
53 max.  
(37)  
>
R
=
180  
Key insertion  
position  
(15)  
Center tolerance of  
key hole: 0.8  
Horizontal  
Vertical  
insertion radius  
Center tolerance of  
key hole: 0.8  
insertion radius  
>
Center tolerance of  
key hole: 0.8  
R
180  
=
>
R
200  
=
(15)  
Vertical  
insertion radius  
9
50.5 min.  
53 max.  
(37)  
>
R
200  
=
Key insertion  
position  
52 min.  
52 min.  
54.5 max.  
Key insertion  
position  
54.5 max.  
Key insertion  
position  
(38.5)  
(38.5)  
31.5  
Center tolerance of  
key hole: 0.8  
D4SL-N+D4SL-NK1G  
With Top-inserted Operation Key  
With Front-inserted Operation Key  
Horizontal  
insertion radius  
59 min.  
61.5 max.  
(37)  
>
=
Pitch 12 mm  
Pitch 20 mm  
R
R
120  
170  
>
=
Key insertion  
position  
Horizontal  
insertion radius  
Pitch 12 mm  
Pitch 20 mm  
(Pitch 12 mm) Center tolerance of  
(Pitch 20 mm) key hole: 0.8  
Center tolerance of  
key hole: 0.8  
(Pitch 12 mm)  
(Pitch 20 mm)  
Vertical  
insertion radius  
R
Center tolerance of  
key hole: 0.8  
>
=
R
R
120  
170  
>
=
>
140  
=
9
Vertical  
(6.4)  
insertion radius  
59 min.  
61.5max.  
(37)  
>
R
=
140  
Key insertion  
position  
60.5 min.  
63 max.  
60.5 min.  
63 max.  
Key insertion  
position  
Key insertion  
position  
(38.5)  
(38.5)  
31.5  
(28.9)  
Center tolerance of  
key hole: 0.8  
18  
D4SL-N / D4SL-NSK10-LK@  
D4SL-N+D4SL-NK2  
With Top-inserted Operation Key  
With Front-inserted Operation Key  
Horizontal  
insertion radius  
53.1 min.  
55.6 max.  
(37)  
>
R
180  
=
Key insertion  
position  
(15) Center tolerance of  
key hole: 0.8  
Horizontal  
Vertical  
Center tolerance of  
key hole: 0.8  
insertion radius  
insertion radius  
>
Center tolerance of  
key hole: 0.8  
R
180  
=
>
200  
=
R
(15)  
Vertical  
(17)  
9
53.1 min.  
55.6 max  
insertion radius  
(37)  
>
R
200  
=
Key insertion  
position  
54.6 min.  
57.1 max.  
Key insertion  
position  
54.6 min.  
57.1 max.  
Key insertion  
position  
(39.5)  
(38.5)  
(38.5)  
31.5  
Center tolerance of  
key hole: 0.8  
D4SL-N+D4SL-NK2G  
With Top-inserted Operation Key  
With Front-inserted Operation Key  
Horizontal  
insertion radius  
54.7 min.  
57.2 max.  
(37)  
>
=
Pitch 12 mm  
Pitch 20 mm  
R
R
120  
170  
>
=
Key insertion  
position  
Horizontal  
insertion radius  
Pitch 12 mm  
Pitch 20 mm  
(Pitch 12 mm) Center tolerance of  
(Pitch 20 mm) key hole: 0.8  
Center tolerance of  
key hole: 0.8  
(Pitch 12 mm)  
(Pitch 20 mm)  
Vertical  
Center tolerance of  
key hole: 0.8  
>
=
R
R
120  
170  
insertion radius  
>
=
>
R
140  
=
Vertical  
(21.5)  
9
54.7 min.  
57.2 max.  
insertion radius  
(37)  
>
R
140  
=
Key insertion  
position  
56.2 min.  
58.7 max.  
Key insertion  
position  
56.2 min.  
58.7 max.  
