DF7-7P-3.96DS(01)中文资料应用文章市场行情现货热卖使用介绍-中国IC网-芯三七

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)

DF7 Series

Complete

Locking

Function

Completely

enclosed

locking system

Full barrier

between adjacent

contacts.

Prevention of

Incorrect Connections

ꢀFeatures

1. Complete Locking Function

Reliable interior lock protects mated connectors from

accidental disconnection.

2. Increased Contact Retention of Crimped

Contacts and Prevention of Incomplete

Insertion

Separate contact retainer increases the contact

retention, assures and visually confirms the complete

contact insertion.

3. Molded-in Contact Retention Tabs

Handling of terminated contacts during the assembly and

termination is easier and avoids entangling of wires,

since there are no protruding metal tabs.

4. Incorrect Insertion Prevention

Guide post

Connectors are polarized to assure correct mating with

corresponding parts.

Board Eyelet mounting

5.Solder Crack Prevention

Glass reinforced resin is used in the pin header bodies to

prevent solder cracks caused by the heat shrinkage.

6. Prevention of Incorrect Board Placement

Built-in locating posts assure correct connector

placement and orientation on the board.(2-12 pos.)

7. Supports Sealing after Installation.

Sealing compound can be applied to the board installed

connector for distance of 6 mm max. from the mounting

surface (9 mm max. for single position).

8.Cost Effective Tooling

The same crimping tools are used to terminate socket

and pin contacts.

One pos. type can also be mounted

to boards that have eyelets.

9. Prevention of Short Circuits between

Adjacent Contacts

Each contact is completely surrounded by the insulator

housing, electrically isolating it from adjacent contacts.

Continued.

B95

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

10. 10 A maximum Current

12. Supports Eyelets

Connector can carry current of 10 A per contact with

#16 AWG conductor.Refer to page 3 for current

ratings for multi-position connectors using other

conductor sizes.

1 pos. can be mounted to boards which have eyelets

attached.

ꢀApplications

11. Color Variations

Office equipment, power supplies for industrial, medical

and instrumentation applications, variety of consumer

electronic and electrical applications.

1 pos. is available in a standard 3 colors: natural,

blue, and red.

Crimp Sockets

ꢀSingle row

ꢀDouble rows

Retainer

(optional, order separately)

Shown with terminated

and installed contacts.

Refer to page 8 for details.

Shown with terminated

and installed contacts.

Refer to page 11 for details.

Header

In-line plug

Refer to page 10 for details.

ꢀSingle row, straight type

ꢀDouble rows, straight type

ꢀPanel lock type

Shown with

terminated and installed contacts.

Refer to page 6 for details.

Refer to page 4 for details. Refer to page 10 for details.

Single row, right angle type Double row, right angle type

ꢀ

Shown with

terminated and installed contacts.

Refer to page 7 for details.

Refer to page 5 for details. Refer to page 10 for details.

ꢀOrdering information

ꢀ

Socket, Header

Series name: DF7, DF7A

Applicable Conductor

1

2

3

6

7

Number of contacts: 1 to 12

Connector type

1618: AWG 16 to AWG 18

2022: AWG 20 to AWG 22

2426: AWG 24 to AWG 26

Packaging

DF7 -

S - 3.96 C

*

2

S: Socket

1

3

4

5

DS: Double-row socket

P: Header

SCF: Socket contacts / Reel

SC: Socket contacts / Bag

PCF: Plug contacts / Reel

PC: Plug contacts / Bag

DP: Double-row Header

EP: In-line plug

ꢀContacts

RS/P: Retainer

DF7 -

SCF

**

6

Contact pitch: 3.96mm(7.92 mm)

Type of housing: header

C: Crimp housing

4

5

1

7

DSA: Straight header

DS: Right-angle header

Blank: Retainer

B96

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀProduct Specifications

Row

No. of contacts

AWG16

10A

9A

AWG18

7A

AWG20

5A

AWG22

4A

1

1~10

Operating temperature range -35ç to 85ç (Note 1)

