GL852G芯片引脚定义引脚图及功能IC贸易商引脚图技术参数-中国IC网-芯三七

035/4

Genesys Logic, Inc.

GL852G

USB 2.0 MTT Hub Controller

Datasheet

Revision 1.32

Mar. 31, 2015

GL852G Datasheet

Copyright

form or by any means without prior written consent of Genesys Logic, Inc.

Ownership and Title

Genesys Logic, Inc. owns and retains of its right, title and interest in and to all materials provided herein.

Genesys Logic, Inc. reserves all rights, including, but not limited to, all patent rights, trademarks, copyrights

and any other propriety rights. No license is granted hereunder.

Disclaimer

All Materials are provided “as is”. Genesys Logic, Inc. makes no warranties, express, implied or otherwise,

regarding their accuracy, merchantability, fitness for any particular purpose, and non-infringement of

intellectual property. In no event shall Genesys Logic, Inc. be liable for any damages, including, without

limitation, any direct, indirect, consequential, or incidental damages. The materials may contain errors or

omissions. Genesys Logic, Inc. may make changes to the materials or to the products described herein at

anytime without notice.

Genesys Logic, Inc.

12F., No. 205, Sec. 3, Beixin Rd., Xindian Dist. 231,

New Taipei City, Taiwan

Tel : (886-2) 8913-1888

Fax : (886-2) 6629-6168

http ://www.genesyslogic.com

GLI Confidential

Page 2

GL852G Datasheet

Revision History

Revision

Date

05/26/2009 First formal release

Description

1.00

1.01

06/18/2009 Add On-chip power regulator spec, Ch6.6, p.28

Update 3.3 pin description,p.14

Update table-6.2 operating ranges, p.24

Update table-6.3 power dissipation, p.25

1.02

09/01/2009

Update Ch8 order information, p.32

1.03

1.04

1.05

10/23/2009 Modify table 5.3 – port number configuration, p.23

11/04/2009 Update Table 6.6 – DC Supply Current, p.26

05/17/2010 Update Table 6.6 – DC Supply Current for GL852G-1x version, p.26

Update Table 5.3 – port number configuration for GL852G-1x version,

1.06

1.07

1.08

06/04/2010

p.24

Add SSOP28 package information, p.8, 9, 12~15, 26

Modify Ch2 features, p.9

Modify 5.2.5 EEPROM Setting, p.24

Modify 6.6 On-Chip Power Regulator, p.31

12/27/2010

Modify SSOP28 pinout, p.12~15

03/22/2011

Update table-6.3 DC characteristics except USB signals, p.27

1.09

1.10

1.20

1.21

1.22

1.23

1.24

1.25

1.26

1.27

1.28

1.29

1.30

1.31

1.32

04/21/2011 Add LQFN 46 package information, p8, 9, 13, 15~17, 26, 27, 37, 38

05/11/2011 Modify SSOP28 package dimension information, p.36

07/15/2011 Update Table 3.3 pin description, RREF I/O type, p.16

07/15/2011 Update Table 3.1, 3.2, 3.3, 3.4, 3.5 RREF I/O type, p.14~16

08/26/2011 Update Table-6.3 DC characteristics except USB signals (R_DN,R_UP), p.29

11/21/2011 Update Table 3.5 Pin Description, p.17

12/22/2011 Updated Table 6.2 Operating Ranges, p.28

01/03/2012 Updated Table 3.5 Pin Descriptions, p.17

05/16/2012 Modified CH8 Ordering Information, p.38

08/31/2012 Updated Table 6.6 - GL852G Power Consumption, p. 30

12/28/2012 Modified Typo, p. 38

05/17/2013 Updated CH1 General Description, p. 8

05/30/2013 Updated CH5.2.8 Non-removable Port Configuration, p. 28

03/03/2014 Updated Reset Timing Information, p. 24, 25

03/31/2015 Removed LQFN46 Package Information.

