欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
  •  
  • 北京元坤伟业科技有限公司

         该会员已使用本站17年以上

  • FTSH-106-02-L-DV-ES
  • 数量-
  • 厂家-
  • 封装-
  • 批号-
  • -
  • QQ:857273081QQ:857273081 复制
    QQ:1594462451QQ:1594462451 复制
  • 010-62104931、62106431、62104891、62104791 QQ:857273081QQ:1594462451
更多

对不起,未查询到“FTSH-106-02-L-DV-ES”产品信息。
您可咨询上面配单直通车帮您一起找

建议您:

1、缩短查询关键词重新搜索;

2、你可以发布采购信息,让供应商主动联系您;

3、联系我站客服,帮助您查询产品信息,在线客服QQ:1372232724


返回首页快速发布采购

产品型号FTSH-106-02-L-DV-ES的Datasheet PDF文件预览

NOTES:  
FTSH-1XX-XX-XXX-DV-XXX-XXX  
C
REVISION FQ 1.  
REPRESENTS A CRITICAL DIMENSION.  
OPTIONS  
2. PARTS MAY BE CUT TO POSITION.  
No OF POSITIONS  
-02 THRU -50  
(PER ROW)  
3. MAXIMUM CUT FLASH: .015[0.38], LOOSE FLASH MUST BE REMOVED.  
-P: PICK & PLACE PAD (4 POS MIN)  
(SEE FIG 11, SHT 4 & TABLE 5)  
4. MINIMUM PUSHOUT FORCE: 1.0 LB.  
5. MEASURED AT BEND RADIUS, NOT AT END OF PIN.  
6. TUBE ONLY -04 THROUGH -50 POSITIONS (SEE TABLE 2).  
7. SHEAR TAILS TO DIMENSION SHOWN.  
DO NOT  
SCALE FROM  
THIS PRINT  
-TR: TAPE & REEL PACKAGING (SEE NOTE 18)  
(NOT AVAILABLE WITH -EJC, -EC & -EPC. SEE NOTE 11)  
-FR: FULL REEL QTY. TAPE AND REEL (SEE NOTE17)  
-ES: END SHROUDS (SEE FIG 6, SHT 3)  
LEAD STYLE  
-01: .120 [3.05]  
8. MAXIMUM BURR ALLOWANCE: .003 [0.08]  
-02: .075 [1.91]  
9. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL.  
10. FILL WITH ALIGNMENT PIN HOLES TO TAIL SIDE.  
11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, LOCKING CLIPS  
ARE NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS  
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH LOCKING CLIPS.  
12. VOIDS MAY OR MAY NOT BE PRESENT ON POSITIONS 5 THRU 8 AND CAN  
BE MIXED WITHIN AN ORDER.  
(MOLDED IN 5 POS MIN; -02 & -03 LEAD STYLE ONLY)  
(SNAP SHROUDS 9 POS MIN; -02 & -03 LEAD STYLE ONLY)  
-EJ: EJECTOR SHROUDS: SEE FIG 4, SHT 2)  
-03: .065 [1.65]  
-04: .150 [3.81]  
-05 .170 [4.32]  
(10 POS MIN; -01 LEAD STYLE ONLY)  
-14: .150 [3.81](NOT AVAILABLE  
WITH -SM, FM, LM PLATING  
OPTIONS)  
-EJM: EJECTOR SHROUDS WITH MOLDED ALIGNMENT PIN  
(SEE FIG 5, SHT 2; 10 POS MIN; -01 LEAD STYLE ONLY)  
(NOT VALID WITH -A OPTION)  
-EJC: EJECTOR SHROUDS WITH LOCKING CLIP  
(SEE FIG 5, SHT 2 & NOTE 11)  
(10 POS MIN; -01 LEAD STYLE ONLY; NOT VALID WITH -A OPTION)  
-EC: LOCKING CLIP (SEE FIG 7, SHT 3 & NOTE 11)  
(9 POS MIN; -02 & -03 LEAD STYLE ONLY)  
-EP: GUIDE POST (SEE FIG 8, SHT 3; 9 POS MIN; -02 & -03 LEAD STYLE  
ONLY)(USE ONLY WHEN MATING WITH CLP)  
-EL: BOARD LOCK (SEE FIG 9, SHT 3)  
13. ON LEAD STYLES -02 THROUGH -03 THE T-1S15-18-XXX CAN  
BE SUBSTITUTED FOR T-1S15-16-XXX.  
PLATING SPECIFICATION  
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
14. ON LEAD STYLES -01 AND -04, T-1S15-17 CAN BE  
SUBSTITUTED FOR T-1S15-15-XXX.  
15. NO TIN PLATING ALLOWED ON THE POST FOR  
LEAD STYLES -01, -02, -03 & -04 IN COMBINATION WITH THE  
T-1S15-XX-XXX TERMINAL.  
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