Operating humidity range

4

6

9A

7A

6A

20% to 80%

Current

rating

8A

6A

5A

2

8

9A

8A

6A

5A

Storage temperature range -10çto 60ç (Note 2)

Storage humidity range 40% to 70% (Note 2)

Ratings

10

12

8A

7A

5A

4A

8A

7A

5A

4A

AC 630V

AC 600V

UL/C-UL/TÜV File No.and Recognition No

Specificatoin

UL/C-UL

UL

:E52653

Voltage

rating

AC 600V(7.92mm pitch)

AC 300V (3.96mm pitch)

C-UL

TÜV

:E52653

TÜV

:R9750437

Item

Specification

Condition

11. Contact resistance Contact resistance(Initial value)

12. Insulator resistance 1000 M ohms min.

10 m ohms max. 20mV max., 1mA

500 V DC

13. Withstanding voltage No flashover or Insulator breakdown

1500 V AC for 1 minute

14. Insertion-Extraction force

0.3N min., 4.5N max.

(per contact)

Measured with a steel pin of 0.64 x 1.2 0.002 mm

Contact resistance of 20 m ohms max.

15. Durability

30 cycles

(mating/unmating)

Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, 2

hours

16. Vibration

No momentary disconnections of 1 µs min.

2

Acceleration of 490 m/s , 11 ms duration, sine half-wave

17. Shock

No electrical discontinuity of 1 µs. min.

Contact resistance 20 m ohms max.

waveform, 3 cycles in each of the 3 axis.

18. Humidity

Temperature 40ç 2ç, 90% to 95% RH, 96 hours

(-55ç: 30 minutes ꢀ 5 to 35ç: 5 minutes ꢀ 85ç: 30 minutes ꢀ 5

to 35ç: 5 minutes) for 5 cycles

19. Temperature cycle Contact resistance of 20 m ohms max.

10. Resistance to

soldering heat

No deformation of the insulator parts affecting

performance

Flow solder temperature 250ç, 10 seconds

Manual soldering: Soldering iron temperature 300ç, 3 seconds

Note 1: Includes temperature rise caused by the current flow.

Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range

and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.

ꢀMaterials

Product

Part

Material

Polyamide

Finish

Color: White

Remarks

Sockets

Insulator

UL94V-0

Polyamide

Color: Beige (Single row)

Color: Grey (Double row)

Tin plating (Note)

Color: White

Insulator

UL94V-0

Headers

(Glass reinforced)

High conductivity copper alloy

Polyamide

Contact

Insulator

Contacts

----------------

UL94V-0

----------------

In-line plug

Retainer

Polyamide

Color: Black

Crimp contacts

High conductivity copper alloy

Tin plating (Note)

Note: Hirose Electric's plating incorporates anti-whisking compounds.

B97

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ Straight header

Part Number

CL No.

Number of contacts

A

B

DF7- 1P-3.96DSA

DF7- 2P-3.96DSA

DF7- 3P-3.96DSA

DF7- 4P-3.96DSA

DF7- 5P-3.96DSA

DF7- 6P-3.96DSA

DF7- 7P-3.96DSA

DF7- 8P-3.96DSA

DF7- 9P-3.96DSA

DF7-10P-3.96DSA

DF7- 2P-7.92DSA

DF7- 3P-7.92DSA

DF7- 4P-7.92DSA

DF7- 5P-7.92DSA

CL680-0133-1

CL680-0036-5

CL680-0037-8

CL680-0038-0

CL680-0039-3

CL680-0040-2

CL680-0041-5

CL680-0042-8

CL680-0043-0

CL680-0044-3

CL680-0108-4

CL680-0109-7

CL680-0110-6

CL680-0111-9

1

2

-------------

10.40

14.36

18.32

22.28

26.24

30.20

34.16

38.12

42.08

14.36

22.28

30.20

38.12

-------------

3.96

3

7.92

4

11.88

15.84

19.80

23.76

27.72

31.68

35.64

7.92

5

6

7

8

9

1 Pos.

10

2

3

15.84

23.76

31.68

4

5

Note 1) Bag packaging (100 pieces/bag). Order by number of bags.