Key insertion  
position  
(38.5)  
(38.5)  
(39.5)  
31.5  
Center tolerance of  
key hole: 0.8  
D4SL-N+D4SL-NK3  
With Front-inserted Operation Key  
With Top-inserted Operation Key  
Horizontal  
55.2 min.  
57.7 max.  
insertion radius  
(37)  
>
R
50  
=
Key insertion  
position  
±0.15  
(40  
)
0.15  
)
(40  
Center tolerance of  
key hole: 0.8  
Center tolerance of  
key hole: 0.8  
Horizontal  
Vertical  
insertion radius  
Center tolerance of  
key hole: 0.8  
insertion radius  
>
R
50  
=
>
R
200  
=
Vertical  
insertion radius  
(9)  
55.2 min.  
57.7 max.  
Key insertion  
position  
(37)  
>
R
=
200  
56.7 min.  
59.2 max.  
Key insertion  
position  
56.7 min.  
59.2 max.  
Key insertion  
position  
(38.5)  
(38.5)  
31.5  
Center tolerance of  
key hole: 0.8  
19  
D4SL-N / D4SL-NSK10-LK@  
Application Example  
D4SL-N Application Example  
PL/Safety Category  
Applied models  
Stop category  
Reset method  
D4SL-N@R@A-@ Compact  
Safety Door Switch with Magnetic Lock (mechanical lock)  
G9SA-301 (24 VAC/DC)  
Equivalent to PLe/4  
0
Manual  
Safety Relay Unit  
Application Overview  
If the guard is opened, it is detected with S2 and the power supply to the motor (M) is shut OFF.  
When the guard is closed, the lock status can be detected and the power supply to the motor (M) remains shut OFF until limit switch S3 is pressed.  
S1: Safety Limit Switch with direct opening mechanism  
Lock release signal  
(D4B-N, D4N or D4F)  
KM1  
S2: D4SL-N  
KM2  
S3: Reset switch  
S2  
S4: Lock release switch  
KM1 and KM2: Magnetic Contactor  
M: 3-phase motor  
S4  
9
10  
42  
41  
12  
11  
2
1
3
4
5
6
7
8
to PLC  
to PLC  
Guard  
S1  
Feedback loop  
OPEN  
KM1  
KM2  
S3  
Stop signal  
A1 A2 T11  
TH  
T12  
T31  
T32  
13 23 33 41  
3
4
1
K1  
K2  
a
K1  
K2  
1
2
3
4
5
6
SA  
Control  
Circuit  
a
b
2
5
JP  
K1  
b
K2  
6
PE T21  
T23 T22  
A
B
14 24 34 42  
KM1 KM2  
Guard opens  
Timing Chart  
Limit switch S1  
KM1  
Guard Lock  
Safety-door Switch S2  
Lock release signal  
S4  
KM2  
Guard can be opened  
Stop signal  
M
Reset switch S3  
K1 and K2 (NC)  
K1 and K2 (NO)  
KM1 and KM2 (NC)  
KM1 and KM2 (NO)  
Note: 1. The above circuit diagram is for Category 3.  
2. Numbers inside the boxes are terminal numbers printed on the  
product.  
20  
D4SL-N / D4SL-NSK10-LK@  
Safety Precautions  
Be sure to read the precautions for All Safety Door Switches in the website at:http://www.ia.omron.com/.  
Indicates an imminently hazardous  
situation which, if not avoided, is likely to  
result in serious injury or may result in  
death. Additionally there may be severe  
property damage.  
Precautions for Safe Use  
D4SL-N  
DANGER  
CAUTION  
Operating Environment  
Do not use the Switch submersed in oil or water or in locations  
continuously subject to splashes of oil or water. Doing so may result  
in oil or water entering the Switch. (The IP67 degree of protection of  
the Switch specifies the amount of water penetration after the Switch  
is submerged in water for a certain period of time.)  
Indicates a potentially hazardous situation  
which, if not avoided, may result in minor  
or moderate injury or in property damage.  
