Aluminum Electrolytic Capacitors/ HA
Snap-in Type
Country of Origin
Series:
Japan
Malaysia
U.S.A (ii)
Type :
HA
TS
n Features
Endurance: 105°C 2000 h
Length 20 mm
RoHS directive compliant
(ii) Regarding USA product,
Please check PEDCA's
Catalog.
n Recommended Applications
Smoothing circuits, AC adaptor
n Specifications
Category temp. range
-40 to + 105°C
160 to 250 V .DC
68 to 470 µ F
-25 to + 105°C
315 to 400 V .DC
33 to 120 µ F
-40 to + 105°C
10 to 100 V .DC
330 to 68000 µ F
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
±20 % (120Hz/+20°C)
(µA) max. after 5 minutes application of rated working voltage at +20°C.
C:Capacitance(µF) V: W.V. (V.DC)
3√CV
DC Leakage Current
Please see the attached standard products list
tan δ
Frequency (Hz)
50
60
100
0.99
0.95
120
500
1k
10k to
1.15
Frequency Correction
Factor for Ripple Current
0.93
0.75
0.95
0.80
1.00
1.05
1.08
10 to 100V
160 to 400V
1.00
1.20
1.25
1.40
After 2000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +105°C, the capacitor shall meet the following limits.
Endurance
Shelf Life
Capacitance change
tan δ
DC leakage current
±20 % of initial measured value
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
n Dimensions in mm (not to scale)
(10.0) 2-φ2.0±0.1
10.0±0.1
Polarity bar
PET Sleeve
Vent
L+2.0 max
Recommended PWB piercing plan
4.0 ±0.5
+0.2
0.8-0.1
Terminal
(t=0.8)
2.0max
Bottom of can
1.5 ±0.2
Standard terminal type does not require
terminal trimming process.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar.2006
EE148