Note 2) The 2 pos. type does not have walls on both sides.

Note 3) DF7-2P-7.92DSA plug has #2 contact positions of DF7-3P-3.96DSA without contacts inserted and the number of pos. indication is 2.

(Mating receptacle: DF7#-3S-3-96C)

DF7-3P-7.92DSA plug has #2 and #4 contact positions of DF7-5P-3.96DSA without contacts inserted and the number of pos. indication is 3.

(Mating receptacle: DF7#-5S-3-96C)

DF7-4P-7.92DSA plug has #2, #4 and #6 contact of DF7-7P-3.96DSA without contacts inserted and the number of pos. indication is 4.

(Mating receptacle: DF7#-7S-3-96C)

DF7-5P-7.92DSA plug has #2, #4, #6 and #8 contact positions of DF7-9P-3.96DSA without contacts inserted and the number of pos. indication is 5.

(Mating receptacle: DF7#-9S-3-96C)

2 to 10 Pos.

A

1 Pos.

2 to 10 Pos.

B

No. of contacts

indicator (Note3)

7.8

P=3.96

6.44

1 0

1

(Note1)

(Note2)

9E26

0.84

Production Lot No.

M0.64

Cavity No.

A

Cavity No.

2.49

Ø1.4

6 L 0 9

Production Lot No.

B PCB mounting pattern (Board thickness: 1.6 0.1)

Eyelet

Ø3.9 MAX

1 Pos.

Board

2 to 10 Pos.

Soldering side

Ø5 MAX

Note 5: One pos. type can also be mounted to boards

that have installed eyelets.

8

0.1

+0.1

_0.3

5.4

P=3.96 0.05(7.92 0.05)

0.1

^+0.15for eyelet

Ø1.6 _{_0.25}

B

2.49 0.05

+0.1

_0

1.4

mm Without eyelet

B98

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ Right angle header

A

P=3.96

(Note1)

6L09

A

10

Production Lot No.

Cavity No.

3.5

No. of contacts indicator (Note2)

B

1.1

9.5

10

A

Ø1.4

1.4

C

Part Number

CL No.

Number of contacts

A

B

C

Quantity per tray

DF7- 2P-3.96DS(24)

DF7- 3P-3.96DS(24)

DF7- 4P-3.96DS(24)

DF7- 5P-3.96DS(24)

DF7- 6P-3.96DS(24)

DF7- 7P-3.96DS(24)

DF7- 8P-3.96DS(24)

DF7- 9P-3.96DS(24)

DF7-10P-3.96DS(24)

DF7- 2P-7.92DS(24)

DF7- 3P-7.92DS(24)

DF7- 4P-7.92DS(24)

DF7- 5P-7.92DS(24)

CL680-0081-0-24

CL680-0082-2-24

CL680-0083-5-24

CL680-0084-8-24

CL680-0085-0-24

CL680-0086-3-24

CL680-0087-6-24

CL680-0088-9-24

CL680-0089-1-24

CL680-0124-0-24

CL680-0125-3-24

CL680-0126-6-24

CL680-0127-9-24

2

3

3.96

7.92

10.40

14.36

18.32

22.28

26.24

30.20

34.16

38.12

42.08

14.36

22.28

30.20

38.12

8.40

114

84

66

60

48

42

36

30

84

60

42

36

12.36

16.32

20.28

24.24

28.20

32.16

36.12

40.08

12.36

20.28

28.20

36.12

4

11.88

15.84

19.80

23.76

27.72

31.68

35.64

7.92

5

6

7

8

9

10

2

3

15.84

23.76

31.68

4

5

Note 1) Tray packaging. Order by number of quantity in the tray.

Note 2) DF7-2P-7.92DS plug has #2 contact positions of DF7-3P-3.96DS without contacts inserted and the number of pos. indication is 2.

(Mating receptacle: DF7#-3S-3-96C)

DF7-3P-7.92DS plug has #2 and #4 contact positions of DF7-5P-3.96DS without contacts inserted and the number of pos. indication is 3.