GLI Confidential

Page 3

GL852G Datasheet

Table of Contents

CHAPTER 1 GENERAL DESCRIPTION ........................................................................ 8

CHAPTER 2 FEATURES.................................................................................................... 9

CHAPTER 3 PIN ASSIGNMENT .................................................................................... 10

3.1 Pinouts ......................................................................................................................... 10

3.2 Pin List......................................................................................................................... 13

3.3 Pin Descriptions.......................................................................................................... 14

CHAPTER 4 BLOCK DIAGRAM ................................................................................... 17

CHAPTER 5 FUNCTION DESCRIPTION..................................................................... 18

5.1 General Description.................................................................................................... 18

5.1.1 USPORT Transceiver......................................................................................... 18

5.1.2 PLL (Phase Lock Loop) ..................................................................................... 18

5.1.3 FRTIMER ........................................................................................................... 18

5.1.4 μC......................................................................................................................... 18

5.1.5 UTMI (USB 2.0 Transceiver Microcell Interface)........................................... 18

5.1.6 USPORT Logic ................................................................................................... 18

5.1.7 SIE (Serial Interface Engine)............................................................................. 18

5.1.8 Control/Status Register...................................................................................... 18

5.1.9 REPEATER ........................................................................................................ 19

5.1.10 TT (Transaction Translator) ........................................................................... 19

5.1.11 REPEATER/TT Routing Logic....................................................................... 19

5.1.12 DSPORT Logic ................................................................................................. 20

5.1.13 DSPORT Transceiver....................................................................................... 20

5.2 Configuration and I/O Settings................................................................................. 21

5.2.1 RESET Setting .................................................................................................... 21

5.2.2 PGANG Setting................................................................................................... 22

5.2.3 SELF/BUS Power Setting .................................................................................. 23

5.2.4 LED Connections................................................................................................ 23

5.2.5 EEPROM Setting................................................................................................ 24

5.2.6 Power Switch Enable Polarity (Only Available for LQFP48 Package)......... 24

5.2.7 Port Number Configuration (Only Available for LQFP48 Package)............ 24

5.2.8 Non-removable Port Configuration (Only Available for LQFP48 Package)....... 25

5.2.9 Reference Clock Configuration (Only Available for LQFP48 Package)....... 25

GLI Confidential

Page 4

GL852G Datasheet

CHAPTER 6 ELECTRICAL CHARACTERISTICS..................................................... 26

6.1 Maximum Ratings ...................................................................................................... 26

6.2 Operating Ranges....................................................................................................... 26

6.3 DC Characteristics ..................................................................................................... 26

6.4 Power Consumption................................................................................................... 27

6.5 AC Characteristics ..................................................................................................... 28

6.5.1 93C46 EEPROM IF............................................................................................ 28

6.5.2 24C02 EEPROM Interface ................................................................................ 29

6.6 On-Chip Power Regulator......................................................................................... 30

CHAPTER 7 PACKAGE DIMENSION .......................................................................... 31

CHAPTER 8 ORDERING INFORMATION .................................................................. 34

GLI Confidential

Page 5

GL852G Datasheet

List of Figures

Figure 3.1 - GL852G 48 Pin LQFP Pinout Diagram .......................................................... 10

Figure 3.2 - GL852G 28 Pin QFN Pinout Diagram............................................................. 11

Figure 3.3 - GL852G SSOP 28 Pin Pinout Diagram........................................................... 12

Figure 4.1 - GL852G Block Diagram (Multiple TT)........................................................... 17

Figure 5.1 - Operating in USB 1.1 Schemes......................................................................... 19

Figure 5.2 - Operating in USB 2.0 Schemes......................................................................... 20

Figure 5.3 - Power on Reset Diagram................................................................................... 21

Figure 5.4 - Power on Sequence of GL852G........................................................................ 21

Figure 5.5 - Timing of PGANG Strapping........................................................................... 22

Figure 5.6 - GANG Mode Setting ......................................................................................... 22

Figure 5.7 - SELF/BUS Power Setting ................................................................................. 23

Figure 5.8 - LED Connection ................................................................................................ 23

Figure 5.9 - Schematics between GL852G and 93C46........................................................ 24

Figure 6.1 - Vin(V5) vs Vout(V33)*...................................................................................... 30

Figure 7.1 - GL852G 48 Pin LQFP Package........................................................................ 31

Figure 7.2 - GL852G 28 Pin QFN Package.......................................................................... 32

Figure 7.3 - GL852G 28 Pin SSOP Package ........................................................................ 33

GLI Confidential

Page 6

GL852G Datasheet

List of Tables

Table 3.1 - GL852G LQFP 48 Pin List................................................................................. 13

Table 3.2 - GL852G QFN 28 Pin List................................................................................... 13