Precautions  
for Safe Use  
Supplementary comments on what to do  
or avoid doing, to use the product safely.  
Wiring  
Do not switch circuits for three or more standard loads (125 VAC,  
1A). Doing so may adversely affect insulation performance.  
Do not allow the load current to exceed the rated value.  
For metal connector, use a connector with the screw length of 9  
mm or less. Otherwise it may result in electric shock.  
Do not use metallic conduits. In the event of damage to the conduit  
opening, this may cause seal failure and may result in electric  
shock.  
Supplementary comments on what to do  
or avoid doing, to prevent failure to  
operate, malfunction or undesirable effect  
on product performance.  
Precautions  
for Correct  
Use  
DANGER  
Do not use a metal connector for a 1/2-14NPT connector. In the  
event of damage to the conversion adapter, this may cause seal  
failure and may result in electric shock.  
Injury may occasionally occur. Always check to make  
sure that the safety functions operate correctly before  
using the machine. The safety functions may not  
operate correctly because of wiring mistakes, setting  
mistakes, or Switch malfunction, causing some  
machines to continue operating in situations where  
they should be stopped.  
Always attach the cover after completing wiring and before using  
the Switch. Do not supply power when the cover is not attached.  
Electric shock may occur if the Switch is used without the cover  
attached.  
When using the terminal block type, make sure that foreign  
material does not adhere to the terminal block board. Otherwise a  
short circuit may occur between terminals and safety functions  
may fail to work properly.  
Installation  
CAUTION  
Make sure the Switch is mounted securely to prevent it from falling  
off. Otherwise injury may result.  
D4SL-N  
Do not use a Switch as a stopper.  
Injury may occasionally occur. When the Switch  
function is damaged, some machines may continue  
operating in situations where they should be stopped.  
Do not impose a force exceeding the key holding  
force.  
Always provide a lock separate from the Switch,  
attach a warning seal to avoid excessive force applied  
to the Switch, or provide an indicator lamp to show the  
locked/unlocked status of the door.  
Head  
Stopper  
Be sure to install a stopper as shown in the  
following illustration so that the Operation  
Key does not touch the head.  
Do not subject the Switch to a shock that  
exceeds the Switch's shock resistance of  
1,000 m/s2.  
Operation Key  
Switch  
D4SL-NSK10-LK@  
Do not use this product mounted so that it slides  
vertically.  
This may cause malfunction, resulting in personal  
injury.  
Do not insert the operation key with the door open.  
Devices may start to operate, resulting in injury.  
21  
D4SL-N / D4SL-NSK10-LK@  
D4SL-NSK10-LK@  
Precautions for Correct Use  
Do not drop the Product. Doing so may prevent the Product from  
functioning to full capacity.  
D4SL-N  
Mount the Product securely to prevent it from falling. Otherwise,  
injury may occur.  
Solenoid Lock Models  
Be sure to supply power to the solenoid after the door is closed  
(after the Operation Key is inserted).  
Do not attempt to disassemble or modify the Switch. Doing so may  
cause the Switch to malfunction.  
The solenoid lock locks the door only when power is supplied to the  
solenoid. Therefore, the door will be unlocked if the power supply  
to the solenoid stops. Therefore, do not use solenoid lock models  
for machines that may be operating and dangerous even after the  
machine stops operating.  
Make sure that the gap between the shot bolt and the guide is 0.5  
mm.  
Otherwise, excessive wear or damage may cause malfunction.  
To ensure safety, do not operate the Switch with anything other  
than the Slide Key Unit.  
Your hand may be injured by being pinched between the Operation  
Key and Switch when closing the door with your hand on the  
Product.  
Be careful to avoid pinching your hand when operating the Slide  
Handle.  
Release Key  
The release key is used to unlock the Switch in case of emergency  
or if the power supply to the Switch stops.  
If the release key setting is changed from LOCK to UNLOCK, the  
lock will be released and the safety door can be opened  
(mechanical lock models only).  