(Mating receptacle: DF7#-5S-3-96C)

DF7-4P-7.92DS plug has #2, #4 and #6 contact of DF7-7P-3.96DS without contacts inserted and the number of pos. indication is 4.

(Mating receptacle: DF7#-7S-3-96C)

DF7-5P-7.92DS plug has #2, #4, #6 and #8 contact positions of DF7-9P-3.96DS without contacts inserted and the number of pos. indication is 5.

(Mating receptacle: DF7#-9S-3-96C)

B PCB mounting pattern (Board thickness: 1.6 0.1)

P=3.96 0.05(7.92 0.05)

A 0.1

C 0.05

B99

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ In-line plug (Panel lock type)

Part Number

CL No.

Number of contacts

A

B

C

DF7- 1EP-3.96C

DF7- 2EP-3.96C

DF7- 3EP-3.96C

DF7- 4EP-3.96C

DF7- 5EP-3.96C

DF7- 6EP-3.96C

DF7- 7EP-3.96C

DF7- 8EP-3.96C

DF7- 9EP-3.96C

DF7-10EP-3.96C

CL680-0134-4

CL680-0018-3

CL680-0019-6

CL680-0020-5

CL680-0021-8

CL680-0022-0

CL680-0023-3

CL680-0024-6

CL680-0025-9

CL680-0026-1

1

2

6.44

13.96

17.40

21.36

25.32

29.28

33.24

37.20

41.16

45.12

49.08

-------------

3.96

10.40

14.36

18.32

22.28

26.24

30.20

34.16

38.12

42.08

7.92

3

11.88

15.84

19.80

23.76

27.72

31.68

35.64

4

5

Shown with terminated

and installed contacts.

1 Pos.

6

7

8

9

10

Note1: Bag packaging (100 pieces/bag). Order by number of bags.

Note2: Refer to page 10 for retainer.

Shown with terminated

and installed contacts.

2 to 10 Pos.

1 Pos.

2 to 10 Pos.

3

A

B

3

12.44

6.44

P=3.96

9.5

No. of contacts

indicator

A 1

Cavity No.

B

10

Cavity No.

No. of contacts indicator

Contact No.1

indicator

A 1

13.96

C

B Panel Cutout

1 Pos.

2 to 10 Pos.

(11.32+X)^+0.1

0

6.84^+0.1

0

(C-Y)^+0.1

0

(A+0.4)^+0.1

0

10 0.2

X

Y

2.0

1.6

1.2

0.8

1.44

0.96

0.48

0

0.88

0.96

1.44

1.92

B100

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ In-line Plug

Shown with terminated

and installed contacts.

Shown with terminated

and installed contacts.

1 Pos.

2 to 10 Pos.

1 Pos.

2 to 10 Pos.

6.44

A

B

P=3.96

(Note2)

9.5

No. of contacts

indicator

A

1

Cavity No.

10

B

Cavity No.

No. of contacts indicator

Contact No.1

indicator

A

1

Part Number

CL No.

Number of contacts

A

B

DF7A- 1EP-3.96C

DF7A- 2EP-3.96C

DF7A- 3EP-3.96C

DF7A- 4EP-3.96C

DF7A- 5EP-3.96C

DF7A- 6EP-3.96C

DF7A- 7EP-3.96C

DF7A- 8EP-3.96C

DF7A- 9EP-3.96C

DF7A-10EP-3.96C

CL680-0135-7

CL680-0072-9

CL680-0073-1

CL680-0074-4

CL680-0075-7

CL680-0076-0

CL680-0077-2

CL680-0078-5

CL680-0079-8

CL680-0080-7

1

2

6.44

10.40

14.36

18.32

22.28

26.24

30.20

34.16

38.12

42.08

-------------

3.96

3

7.92

4

11.88

15.84

19.80

23.76

27.72

31.68

35.64

5

6

7

8

9

10

Note1: Bag packaging (100 pieces/bag). Order by number of bags.

Note2: Refer to page 10 for retainer.

B101

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ Crimp Sockets

Shown with terminated

and installed contacts.