Table 3.3 - GL852G SSOP 28 Pin List ................................................................................. 13

Table 3.5 - Pin Descriptions................................................................................................... 14

Table 5.1 - Reset Timing........................................................................................................ 22

Table 5.2 - Configuration by Power Switch Type ............................................................... 24

Table 5.3 - Port Number Configuration............................................................................... 24

Table 5.4 - Ref. Clock Configuration.................................................................................... 25

Table 6.1 - Maximum Ratings............................................................................................... 26

Table 6.2 - Operating Ranges................................................................................................ 26

Table 6.3 - DC Characteristics except USB Signals ............................................................ 26

Table 6.4 - DC Characteristics of USB Signals under FS/LS Mode.................................. 27

Table 6.5 - DC Characteristics of USB Signals under HS Mode ....................................... 27

Table 6.6 - GL852G power consumption ............................................................................. 27

Table 6.7 - AC Characteristics of EEPROM Interface (93C46)........................................ 28

Table 6.8 - AC Characteristics of EEPROM Interface (24C02)........................................ 29

Table 8.1 - Ordering Information......................................................................................... 34

GLI Confidential

Page 7

GL852G Datasheet

CHAPTER 1 GENERAL DESCRIPTION

GL852G is Genesys Logic’s premium 4-port hub solution which fully complies with Universal Serial Bus

Specification Revision 2.0. GL852G implements multiple TT* (Note1) architecture that provide dedicated

TT* to each downstream (DS) ports, which guarantee Full-Speed(FS) data passing bandwidth when multiple

FS device perform heavy loading operations. The controller inherits Genesys Logic’s cutting edge

technology on cost and power efficient serial interface design. GL852G has proven compatibility, lower power

consumption figure and better cost structure above all USB2.0 hub solutions worldwide.

GL852G implements multiple hub configuration features onto internal mask ROM, which traditionally

requires one external EEPROM. The microprocessor detects general purpose I/O (GPIO) status during the

initial stage to configure hub settings such as (1) number of DSport, (2) declare of compound device (3)

gang/individual mode selection…etc. External EEPROM can be removed if no vendor specified PID/VID or

product string is required for the application.

GL852G supports three package types, summarized as below table. LQFP48 package provides full hub

features such as (1) two-color (green/amber) status LEDs for each DS ports, (2) Individual/Gang mode power

management scheme that indicates DS port over-current events. (3) Number of DS ports setting configured by

GPIO setting (4) non-removable declaration configured by GPIO setting (5) Support both 93C46 and 24C02

EEPROM (6) power switch polarity selections…etc. QFN28/SSOP28 package support only partial hub

features but provide smaller footprint that targets space limited PCB layout environments such as embedded

system or UMPC/MID applications.

Package

Type

# of DS

Ports

Port #

Config.

Non-removable

Declaration

Power Mgmt.

Individual/Gang

Gang

LED Support

Green/Amber

N/A

EEPROM

93C46/ 24C02

24C02

EEPROM/

GPIO

EEPROM/

GPIO

LQFP 48

QFN 28

SSOP 28

4

EEPROM

N/A

24C02

GL852G Package – Feature Summary

*Note 1: TT (transaction translator) is the main traffic control engine in an USB 2.0 hub to handle the

unbalanced traffic speed between the upstream port and the downstream ports.

GLI Confidential

Page 8

GL852G Datasheet

CHAPTER 2 FEATURES



Compliant to USB specification Revision 2.0



4 downstream ports

Upstream port supports both high-speed (HS) and full-speed (FS) traffic

Downstream ports support HS, FS, and low-speed (LS) traffic

1 control pipe (endpoint 0, 64-byte data payload) and 1 interrupt pipe (endpoint 1, 1-byte data payload)

Backward compatible to USB specification Revision 1.1



On-chip 8-bit micro-processor



RISC-like architecture

USB optimized instruction set

Dual cycle instruction execution

Performance: 6 MIPS @ 12MHz

With 64-byte RAM and 9K internal ROM

Support customized PID, VID by reading external EEPROM

Support downstream port configuration by reading external EEPROM



Multiple Transaction translator (MTT)



MTT provides respective TT control logics for each downstream port.