Do not impose a force of exceeding 1 Nm when operating the  
Lockout Key.  
Å@  
Front  
D4SL-N@@@@-@  
Otherwise, the Product may be damaged and may not operate  
properly.  
D4SL-N@@@@-@4  
To prevent damage, attach the supplied labels for display near the  
Product.  
LOCK  
LOCK  
Do not force the slide handle to move when the lockout key is not  
inserted. Doing so may damage the product and make operation  
impossible.  
Do not force the slide handle to move when the door is locked.  
Doing so may damage the product and make operation impossible.  
Do not close the door with the shot bolt removed. Doing so may  
damage the product and make operation impossible.  
Turn the Lockout Key to the "SLIDE LOCK" position and remove it  
when opening the door to prevent a third party from operating the  
Slide Handle.  
UNLOCK  
UNLOCK  
The durability of the Switch varies considerably depending on the  
switching conditions. Always confirm the usage conditions by using  
the Switch in an actual application, and use the Switch only for the  
number of switching operations given in the performance  
specifications.  
Back  
D4SL-N@@@@-@  
D4SL-N@@@@-@4  
LOCK  
LOCK  
The user must not maintain or repair equipment incorporating the  
Switch. Contact the manufacturer of the equipment for any  
maintenance or repairs required.  
Refer to the D4SL-N Guard Lock Safety-door Switch Instruction  
Sheet about storage conditions, ambient conditions,  
Switch details, and handling methods.  
Do not apply excessive force in the direction of the slide. This may  
damage the product and cause it to malfunction.  
Do not force the switch or cable. This may  
SLIDE  
LOCK  
SLIDE  
FREE  
damage the product. The cable should be fixed at  
a point separate from the switch.  
UNLOCK  
UNLOCK  
After setting the release key to UNLOCK to, for example, perform  
maintenance, be sure to return it to LOCK setting before resuming  
operation.  
The release key is set in the unlock position at the factory for the  
D4SL-N@@@A and to the lock position for the D4SL-N@@@G.  
In the unlock position, even when the door of large machines or  
stamping machines is closed during preliminary adjustment, the  
door will remain unlocked and the machines will not be activated.  
Do not use the release key to start or stop machines.  
The auxiliary lock must be released only by authorized personnel.  
Do not impose a force exceeding 0.2 Nm on the release key  
screws. The release key may be damaged and may not operate  
properly.  
To prevent the release key from being used by unauthorized  
personnel, set it to LOCK and seal it with sealing wax.  
Mounting Covers  
Confirm that the seal rubber has no defects before use. If the seal  
rubber is displaced or raised, or has foreign particles adhered to it,  
the sealing capability of the seal rubber will be adversely affected.  
22  
D4SL-N / D4SL-NSK10-LK@  
Hinged Door  
Securing the Door  
If the Switch is mounted too close to the hinge, the force imposed  
on the lock will be much larger than for locations far from the hinge  
and the lock may be damaged. Mount the Switch close to the  
handle.  
When the door is closed (with the  
Operation Key inserted), the Operation  
Key may exceed the set zone because  
of, for example, the door's own weight,  
machine vibration, or the door cushion  
rubber.  
Secure the door with a stopper (hook)  
so that the Operation Key remains  
within the set zone.  
Set zone  
(0.5 to 3 mm)  
Mounting  
Appropriate Tightening Torque  
Operation key  
Loose screws may result in malfunction. Tighten the screws to the  
specified torques.  
Spacer  
Cover mounting  
0.4 to 0.5 Nm  
screw  
Do not remove a spacer. Rotate the spacer in accordance with the  
Switch mounting direction. Use of the Switch without spacer will  
reduce the lock strength.  