16. MAXIMUM HEIGHT VARIATION .005[0.13] BETWEEN ROWS.  
17. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL,  
BASED ON OPTIONS SELECTED.  
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
(9 POS MIN; -02 & -03 LEAD STYLE ONLY)  
(USE ONLY WHEN MATING WITH CLP)  
-H: 30µ" GOLD IN CONTACT AREA,  
3µ" GOLD ON TAIL  
18. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE  
PACKAGED ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY  
STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM  
-EPC: GUIDE POST & LOCKING CLIP  
(SEE FIG 10, SHT 3 & NOTE 11; USE ONLY WHEN MATING WITH CLP)  
(9 POS MIN; -02 & -03 LEAD STYLE ONLY; NOT VALID  
WITH -A OPTION)  
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
C
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
-A: ALIGNMENT PIN (MOLDED OR STAKED; SEE FIG 3, SHT 2)  
(MOLDED: 3 POS MIN; STAKED: 6 POS MIN)  
(SAMTEC DISCRETION ON WHICH -A PIN USED)  
-K: KEYING OPTION FOR MATING WITH FFSD  
(SEE TABLE 3, SHT 2; 05 THRU 25 AVAILABLE AS STANDARD)  
(POSITION 13, 17, 20 & 25 AVAILABLE WITH -EXX OPTION)  
(LEAD STYLE -01 ONLY, SEE FIG 2, SHT 2 & NOTE 12)  
(ALIGNMENT PIN AVAILABLE WITH -K OPTION BUT MUST BE MOLDED)  
(MUST USE FTSH-50-CN-XX-X OR FTSHC-50-CN-XX-X)  
-M: METAL PICK & PLACE PAD (5 POS MIN; USE MPP-22-5)  
(SEE FIG 12, SHT 4; NOT AVAILABLE WITH -K OPTION)  
POLARIZING OPTION  
No OF POS x .0500+.005  
[
]
+0.13  
-.014 -0.36  
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,  
MATTE TIN ON TAIL  
(No OF POS x .0500[1.27]) - .050[1.27]  
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,  
TIN/LEAD (90/10+/-5%) TAIL  
02  
50  
-G: 10µ" GOLD IN CONTACT AREA,  
3µ" GOLD ON TAIL  
*
-STL: 30µ" SELECTIVE GOLD IN CONACT AREA,  
TIN/LEAD (90/10 +/-5%) ON TAIL  
.135 3.43  
REF  
XXX INDICATES POSITION TO BE OMITTED  
TAIL OPTION  
-DV: DOUBLE VERTICAL  
(NOT AVAILABLE WITH EXX OPTIONS)  
(ONLY AVAILABLE WITH -F, -FM, -L, -LM PLATING OPTIONS)  
49  
* = NOT ENGINEERING APPROVED  
01  
2
MAX SWAY  
C
FTSH-50-D  
(EITHER DIRECTION)  
.050±.008 1.27±0.20  
.016 0.41 SQ  
REF (TYP)  
2
MAX SWAY  
(EITHER DIRECTION)  
2
MAX SWAY  
(EITHER DIRECTION)  
SEE TABLE 1  
"B"  
C
C
90°±3°  
"A"  
CONTACT AREA  
(SEE NOTE 9 & TABLE 1)  
(SEE NOTE 16)  
+.005  
-.003  
+0.13  
2.92  
-0.08  
.099 2.51  
REF  
.115  
(SEE NOTE 5)  
SEE NOTE 3  
(2 PLCS)  
SEE TABLE 6  
.230 5.84 REF  
.23 5.8  
(SEE NOTE 7)  
FIG 1  
SEE NOTE 8  
PATENT NUMBERS  
HAND FILL USING T-1S40  
5713755 / 5961339  
FTSH-1XX-XX-XXX-DV SHOWN  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
PROPRIETARY INFORMATION AND ALL DESIGN,  
*
*
UNLESS OTHERWISE SPECIFIED,  
DIMENSIONS ARE IN INCHES.  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
TOLERANCES ARE:  
DECIMALS  
ANGLES  
1
.XX: .01 [.3]  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
.XXX: .005 [.13]  
PHONE: 812-944-6733  
e-Mail info@SAMTEC.com  
DESCRIPTION:  
FAX: 812-948-5047  
.XXXX: .0010 [.025]  
code 55322  
SHEET SCALE: 5:1  
MATERIAL:  