Each downstream port supports two-color status indicator, with automatic and manual modes compliant to

USB specification Revision 2.0



Built-in upstream port 1.5KΩ pull-up and downstream port 15KΩ pull-down resistors

Support both individual and gang modes of power management and over-current detection for

downstream ports



Conform to bus power requirements of USB 2.0 specification

Automatic switching between self-powered and bus-powered modes

Integrate USB 2.0 transceiver

Embedded PLL support external 12 MHz crystal / Oscillator clock input

Optional 27/48 MHz Oscillator clock input (Only available in LQFP48 package)

Support compound-device (non-removable in downstream ports) by I/O pin configuration (Only available

in LQFP48 package)



Number of Downstream port can be configured by GPIO without external EEPROM (Only available in

LQFP48 package)



Built-in 5V to 3.3V regulator

Improve output drivers with slew-rate control for EMI reduction

Internal power-fail detection for ESD recovery

Available package types: 48 pin LQFP, 28 pin QFN and 28 pin SSOP

Applications:



Stand-alone USB hub / USB docking

UMPC/MID, motherboard on-board applications

Consumer electronics built-in hub application

Monitor built-in hub

Embedded systems

Compound device to support USB hub function such as keyboard hub applications

GLI Confidential

Page 9

GL852G Datasheet

CHAPTER 3 PIN ASSIGNMENT

3.1 Pinouts

PSELF

DVDD

37

38

39

40

41

42

43

44

45

46

47

48

24

23

22

21

20

19

18

17

16

15

14

13

AMBER4

GREEN4

DP4

PGANG

OVCUR2#

PWREN2#

OVCUR1#

PWREN1# / SDA

SEL27#

DM4

GND

AVDD

DP3

GL852G

DM3

AVDD

X2

GREEN1/EE_SK

AMBER1/EE_CS

V5

LQFP-48

X1

V33

GND

Figure 3.1 - GL852G 48 Pin LQFP Pinout Diagram

GLI Confidential

Page 10

GL852G Datasheet

22

23

14

13

12

11

AVDD

DP3

PSELF

PGANG

24

25

26

27

28

DM3

X2

OVCUR2#

OVCUR1#

X1

SDA

V5

10

9

GL852G

AVDD

RREF

QFN-28

V33

8

Figure 3.2 - GL852G 28 Pin QFN Pinout Diagram

GLI Confidential

Page 11

GL852G Datasheet

DP1

AVDD

DM2

1

2

28

27 DM1

26 DP0

DP2

3

4

RREF

25 DM0

AVDD

5

24 V33

X1

X2

6

7

23 V5

22 PWREN1#

21 OVCUR1#

8

9

DM3

DP3

GL852G

20

PWREN2#

10

19 OVCUR2#

AVDD

DM4

11

18 PGANG

17 PSELF

SSOP - 28

DP4 12

RESET# 13

16 DVDD

15 GND

TEST/SCL

14

Figure 3.3 - GL852G SSOP 28 Pin Pinout Diagram

GLI Confidential

Page 12

GL852G Datasheet

3.2 Pin List

Table 3.1 - GL852G LQFP 48 Pin List

Pin# Pin Name Type Pin# Pin Name Type Pin#

Pin Name

SEL48#

Type Pin#

Pin Name

PSELF

Type

1

2

AVDD

GND

DM0

DP0

P

13

14

15

16

17

18

19

20

21

22

GND

X1

P

I

25

26

27

28

29

30

31

32

33

34

I

37

38

39

40

41

42

I

P

B

I

RESET#

DVDD

3

B

P

X2

O

P

B

P

B

TEST / SCL

OVCUR4#

PWREN4#

OVCUR3#

PWREN3#

GREEN3

AMBER3

DVDD

B

I

PGANG

4

AVDD

DM3

DP3

OVCUR2#

PWREN2#

OVCUR1#

5

DM1

DP1

O

I

O

I

6

7

AVDD

GND

DM2

DP2

AVDD

GND

DM4

DP4

O

P

43 PWREN1#/ SDA

44 SEL27#

B

I

8

P

9

B

45 GREEN1/EE_SK

46 AMBER1/EE_CS

O

10

GREEN2/

EE_DO

11

12

RREF

A

P

23

GREEN4

O

35

36

O

47

48

V5

I/P

AMBER2/

EE_DI

AVDD

24 AMBER4

V33

O/P