2.4 to 2.8 Nm (D4SL-NK@ and -NK@S)  
0.75 to 1.15 Nm (D4SL-NK@G)  
Operation Key  
mounting screw  
Switch mounting  
screw  
0.75 to 1.15 Nm  
1.8 to 2.2 Nm (except 1/2-14NPT)  
1.4 to 1.8 Nm (1/2-14NPT)  
Mounting side  
Connector  
Terminal screw  
* Terminal block type  
only  
0.5 to 0.6 Nm (D4SL-N@@@@-@@)  
Spacer  
Switch and Operation Key Mounting  
Wiring  
Mount the Switch and Operation Key securely to the applicable  
tightening torque with M4 screws. Always use washers.  
The switch can be fastened more firmly by a stud (4 mm dia., 1.5  
mm max height) inserted from back side at the hole of the switch.  
Circuit Connection Example  
Direct opening contacts used as safety-circuit inputs are indicated  
with the  
mark.  
DC solenoids have polarity. (E1: +, E2: ) Confirm terminal polarity  
before wiring.  
Switch mounting  
Operation Key mounting  
The current of the 24 VDC solenoid is different from when it is first  
turned ON as to when it is in operation. To take into account  
possible voltage drops, it is important to apply a rated operation  
voltage.  
Front  
0.1  
D4SL-NK1/-NK2  
22  
Two, M4  
Two, M4  
0.15  
41.7  
To enable the 24 VDC solenoid, it is necessary to select the  
appropriate power supply capacity.  
The ON and OFF contact operation will not engage  
simultaneously.  
0.1  
15  
D4SL-NK1G/-NK2G  
0.1  
4
dia. 1.5 max.  
0.1  
Two, M4  
Side  
10  
Be sure to confirm operation under actual operating conditions.  
If a lock is required for safety, design the system so that the closing  
of the NC contacts on both the door open/closed detection switch  
and the lock monitor switch is detected.  
0.1  
±0.1  
or 20  
12  
0.1  
22  
0.1  
Three, M4  
38.7  
D4SL-NK3  
Two, M4  
(D4SL-N@N@@-D@)  
Contacts 12 and 41 and contacts 22 and 51 are internally connected.  
0.15  
41.7  
0.1  
40  
±0.1  
4
dia. 1.5 max.  
E1  
9
(+)  
Door open/  
closed detection  
switch  
Do not impose excessive force on the key top while the operation  
key is inserted into the switch body or drop the switch with the  
operation key inserted to avoid the deformation of the key or the  
breakage of the switch body.  
Do not use the operation key other than dedicated OMRON's  
(D4SL-NK@). Otherwise switch may be damaged.  
Do not use the operation key D4SL-K@. A lock will not be closed  
and a machine will not be activated.  
LED  
E2  
()  
10  
To safety circuit  
To safety circuit  
To control circuit  
1
3
5
12  
22  
41  
51  
63  
2
11  
21  
33  
42  
4
8
52  
64  
34  
6
Lock monitor  
7
switch  
To control circuit  
Be sure that the operation key can be inserted properly to key hole  
with a tolerance of 0.8 mm.  
Insert the operation key into the key hole according to the specified  
“operation key insertion radius in horizontal direction”.  
When mounting at the side of switch body, mount the switch with 3  
points including the head.  
(D4SL-N@SF@-@)  
There is no internal connection, so connect contacts 22 and 42 or 21  
and 42 externally.  
E1  
(+)  
9
Door open/  
closed detection  
switch  
Attach cap heads to any operation key holes that are not being  
used.  
E2  
()  
10  
To safety circuit  
To safety circuit  
1
3
5
2
42  
22  
64  
41  
21  
33  
4
8
Shortcircuit  
To control circuit  
34  
6
63  
Lock monitor  
switch  
7
To control circuit  
23  
D4SL-N / D4SL-NSK10-LK@  
Wiring Precautions for D4SL-N@@@@-@@  
Processing the Conduit Opening  
Do not wire the Switch while power is being supplied. Doing so may  
result in electric shock.  
Do not let particles, such as small pieces of lead wire, enter the  
switch body when wiring.  