DO NOT SCALE DRAWING  
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP  
INSULATOR: LCP UL 94 VO  
TERMINAL: PHOSPHOR BRONZE  
DWG. NO.  
* = SEE NOTE 13  
*** = SEE NOTE 14  
FTSH-1XX-XX-XXX-DV-XXX-XXX  
10/12/1995 SHEET 1 OF  
BY: PURVIS  
5
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW  
USE SUB-FTSH-EJEHA  
(2 REQ'D PER ASSEMBLY, EACH  
USES 1 EHA-02 & 1 FTSH-EJ)  
REVISION FQ  
.222 5.65  
REF  
+.005  
-.014  
+0.13  
]
-0.36  
(No OF POS x .0500[1.270])  
[
02  
01  
.440 11.18  
REF  
.135 3.43  
REF  
(No OF POS x .050[1.27])+.621[15.77]  
C
L
±.010[0.25]  
C
.085 2.16 REF  
.200 5.08 REF  
(No OF POS x .050[1.27])+.772[19.61] REF  
FTSH-50-D  
.126 3.20 REF  
.392 9.96  
REF  
FTSH-50-CN-XX-X  
OR FTSHC-50-CN-XX-X  
SEE NOTE 12  
-EJ OPTION (SHROUDS OPEN)  
FIG 2  
.076 1.93 REF  
-K OPTION  
(LEAD STYLE -01 ONLY)  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
(POSITION 13, 17, 20 & 25 AVAILABLE WITH  
-EXX OPTION)  
FIG 4  
-EJ OPTION  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
(-01 LEAD STYLE ONLY)  
USE SUB-FTSH-EJEHA-A  
(2 REQ'D PER ASSEMBLY, EACH  
USES 1 EHA-02 & 1 FTSH-EJ-A)  
C
L
USE SUB-FTSH-EJEHA  
(2 REQ'D PER ASSEMBLY, EACH  
USES 1 EHA-02 & 1 FTSH-EJ)  
FTSH-50-D  
(SEE NOTE 10)  
C
C
L
L
.034 0.86  
C
SM-A9H  
(No OF POS - 2)  
x .050[1.27]  
NO CLEARANCE  
ALLOWED HERE  
.035 0.89  
REF  
(STAKED ALIGNMENT PINS)  
C
LC-05-TM  
2
MAX SWAY  
.05 1.3  
REF  
(EITHER DIRECTION)  
-EJM  
.035 0.89  
REF  
-EJC  
.010 0.25 REF  
C
L
-EJC  
-EJM  
+.005  
-.000  
.085  
2.16+0.13  
0.00  
FTSH-50-D-XX  
FIG 5  
-EJC & -EJM OPTIONS  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 4)  
(-01 LEAD STYLE ONLY)  
.034 0.86  
.050 1.27 REF  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,  
(No OF POS - 2)  
x .050[1.27]  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
.035 0.89  
REF  
FULL R  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail info@SAMTEC.com code 55322  
DESCRIPTION:  
(MOLDED ALIGNMENT PINS)  
FIG 3  
DO NOT SCALE DRAWING  
SHEET SCALE: 3:1  
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP  
-A OPTION  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
(6 POSITION MINIMUM FOR STAKED ALIGNMENT PINS)  
(3 POSITION MINIMUM FOR MOLDED ALIGNMENT PINS)  
DWG. NO.  
FTSH-1XX-XX-XXX-DV-XXX-XXX  
10/12/1995 SHEET 2 OF  
BY: PURVIS  
5
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW  
(No OF POS x .050[1.27])+.231[5.87]±.008[0.20]  
(No OF POS x .050[1.27])+.156[3.96] REF  
C
REVISION FQ  
.265 6.73 REF  
.032[0.81] REF  
CHAMFER  
.075 1.91 REF  
.120 3.05 REF  
02  
FTSH-EP  
.188 4.78  
REF  
.139 3.53  
REF  
.288 7.32  
REF  
.314 7.96  
01  
C
(No OF POS x .050[1.27])+.101[2.57]±.008[0.20]  
ES-FTSH  
FIG 8  
-EP OPTION  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)  
(USE ONLY WHEN MATING WITH CLP)  
.168 4.27  
REF  
.194 4.91  
(No OF POS x .050[1.27])+.257[6.53] REF  
(No OF POS x .050[1.27])+.153[3.89] REF  
FTSH-EL  
.125 3.18  