Table 3.2 - GL852G QFN 28 Pin List

Pin# Pin Name Type Pin# Pin Name Type Pin# Pin Name Type Pin# Pin Name Type

1

2

3

4

5

6

7

DM0

DP0

B

P

8

RREF

AVDD

X1

A

P

I

15

16

17

DM4

DP4

B

22

23

PSELF

I_5V

B

9

PGANG

DM1

DP1

10

11

12

13

14

RESET# I_5V 24 OVCUR2# I_5V

X2

I

18 TEST/SCL I/B 25 OVCUR1# I_5V

AVDD

DM2

DP2

DM3

DP3

B

P

19 OVCUR4# I_5V 26

20 OVCUR3# I_5V 27

SDA

V5

O

B

I/P

AVDD

21

DVDD

P

28

V33

O/P

Table 3.3 - GL852G SSOP 28 Pin List

Pin# Pin Name Type Pin# Pin Name Type Pin# Pin Name Type Pin# Pin Name Type

1

2

3

4

5

6

AVDD

DM2

DP2

P

B

A

P

I

8

DM3

DP3

B

P

B

I

15

16

17

18

GND

DVDD

PSELF

PGANG

P

22 PWREN1#

O

P

9

23

V5

10

11

12

13

AVDD

DM4

I_5V 24

25

V33

DM0

DP0

DM1

P

RREF

AVDD

X1

B

DP4

19 OVCUR2# I_5V 26

20 PWREN2#* 27

RESET#

O

7

X2

O

14 TEST/SCL I/B 21 OVCUR1#* I_5V 28

DP1

B

GLI Confidential

Page 13

GL852G Datasheet

3.3 Pin Descriptions

Table 3.5 - Pin Descriptions

USB Interface

GL852G

I/O

Pin Name

Description

LQFP

48 Pin

QFN

28 Pin

SSOP

Type

28 Pin

DM0,DP0

DM1,DP1

DM2,DP2

DM3,DP3

DM4,DP4

3,4

5,6

1,2

3,4

25,26

27,28

2,3

B

USB signals for USPORT

USB signals for DSPORT1

USB signals for DSPORT2

USB signals for DSPORT3

USB signals for DSPORT4

9,10

17,18

21,22

6,7

12,13

15,16

8,9

11,12

A 680Ω resister must be connected between RREF

and analog ground (AGND).

RREF

11

8

4

A

Note: USB signals must be carefully handled in PCB routing. Please refer to USB 2.0 Hub Design Guide

for detailed information.

Hub Interface

GL852G

I/O

Pin Name

Description

LQFP

48 Pin

QFN

SSOP

28 Pin

Type

28 Pin

Active low. Over current indicator for DSPORT1~4

OVCUR1# is the only over current flag for GANG

mode.

42,40,

30,28

25,24,

20,19

I

OVCUR1#~4

PWREN1#~4

21,19

22,20

(pu)

Active low. Power enable output for DSPORT1~4

PWREN1# is the only power-enable output for

GANG mode.

43,41,

31,29

-

O

Green LED indicator for DSPORT1~4

*GREEN[1~2] are also used to access the external

EEPROM

1,3,4: O

2: B

(pd)

45,35,

32,23

GREEN1~4

-

For detailed information, please refer to Chapter 5.

Amber LED indicator for DSPORT1~4

*Amber [1~2] are also used to access the external

EEPROM

46,36,

33,24

O

(pd)

AMBER1~4

PSELF

-

0: GL852G is bus-powered.

1: GL852G is self-powered.

37

22

17

I

This pin is default put in input mode after power-on

reset. Individual/gang mode is strapped during this

period. After the strapping period, this pin will be set

to output mode, and then output high for normal

mode.

PGANG

39

23

18

B

When GL852G is suspended, this pin will output low.

*For detailed explanation, please see Chapter 5

Gang

Individual

input:1, output: 0@normal, 1@suspend

input:0, output: 1@normal, 0@suspend

GLI Confidential

Page 14

GL852G Datasheet

Clock and Reset Interface

I/O

GL852G

Pin Name

Description

LQFP

48 Pin

QFN

28 Pin

SSOP

Type

28 Pin

X1

X2

14

15

10

11

6

7

I

Crystal / OSC clock input

Crystal clock output.

O

Active low. External reset input, default pull high 10KΩ.

When RESET# = low, whole chip is reset to the initial

state.