Do not directly wire the stranded wire to the terminal block.  
When connecting to the terminals via insulating tube and bar  
terminals, arrange the bar terminals so that they do not rise up onto  
the case or the cover.  
Connect a recommended connector to the opening of the conduit  
and tighten the connector to the proper torque. The case may be  
damaged if excessive tightening torque is applied.  
Use the cable with the connector-specified outside diameter.  
For the 1/2-14NPT conduit, mount a provided conversion adapter  
to use the connector above.  
Recommended Connectors  
Applicable lead wire size: AWG22 to AWG18 (0.3 to 0.75 mm2).  
Use lead wires of an appropriate length. Not doing so may result in  
excess length causing the cover to rise and not fit properly.  
Remove the terminal block board out of the unit to perform wiring.  
Be sure to insert the connector properly.  
Use a connector with a screw section not exceeding 9 mm.  
Otherwise the screws will protrude into the case interior.  
The connectors given in the following table have connectors with  
screw sections not exceeding 9 mm.  
Use the following connectors to ensure conformance to IP67.  
Do not pull on the lead wires with excessive force. Doing so may  
disconnect them.  
Applicablecable  
Size  
G1/2  
M20  
Manufacturer  
Model  
Remarks  
diameter  
ST-PF1/2  
5380-1002  
1
3
5
7
9
LAPP  
Ace Service Co.  
LAPP  
6.0 to 12.0 mm  
6.0 to 11.0 mm  
7.0 to 13.0 mm  
3
40 mm  
9
6
7
4
LS-2G  
Short type  
5
3
1
ST-M20×1.5  
5311-1020  
10  
8
1/2-  
14NPT  
ST-NPT1/2  
5301-6030  
LAPP  
6.0 to 12.0 mm  
2
3
30 mm  
Use LAPP connectors together with Seal Packing (JPK-16 for G1/  
2, or GPM20 for M20), and tighten to the applicable torque. Seal  
Packing is sold separately.  
2
4
6
8 10  
Recommended Crimp Terminals  
LAPP is a German manufacturer.  
Ace Service Co. is a Japanese manufacturer.  
Manufacturer  
Model  
Applicable wire lead  
AI0.34-8 TQ  
AI0.5-8 WH  
AI0.75-8 GY  
AWG22  
AWG20  
AWG18  
PHOENIX  
CONTACT  
L1: 14 mm max.  
L1  
L2: 8 mm max.  
L2  
Wiring Precautions for D4SL-N@@@@-@@N  
Do not wire the Switch while power is being supplied. Doing so may  
result in electric shock.  
Do not let particles, such as small pieces of lead wire, enter the  
switch body when wiring.  
Applicable lead wire size: AWG24 to AWG22 (0.2 to 0.3 mm2).  
Do not apply a current of 2 A or more when using AWG24.  
Use lead wires of an appropriate length. Not doing so may result in  
excess length causing the cover to rise and not fit properly.  
1
2
3
4
5
6
10  
1
2
10  
3
30 mm  
Do not pull on the lead wires with excessive force. Doing so may  
disconnect them.  
Do not forcibly insert the wired socket at the cable side into the  
connector or D4SL-N’s conduit opening. Doing so may cause  
cable break.  
Be sure to insert the cable into the connector or D4SL’s conduit  
opening before performing wiring to the socket, or insert the cable  
into the connector or conduit opening from the opposite side of the  
socket.  
Applicable socket for cable side  
Manufacturer  
Name  
Model  
Housing  
XHP-10  
Contact  
(applicable wire lead:  
AWG24 to AWG22)  
J.S.T. Mfg Co.  
SXH-001T-P0.6  
24  
D4SL-N / D4SL-NSK10-LK@  
D4SL-NSK10-LK@  
Use this product for a lightweight door (20 kg max). Otherwise the  
product may be damaged.  
Differences between Lockout Key and Trapped Key  
(Reference)  
Trapped key  
This product is for D4SL-N Guard Lock Safety-door Switch only.  