REF  
FTSH-50-D  
(SEE NOTE 10)  
(SNAP SHROUDS)  
.293 7.44  
REF  
.319 8.09  
(No OF POS (PER FINISHED ASSEMBLY)  
+2) X .050 [1.27] REF  
02  
(No OF POS x .050[1.27])+.223[5.66] .008[0.20]  
.1750 4.445  
.0960 2.438  
REF  
REF  
FIG 9  
-EL OPTION  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)  
(USE ONLY WHEN MATING WITH CLP)  
01  
FTSH-49-ES-XX-X  
(No OF POS x .050[1.27])+.231[5.87]±.008[0.20]  
(No OF POS x .050[1.27])+.156[3.96] REF  
C
.178 4.51  
REF  
.032[0.81] REF  
CHAMFER  
.075 1.91 REF  
.120 3.05 REF  
.0990 2.515 REF  
FTSH-EP  
(MOLDED SHROUDS)  
.288 7.32  
REF  
.314 7.96  
FIG 6  
-ES OPTION  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
(USE -02 OR -03 LEAD STYLE ONLY)  
(9 POS MIN FOR SNAP SHROUDS)  
(5 POS MIN FOR MOLDED SHROUDS)  
LC-05-TM  
(No OF POS x .050[1.27])+.079[2.01]±.008[.20]  
.055 1.40  
(No OF POS x .050[1.27])+.131[3.32]±.008[0.20]  
FIG 10  
-EPC OPTION  
C
.280 7.11  
REF  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)  
(USE ONLY WHEN MATING WITH CLP)  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
FTSH-EC  
LC-05-TM  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733 FAX: 812-948-5047  
e-Mail info@SAMTEC.com code 55322  
DESCRIPTION:  
.055 1.40  
(No OF POS x .050[1.27])+.079[3.30]±.008[0.20]  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP  
FIG 7  
-EC OPTION  
DWG. NO.  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 6)  
FTSH-1XX-XX-XXX-DV-XXX-XXX  
PURVIS  
10/12/1995 SHEET 3 OF 5  
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW  
BY:  
REVISION FQ  
"M" REF  
.230 5.84  
REF  
.20 5.1  
REF  
.13 3.3 REF  
"P"  
.060 1.52 REF  
.20 5.1  
.065 1.65 REF  
PPP-25-KT  
.16 4.1  
REF  
.13 3.3  
REF  
REF  
PPP-25  
-P  
"M" REF = OVERALL LENGTH  
"P" ={("M" -.200 [5.08]) / 2} .020 [.51]  
FIG 11  
.23 5.8 REF  
-P OPTION  
(DIFFERENT AS SHOWN,  
OTHERWISE SAME AS FIG 1)  
C
L
FTSH-50-CN-XX  
-K-P-TR/FR  
FTSH-50-D  
(DIFFERENT AS SHOWN,  
OTHERWISE SAME AS FIG 2)  
PPP-25-NT  
*MOLDED SHROUD ONLY  
** USE PPP-25-NT WITH -TR  
PACKAGING ONLY  
-P-TR  
(DIFFERENT AS SHOWN,  
OTHERWISE SAME AS FIG 1)  
NOTE: TAPE & REEL ORIENTATION:  
POLARIZATION NOTCH TO THE RIGHT  
"M" REF  
"P"  
.32 8.1  
REF  
.32 8.1  
REF  
PPP-41  
.16 4.1  
REF  
-EJ-P & -EJX -P  
"M" REF = OVERALL LENGTH  
"P" ={("M" -.32 [8.1]) / 2} .020 [.51]  
(DIFFERENT AS SHOWN,  
OTHERWISE SAME AS FIGS 4 & 5)  
"M" REF  
"P"  
TAPE & REEL VIEW  
USER DIRECTION OF UN-REELING  
POCKET NOT DETAILED  
.100 2.55 REF  
.250 6.35  
REF  
MPP-22-5  
FTSH-50-D  
"B"  
PROPRIETARY NOTE  
*
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
PROPRIETARY INFORMATION AND ALL DESIGN,  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
"M" REF = OVERALL LENGTH  
PHONE: 812-944-6733  
e-Mail info@SAMTEC.com  
DESCRIPTION:  
FAX: 812-948-5047  
"P" = {("M" - .250[6.35]) / 2} ± .020[0.51]  
code 55322  
FIG 12  
DO NOT SCALE DRAWING  
SHEET SCALE: 3:1  
