DF52 Series●0.8mm Pitch, Compact and Robust Wire-to-Board Connectors
■Product Specifications
No. of contacts
28 AWG
30 AWG
32 AWG
2
3 to 5
2.0A
1.5A
1.0A
6 to 10 12 or more
2.5A
2.0A
1.5A
1.5A
1.2A
0.8A
1.2A
1.0A
0.8A
Current
Rating
Operating temperature range : -40 to 85
℃ (Note 1)
Operating humidity range : 20 to 80 % (Note 2)
Ratings
Voltage
Rating
Storage temperature range : -10 to 60°C (Note 3)
AC/DC 100V
Storage humidity range : 40 to 70% (Note 3)
Items
Specifications
Conditions
1.Insulation resistance
2.Withstanding Voltage
3.Contact resistance
Measured at 100V DC
100MΩ min.
No flashover dielectric breakdown
10mΩ max.
300V AC applied for 1 minute.
Measured at a maximum of 20 V DC, 1mA (DC or 1000Hz)
10 cycles in each of three axis at frequency 10-55 Hz,
half amplitude 0.75mm
Acceleration of 490 m/s2,11 ms, 3 directions (semi-
sinusoidal), 3 cycles each
4. Vibration resistance
5. Shock resistance
6. Moisture resistance
No electrical discontinuity for more than 1μs
No electrical discontinuity for more than 1
μs
Contact resistance : 20m max.
Ω
Temperature : 40 2℃ ; humidity : 90 to 95%, for 96 hours
insulation resistance : 100M min.
Contact resistance : 20m max.
insulation resistance : 100M min.
Contact resistance : 20m max.
Ω
(-55℃ for 30 minutes 5 to 35℃ for 2 to 3 minutes 85℃ for
30 minutes 5 to 35℃ for 2 to 3 minutes) in 5 cycles
Mating and Unmating : 20 times
Ω
7. Temperature cycle
8. Mating durability
Ω
Ω
Reflow : according to the Recommended Temperature Profile
Manual soldering : temperature of soldering iron at 350℃ 10℃
for 3 seconds
No dissolution of housing parts that
affect performance.
9. Solder heat resistance
Note 1 : Includes the temperature rise caused by current flow.
Note 2 : Use in environments without condensation.
Note 3 : The term “storage” refers to the long-term storage condition of unused products before PCB mounting.
Operating temperature/humidity range is applied to the deenergized state after mounting of PCB and the temporary storage
state during transportation.
■Materials / Finish
Product
Part
Materials
Polyamide
Copper alloy
Polyamide
Copper alloy
Finish
Black
Tin plating
Black
UL Regulation
UL94V-0
-
Insulator
Contact
Insulator
Contact
Receptacle
Crimping plug
Crimp contact
UL94V-0
Tin plating
-
■Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
●Plug connector
●Receptacle
DF 52 * P 0.8 C
-
-
DF 52 * S 0.8 H
-
-
❶
❷
❸
❹
❺
❻
❶
❷
❸
❹
❺
❻
: DF
: 52
❶Series name
❷Series No.
: DF
: 52
❶Series name
❷Series No.
:
2, 3, 4, 5, 6, 8, 10, 12, 14, 15, 16, 17, 20
❸
Number of contacts
:
2, 3, 4, 5, 6, 8, 10, 12, 14, 15, 16, 17, 20
❸
Number of contacts
P : Crimping plug
: 0.8mm
❹Connector type
❺Contact Pitch
❻Termination style
S : Receptacle
: 0.8mm
❹Connector type
❺Contact Pitch
❻Termination style
C : Crimping plug
H: SMT Right Angle Type
●Crimp contact
DF 52 2832 PCF
-
❶
❷
❸
❹
❶Series name
: DF
❷Series No.
: 52
❸Applicable wire size
: 2832 28 to 32 AWG
❹Method type/Packaging type PCF : Plug crimp contact, reel
2