This product cannot be used with any other manufacturer's door  
switches.  
Lockout key  
(Refer to information on the  
D4JL-@@@A-@7-@@)  
The door cannot be closed  
unless the lockout key is  
inserted in the slide and  
turned.  
The door cannot be closed  
unless the trapped key is  
inserted in the Door Switch  
and turned.  
Closing  
the door  
Use the Slide Handle in the direction A or B in the following figure.  
SLIDE  
LOCK  
F R E E  
S L I D E  
The door can be opened by  
supplying power to the Door  
Switch solenoid without  
The door can never be opened  
without both supplying power  
to the Door Switch solenoid  
and operating the trapped key.  
SLIDE  
FREE  
L O C K  
S L I D E  
Opening  
the door  
operating the lockout switch.  
B
A
When mounting the operation key, line up the inside edges of the  
long operation key holes with the outer edges of the slide handle  
as in the following figure to ensure easy position adjustment.  
Loose screws may result in malfunction. Use washers and tighten  
the screws to the specified torques. Mount the Slide Base at four  
points with screws. Adding adhesive is recommended for  
preventing the screws from loosening.  
Also, when mounting the Product to a door for disable-prevention  
purposes, purchase and use tamper-resistant screws.  
Approriate Tightening Torque  
Use the supplied special screws to mount the operation key and  
D4SL-N Guard Lock Safety-door Switch.  
To tighten the screws, use the tip of a flat-head screwdriver on the  
screw heads as shown in the following figure.  
Slide Key mounting screw (M6)  
6.0 to 7.0 Nm  
2.4 to 2.8 Nm  
Operation key special mounting screw  
(screws supplied)  
Switch special mounting screw  
(screws supplied)  
0.75 to 1.15 Nm  
9 to 10 Nm  
Note: The special screws are  
designed so that they cannot  
be turned counter-clockwise  
using a flat-head  
Inner Lever  
Technical Specifications  
screwdriver.  
Ambient operating temperature 10 to 55°C (with no icing)  
The special screws cannot be removed once they are tightened.  
Ambient operating humidity  
Mechanical durability  
95% max.  
20,000 operations min.  
Mounting of innner lever  
Mounting method  
1) Detaching of mounting screw  
Remove the handle mounting screw with TORX screwdriver (T30).  
Do not store the Switch where corrosive gases (e.g., H2S, SO2,  
NH3, HNO3 or Cl2) or dust is present, or in locations subject to high  
temperature or humidity.  
Perform maintenance inspections periodically.  
When the lockout key is attached to your wrist, be careful that the  
strap does not get stuck in equipment.  
Handle  
Nomenclature  
Hexagonal nut (M6)  
Handle mounting screw  
(TORX_T30/M6)  
Slide Key Unit  
Spring washer  
(M6)  
Guide  
Shot Bolt  
Fig.1  
Slide Base  
2) Mounting of inner lever  
Tighten A portion of the inner lever to a suitable torque with wrench  
(width across flat: 10mm).  
Tightening Torque  
Slide Handle  
Lockout key  
Operation Key  
Release Key  
.
Inner lever (M6)  
9 to 10 N m  
A
Inner lever  
Spring washer  
(M6)  
D4SL-N Guard Lock Safety-door Switch  
Fig.1  
This product is for Omron, the D4SL-NSK10 and the D4GL-SK10  
only. This product cannot be used with any other products.  
Do not operate the handle with the handle mounting screw  
removed. Doing so may result in malfunction.  
Be careful not to lose the spring washer and hexagonal nut when  
remove the handle mounting screw. (Fig.1)  
Loose inner lever may result in malfunction. Use washers and  
tighten the inner lever to the specified torque. (Fig.2)  
25  
READ AND UNDERSTAND THIS CATALOG  
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions  
or comments.  
Warranty and Limitations of Liability  
WARRANTY  
OMRON’s exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if  
specified) from date of sale by OMRON.  