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP  
*-M: METAL PICK & PLACE PAD  
DWG. NO.  
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)  
(NOT AVAILABLE WITH -K OPTION)(5 POS MIN)  
* = NOT ENGINEERING APPROVED  
FTSH-1XX-XX-XXX-DV-XXX-XXX  
10/12/1995  
SHEET 4 OF 5  
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW  
BY: PURVIS  
PT-FTSH006-DV-EJC-K-P  
PT-FTSH004-DV-EX-A-P-M  
REVISION FQ  
PT-FTSH002-DV-A-P-M  
PT-FTSH002-DV-A-P-M  
PT-FTSH004-DV-EX-A-P-M  
PT-FTSH002-DV-A-P-M  
-ES, -ES-A  
-ES-P, -ES-A-P  
-DV  
(NONE)  
-A, -A-P  
-DV, -P  
PT-FTSH003-DV-EJC-K  
-EJ, EJX AND -EJ-X  
PT-FTSH007-DV-K-P  
PT-FTSH007-DV-K-P  
-K-P  
-K, -K-A  
(FOR -01 LEAD STYLE ONLY)  
ALL -EJ-K OPTIONS  
FIG 13  
TUBE VIEWS  
"A" - .034 0.864  
"A" - .034 0.864  
"A" - .034 0.864  
"C" REF  
(SEE TABLE 1)  
.125±.010 3.18±0.25  
(SEE NOTE 7)  
.050±.005 1.270±0.127  
IN PROCESS 3  
IN PROCESS 2  
W/O A PINS  
W/O A PINS  
IN PROCESS 1  
W/O A PINS  
"A" -.084[2.134]  
"A" - .084 2.134  
"A" - .084 2.134  
"C" REF  
(SEE TABLE 1)  
PROPRIETARY NOTE  
THIS DOCUMENT CONTAINS CONFIDENTIAL AND  
*
*
PROPRIETARY INFORMATION AND ALL DESIGN,  
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS  
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,  
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE  
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR  
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY  
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS  
WRITTEN CONSENT OF SAMTEC, INC.  
.175±.010 4.445±0.254  
(SEE NOTE 7)  
520 PARK EAST BLVD, NEW ALBANY, IN 47150  
PHONE: 812-944-6733  
e-Mail info@SAMTEC.com  
DESCRIPTION:  
FAX: 812-948-5047  
.100±.005 2.540±0.127  
code 55322  
IN PROCESS 3  
IN PROCESS 1  
DO NOT SCALE DRAWING  
SHEET SCALE: 2:1  
IN PROCESS 2  
.050 x .050 CL DOUBLE VERTICAL SMT TERMINAL STRIP  
WITH A PINS*  
WITH A PINS*  
WITH A PINS*  
DWG. NO.  
* = FOR -01, -04, -05 AND -14 LEAD STYLES ONLY  
FTSH-1XX-XX-XXX-DV-XXX-XXX  
IN-PROCESS VIEWS ARE FOR HANDFILL ONLY  
10/12/1995  
SHEET 5 OF 5  
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DV-XXX-XXX-MKT.SLDDRW  
BY: PURVIS  
配单直通车
FTSH-106-02-SM-MT-TR产品参数
型号:FTSH-106-02-SM-MT-TR
是否无铅: 不含铅
是否Rohs认证: 符合
生命周期:Active
IHS 制造商:SAMTEC INC
Reach Compliance Code:compliant
ECCN代码:EAR99
HTS代码:8536.69.40.40
Factory Lead Time:2 weeks
风险等级:5.78
主体宽度:0.135 inch
主体深度:0.299 inch
主体长度:0.3 inch
连接器类型:BOARD CONNECTOR
联系完成配合:GOLD (30)
联系完成终止:Tin (Sn) - with Nickel (Ni) barrier
触点性别:MALE
触点材料:PHOSPHOR BRONZE
触点模式:RECTANGULAR
触点样式:SQ PIN-SKT
DIN 符合性:NO
滤波功能:NO
IEC 符合性:NO
绝缘体颜色:BLACK
JESD-609代码:e3
MIL 符合性:NO
插接触点节距:0.05 inch
匹配触点行间距:0.05 inch
插接信息:MULTIPLE MATING PARTS AVAILABLE
混合触点:NO
安装方式:RIGHT ANGLE
安装类型:BOARD
连接器数:ONE
PCB行数:2
装载的行数:2
最高工作温度:125 °C
最低工作温度:-55 °C
选件:GENERAL PURPOSE
电镀厚度:30u inch
额定电流(信号):3.4 A
可靠性:COMMERCIAL
子类别:Headers and Edge Type Connectors
端子节距:1.27 mm
端接类型:SOLDER AND SURFACE MOUNT
触点总数:12
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!