Shown with terminated

and installed contacts.

1 Pos.

2 to 10 Pos.

1 Pos.

2 to 10 Pos.

A

B

5.5

P=3.96

1

Contact No.1 indicator

(Note 3)

Cavity No.

No. of contacts indicator

Cavity No.

A

1

2

3

4

5

6

7

8

9

10

B

No. of contacts indicator

Part Number

CL No.

Number of contacts

A

B

DF7- 1S-3.96C

DF7- 2S-3.96C

DF7- 3S-3.96C

DF7- 4S-3.96C

DF7- 5S-3.96C

DF7- 6S-3.96C

DF7- 7S-3.96C

DF7- 8S-3.96C

DF7- 9S-3.96C

DF7-10S-3.96C

CL680-0132-9

CL680-0009-2

CL680-0010-1

CL680-0011-4

CL680-0012-7

CL680-0013-0

CL680-0014-2

CL680-0015-5

CL680-0016-8

CL680-0017-0

1

2

5.50

-------------

3.96

10.00

13.96

17.92

21.88

25.84

29.80

33.76

37.72

41.68

3

7.92

4

11.88

15.84

19.80

23.76

27.72

31.68

35.64

5

6

7

8

9

10

Note1: Bag packaging (100 pieces/bag). Order by number of bags.

Note2: Refer to page 10 for retainer.

B102

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ Retainer

1 Pos.

2 to 10 Pos.

1 Pos.

2 to 10 Pos.

A

B

3

P=3.96

6.6

2.2

1

B

Cavity No.

B

10

No. of contacts indicator

Cavity No.

No. of contacts indicator

Part Number

CL No.

Number of contacts

A

B

DF7- 1RS/P-3.96

DF7- 2RS/P-3.96

DF7- 3RS/P-3.96

DF7- 4RS/P-3.96

DF7- 5RS/P-3.96

DF7- 6RS/P-3.96

DF7- 7RS/P-3.96

DF7- 8RS/P-3.96

DF7- 9RS/P-3.96

DF7-10RS/P-3.96

CL680-0136-0

CL680-0027-4

CL680-0028-7

CL680-0029-0

CL680-0030-9

CL680-0031-1

CL680-0032-4

CL680-0033-7

CL680-0034-0

CL680-0035-2

1

2

-------------

10.00

13.96

17.92

21.88

25.84

29.80

33.76

37.72

41.68

-------------

3.96

3

7.92

4

11.88

15.84

19.80

23.76

27.72

31.68

35.64

5

6

7

8

9

10

Note1: Bag packaging (100 pieces/bag). Order by number of bags.

Note2: Retainer is common to sockets, in-line plug.

B103

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

A

B

ꢀ Double-row Straight Header

No. of

contacts

Cavity No.

P=3.96

indicator

10

A

1.26

Contact No.1

indicator

M0.64

Part Number

CL No.

Number of contacts

A

B

Quantity per tray

132

96

B

PCB mounting pattern

(Board thickness: 1.6 0.1)

DF7- 4DP-3.96DSA(24) CL680-0145-0-24

DF7- 6DP-3.96DSA(24) CL680-0146-3-24

DF7- 8DP-3.96DSA(24) CL680-0147-6-24

DF7-10DP-3.96DSA(24) CL680-0148-9-24

DF7-12DP-3.96DSA(24) CL680-0149-1-24

4

6

10.40

14.36

3.96

7.92

2.22

B

0.1

1.4

P=3.96 0.05

8

18.32 11.88

22.28 15.84

26.24 19.80

72

10

12

60

54

Note: Tray packaging. Order by number of trays quantity.

Contact No.1

2.22 0.05

A

B

C

ꢀ Double-row Right angle Header

P=3.96

2.2

Contact No.1 indicator

3.5

No. of

contacts

indicator

Cavity No.

A

Part Number

CL No.