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,  
MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT  
THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR  
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.  
LIMITATIONS OF LIABILITY  
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR  
COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY,  
NEGLIGENCE, OR STRICT LIABILITY.  
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.  
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS  
OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND  
NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.  
Application Considerations  
SUITABILITY FOR USE  
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the  
customer’s application or use of the product.  
At the customer’s request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply  
to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end  
product, machine, system, or other application or use.  
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all  
possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:  
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.  
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,  
safety equipment, and installations subject to separate industry or government regulations.  
• Systems, machines, and equipment that could present a risk to life or property.  
Please know and observe all prohibitions of use applicable to the products.  
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT  
THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED  
AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.  
Disclaimers  
CHANGE IN SPECIFICATIONS  
Product specifications and accessories may be changed at any time based on improvements and other reasons.  
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.  
However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix  
or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual  
specifications of purchased products.  
DIMENSIONS AND WEIGHTS  
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.  
ERRORS AND OMISSIONS  
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,  
typographical, or proofreading errors, or omissions.  
PERFORMANCE DATA  
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may  
represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject  
to the OMRON Warranty and Limitations of Liability.  
PROGRAMMABLE PRODUCTS  
OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.  
Copyright and Copy Permission  
COPYRIGHT AND COPY PERMISSION  
This document shall not be copied for sales or promotions without permission.  
This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or  
reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in  
its entirety.  
OMRON Corporation  
Tokyo, JAPAN  
Industrial Automation Company  
Authorized Distributor:  
Contact: www.ia.omron.com  
Regional Headquarters  
OMRON EUROPE B.V.  
OMRON SCIENTIFIC TECHNOLOGIES INC.  
Wegalaan 67-69-2132 JD Hoofddorp  
The Netherlands  
Tel: (31)2356-81-300/Fax: (31)2356-81-388  
6550 Dumbarton Circle,  
Fremont, CA 94555-3605 U.S.A.  
Tel: (1) 510-608-3400/Fax: (1) 510-744-1442  
© OMRON Corporation 2012 All Rights Reserved.  
In the interest of product improvement,  
specifications are subject to change without notice.  
OMRON (CHINA) CO., LTD.  
Room 2211, Bank of China Tower,  
200 Yin Cheng Zhong Road,  
PuDong New Area, Shanghai, 200120, China  
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200  
OMRON ASIA PACIFIC PTE. LTD.  
No. 438A Alexandra Road # 05-05/08 (Lobby 2),  
Alexandra Technopark,  
Singapore 119967  
Tel: (65) 6835-3011/Fax: (65) 6835-2711  
CSM_5_1_0413  
Cat. No. C146-E1-01  
0512 (0412)  
配单直通车
D4V5H1U2LP1610-7产品参数
型号:D4V5H1U2LP1610-7
是否Rohs认证: 符合
生命周期:Active
包装说明:R-PBCC-N2
Reach Compliance Code:compliant
Factory Lead Time:19 weeks
风险等级:1.76
最大击穿电压:8 V
最小击穿电压:5.5 V
配置:SINGLE
二极管元件材料:SILICON
二极管类型:TRANS VOLTAGE SUPPRESSOR DIODE
JESD-30 代码:R-PBCC-N2
JESD-609代码:e4
元件数量:1
端子数量:2
最高工作温度:150 °C
最低工作温度:-55 °C
封装主体材料:PLASTIC/EPOXY
封装形状:RECTANGULAR
封装形式:CHIP CARRIER
峰值回流温度(摄氏度):NOT SPECIFIED
极性:UNIDIRECTIONAL
最大功率耗散:0.5 W
参考标准:IEC-61000-4-2
最大重复峰值反向电压:4.5 V
表面贴装:YES
技术:AVALANCHE
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:NO LEAD
端子位置:BOTTOM
处于峰值回流温度下的最长时间:NOT SPECIFIED
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!