RESET#

26

17

13

I

SEL48#/SEL27#:

SEL48#/

SEL27#

0 1: 48MHz OSC-in

1 0: 27MHz OSC-in

1 1: 12MHz X’tal/OSC-in

25,44

--

System Interface

I/O

GL852G

Pin Name

Description

LQFP

48 Pin

QFN

28 Pin

SSOP

28 Pin

Type

I

TEST: 0: Normal operation.

1: Chip will be put in test mode.

I2C: clock output pin

I2C data pin

TEST/SCL

SDA

27

--

18

26

14

--

(pd)

B

Power / Ground

GL852G

I/O

Type

Pin Name

Description

LQFP

48 Pin

QFN

28 Pin

SSOP

28 Pin

1,7,12,

16,19

AVDD

DVDD

GND

5,9,14

1,5,10

16

P

3.3V analog power input for analog circuits.

3.3V digital power input for digital circuits

34,38

21

-

2,8,

13,20

Ground

15

Exposed pad is connected to GND (QFN28)

5V Power input. It need be NC if using external

regulator

V5

47

27

23

P / I

5V-to-3.3V regulator Vout (LQFP48)

5V-to-3.3V regulator Vout & 3.3 input

V33

48

28

24

P / O (QFN28/SSOP28)

It can be NC or connect to 3.3V power if using external

regulator (LQFP48 only)

Note: Analog circuits are quite sensitive to power and ground noise. PCB layout must take care the power routing

and the ground plane. Please refer to USB 2.0 Hub Design Guide for detailed information.

GLI Confidential

Page 15

GL852G Datasheet

Notation:

Type

O

Output

I

Input

B

Bi-directional

B/I

B/O

P

Bi-directional, default input

Bi-directional, default output

Power / Ground

A

Analog

SO

pu

pd

odpu

Automatic output low when suspend

Internal pull up

Internal pull down

Open drain with internal pull up

GLI Confidential

Page 16

GL852G Datasheet

CHAPTER 4 BLOCK DIAGRAM

12/27/48

MHz

D+

D-

RA

M

USPORT

PLL

ROM

CPU

GPIO

FRTIMER

Transceiver

x40, x10

Control/Status

Register

USPORT

Logic

UTMI

SIE

TT

(Transaction

Translator)

TT

(Transaction

Translator)

TT

(Transaction

Translator)

TT

(Transaction

Translator)

REPEATER

REPEATER / TT Routing Logic

DSPORT1 Logic

DSPORT2 Logic

DSPORT3 Logic

DSPORT4 Logic

DSPORT

Transceiver

DSPORT

Transceiver

DSPORT

Transceiver

DSPORT

Transceiver

LED/

D+ D-

OVCUR/

PWRENB

OVCUR/

PWRENB

OVCUR/

PWRENB

OVCUR/

PWRENB

Figure 4.1 - GL852G Block Diagram (Multiple TT)

GLI Confidential

Page 17

GL852G Datasheet

CHAPTER 5 FUNCTION DESCRIPTION

5.1 General Description

5.1.1 USPORT Transceiver

USPORT (upstream port) transceiver is the analog circuit that supports both full-speed and high-speed

electrical characteristics defined in chapter 7 of USB specification Revision 2.0. USPORT transceiver will

operate in full-speed electrical signaling when GL852G is plugged into a 1.1 host/hub. USPORT transceiver

will operate in high-speed electrical signaling when GL852G is plugged into a 2.0 host/hub.

5.1.2 PLL (Phase Lock Loop)

GL852G contains a 40x PLL. PLL generates the clock sources for the whole chip. The generated clocks are

proven quite accurate that help in generating high speed signal without jitter.

5.1.3 FRTIMER

This module implements hub (micro)frame timer. The (micro)frame timer is derived from the hub’s local

clock and is synchronized to the host (micro)frame period by the host generated Start of (micro)frame (SOF).

FRTIMER keeps tracking the host’s SOF such that GL852G is always safely synchronized to the host. The

functionality of FRTIMER is described in section 11.2 of USB Specification Revision 2.0.

5.1.4 μC

μC is the micro-processor unit of GL852G. It is an 8-bit RISC processor with 9K ROM and 64 bytes RAM.