Number of contacts

A

B

C

Quantity per tray

B

PCB mounting pattern

DF7- 4DP-3.96DS(24) CL680-0150-0-24

DF7- 6DP-3.96DS(24) CL680-0151-3-24

DF7- 8DP-3.96DS(24) CL680-0152-6-24

DF7-10DP-3.96DS(24) CL680-0153-9-24

DF7-12DP-3.96DS(24) CL680-0154-1-24

4

6

10.40 8.40 3.96

14.36 12.36 7.92

18.32 16.32 11.88

22.28 20.28 15.84

26.24 24.24 19.80

88

64

48

40

36

(Board thickness: 1.6 0.1)

B

C

0.1

8

3.96 0.05

10

12

Note: Tray packaging. Order by number of trays quantity.

Contact No.1

B104

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ Double-row Socket

A

B

P=3.96

(16)

(17.2)

Contact No.1

Enhanced ergonomic lock

Standard Lock

9

1

2

A

10

No. of contacts indicator

Cavity No.

ꢀꢀStandard lock

Part Number

ꢀꢀEnhanced ergonomic lock

CL No.

Number of contacts

A

B

Part Number

CL No.

Number of contacts

A

B

DF7-4DS-3.96C

DF7-6DS-3.96C

DF7-8DS-3.96C

DF7-10DS-3.96C

DF7-12DS-3.96C

4

6

10.00

13.96

17.92

21.88

25.84

3.96

DF7A-4DS-3.96C

DF7A-6DS-3.96C

DF7A-8DS-3.96C

DF7A-10DS-3.96C

DF7A-12DS-3.96C

CL680-0160-4

CL680-0161-7

CL680-0162-0

CL680-0163-2

CL680-0164-5

4

6

10.00

13.96

17.92

21.88

25.84

3.96

Reserved For

product

7.92

8

11.88

15.84

19.80

8

11.88

15.84

19.80

expansion

10

12

10

12

Note: Bag packaging (100 pieces/bag). Order by number of bags.

B105

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ Crimp Contact

ꢀꢀFemale Contact

ꢀꢀMale Contact

2.4

2.35

2.5

1.3

0.64

AWG No.

16

18

AWG No.

16

18

0.8

P=11

t=0.25

P=11

t=0.25

Part Number

CL No.

Packaging

Quantity

Finish

CL680-0001-0

CL680-0002-3

CL680-0003-6

CL680-0004-9

CL680-0005-1

CL680-0006-4

CL680-0007-7

CL680-0008-0

Reel

Bag

Reel

Bag

Reel

Bag

Reel

Bag

3,000

100

3,000

100

3,000

100

3,000

100

DF7-1618SCF

DF7-1618SC

DF7-2022SCF

DF7-2022SC

DF7-1618PCF

DF7-1618PC

DF7-2022PCF

DF7-2022PC

Tin plating

ꢀꢀApplicable cable (Tin plated annealed copper wire)

Jacket diameter

Wire size(Stranded wire conductor)

UL style

AWG#16(26/0.254mm)

AWG#18(34/0.18mm)

AWG#20(21/0.18mm)

AWG#22(17/0.16mm)

AWG#16(26/0.254mm)

AWG#18(34/0.18mm)

AWG#20(21/0.18mm)

AWG#22(17/0.16mm)

2.1 to 2.5mm

UL1007

1.6 to 1.9mm

2.9 to 3.2mm

2.4 to 2.7mm

UL1015

Note 1: Applicable wire with tin plated solid soft conductor.

Note 2: When using other than the recommended wire, contact your nearest Hirose representative.

Note 3: Strip length: 3.0 to 3.8mm.

ꢀ Tools

Type

Press unit

Part Number

CL No.

Applicable Contacts

CM-105

CL901-0005-4

CL901-4554-4

CL901-4553-1

CL550-0268-0

CL550-0269-3

----------------

Automatic

Manual

AP105-DF7-1618

AP105-DF7-2022

HT104/DF7-1618

HT104/DF7-2022

DF7-1618SCF/DF7-1618PCF

DF7-2022SCF/DF7-2022PCF

DF7-1618SC/DF7-1618PC

DF7-2022SC/DF7-2022PC

Applicator

Crimp tools

B106

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B Mating Dimensions

ꢀꢀSocket to Straight Header Connection

DF7-*S-3.96C

1 pos. 2 to 12 pos.

A

B

C

18.5

09.0

20.3

20.0

08.5

21.5

DF7_*S_3.96C

DF7_*RS/P_3.96

DF7_*P_3.96DSA

ꢀꢀSocket to Straight Header Connection (Double-row)

(17.7)

(16.5)

DF7_*DS_3.96C

DF7A_*DS_3.96C

DF7_*DP_3.96DSA(24)

DF7_*DS_3.96DSA(24)

ꢀꢀSocket to Right angle Header Connection

DF7_*S_3.96C

26.6

25.1

DF7_*P_3.96DS

DF7_*RS/P_3.96

ꢀꢀSocket to Right angle Header Connection (Double-row)

DF7A_*DS_3.96C

(28.1)

DF7_*DS_3.96C

(28.1)

DF7_*DP_3.96DS(24)

B107

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀꢀSocket to In-line Plug (Panel mount type) Connection

D

E

DF7_*S_3.96C

DF7_*EP_3.96C

1 pos.

35.1

2 to 12 pos.

37.0

D

E

DF7_*RS/P_3.96

32.1

34.0

ꢀꢀ Socket to In-line Plug Connection

F

DF7A_*EP_3.96C

G

DF7_*S_3.96C

1 pos.

2 to 12 pos.

37.0

F

35.1

32.1

DF7_*RS/P_3.96

G

34.0

B108

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B Contact Extraction Procedure

ꢀꢀContact extraction tool: Flat-bladed screwdriver, 1.4 mm blade width

ꢀꢀUse with crimp Contacts: DF7-1618SC(F), DF7-2022SC(F),

DF7-1618PC(F), DF7-2022PC(F)

ꢀꢀWork Method

Housing Cross-Section

1. Refer to the drawing No. 1. Insert

Flat-bladed screwdriver

correct size screwdriver in the

insulator against the molded-in

lance. Deflect the lance as shown.

Molded-in lance

Pull-out direction

2. Assure that the lance is deflected

to release the contact and pull- out

wire with the terminated contact.

B General Use Precautions

ꢀꢀMake sure that the lock is fully depressed before un-mating the connectors.

ꢀꢀUse correct size of the wires. Do NOT forcefully twist or deform wires, as this may affect the crimped

contact connection.

ꢀꢀWhen the potting process is to be performed, please take into consideration the surface tension of

the resin when filling.

B109

型号:	DF7-7P-3.96DS(01)
是否Rohs认证：	不符合
生命周期：	Obsolete
Reach Compliance Code：	unknown
风险等级：	5.91
板上安装选件：	PEG
主体宽度：	0.413 inch
主体深度：	0.709 inch
主体长度：	1.276 inch
连接器类型：	BOARD CONNECTOR
触点排列：	S0P7
联系完成终止：	TIN
触点性别：	MALE
触点材料：	COPPER ALLOY
触点电阻：	10 m Ω
触点样式：	SQ PIN-SKT
介电耐压：	1500VAC V
耐用性：	30 Cycles
最大插入力：	4.448 N
绝缘电阻：	1000000000 Ω
绝缘体颜色：	BEIGE
绝缘体材料：	GLASS FILLED POLYAMIDE
制造商序列号：	DF7
混合触点：	YES
安装选项1：	LOCKING
安装方式：	RIGHT ANGLE
安装类型：	BOARD
连接器数：	ONE
最高工作温度：	85 °C
最低工作温度：	-35 °C
参考标准：	UL,TUV
可靠性：	COMMERCIAL
子类别：	Headers and Edge Type Connectors
端子长度：	0.138 inch
端接类型：	SOLDER
触点总数：	7
撤离力-最小值：	.29746 N
Base Number Matches：	1

电子百科

产品导航

产品型号DF7-7P-3.96DS(01)的Datasheet PDF文件预览

DF7-7P-3.96DS(01)相关产品

DF7-7P-3.96DS(01)相关文章

IC37:专业IC行业平台