It operates at 6MIPS of 12 MHz clock to decode the USB command issued from host and then prepares the

data to respond to the host. In addition, μC can handle GPIO (general purpose I/O) settings and reading

content of EEPROM to support high flexibility for customers of different configurations of hub. These

configurations include self/bus power mode setting, individual/gang mode setting, downstream port number

setting, device removable/non-removable setting, and PID/VID setting.

5.1.5 UTMI (USB 2.0 Transceiver Microcell Interface)

UTMI handles the low level USB protocol and signaling. It’s designed based on the Intel’s UTMI

specification 1.01. The major functions of UTMI logic are to handle the data and clock recovery, NRZI

encoding/decoding, Bit stuffing /de-stuffing, supporting USB 2.0 test modes, and serial/parallel conversion.

5.1.6 USPORT Logic

USPORT implements the upstream port logic defined in section 11.6 of USB specification Revision 2.0. It

mainly manipulates traffics in the upstream direction. The main functions include the state machines of

Receiver and Transmitter, interfaces between UTMI and SIE, and traffic control to/from the REPEATER and

TT.

5.1.7 SIE (Serial Interface Engine)

SIE handles the USB protocol defined in chapter 8 of USB specification Revision 2.0. It co-works with μ C

to play the role of the hub kernel. The main functions of SIE include the state machine of USB protocol flow,

CRC check, PID error check, and timeout check. Unlike USB 1.1, bit stuffing/de-stuffing is implemented in

UTMI, not in SIE.

5.1.8 Control/Status Register

Control/Status register is the interface register between hardware and firmware. This register contains the

information necessary to control endpoint0 and endpoint1 pipelines. Through the firmware based

architecture, GL852G possesses higher flexibility to control the USB protocol easily and correctly.

GLI Confidential

Page 18

GL852G Datasheet

5.1.9 REPEATER

Repeater logic implements the control logic defined in section 11.4 and section 11.7 of USB specification

Revision 2.0. REPEATER controls the traffic flow when upstream port and downstream port are signaling in

the same speed. In addition, REPEATER will generate internal resume signal whenever a wakeup event is

issued under the situation that hub is globally suspended.

5.1.10 TT (Transaction Translator)

TT implements the control logic defined in section 11.14 ~ 11.22 of USB specification Revision 2.0. TT

basically handles the unbalanced traffic speed between the USPORT (operating in HS) and DSPORTS

(operating in FS/LS) of hub. GL852G adopts multiple TT architecture to provide the most performance

effective solution. Multiple TT provides control logics for each downstream port respectively.

5.1.11 REPEATER/TT Routing Logic

REPEATER and TT are the major traffic control machines in the USB 2.0 hub. Under situation that USPORT

and DSPORT are signaling in the same speed, REPEATER/TT routing logic switches the traffic channel to

the REPEATER. Under situation that USPORT is in the high speed signaling and DSPORT is in the full/low

speed signaling, REPEATER/TT routing logic switches the traffic channel to the TT.

5.1.11.1 Connected to 1.1 Host/Hub

If an USB 2.0 hub is connected to the downstream port of an USB 1.1 host/hub, it will operate in USB 1.1

mode. For an USB 1.1 hub, both upstream direction traffic and downstream direction traffic are passing

through REPEATER. That is, the REPEATER/TT routing logic will route the traffic channel to the

REPEATER.

USB 1.1 HOST/HUB

USPORToperating

in FS signaling

Traffic channel

is routed to

REPEATER

TT

REPEATER

DSPORT operating

in FS/LS signaling

Figure 5.1 - Operating in USB 1.1 Schemes

GLI Confidential

Page 19

GL852G Datasheet

5.1.11.2 Connected to USB 2.0 Host/Hub

If an USB 2.0 hub is connected to an USB 2.0 host/hub, it will operate in USB 2.0 mode. The upstream port

signaling is in high speed with bandwidth of 480 Mbps under this environment. The traffic channel will

then be routed to the REPEATER when the device connected to the downstream port is signaling also in

high speed. On the other hand, the traffic channel will then be routed to TT when the device connected to

the downstream port is signaling in full/low speed.

USB 2.0 HOST/HUB

USPORToperating

in HS signaling

HS vs. HS:

Traffic channel is

routed to REPEATER

HS vs. FS/LS:

Traffic channel

is routed to TT

TT

REPEATER

DSPORT operating

in FS/LS signaling

DSPORT operating

in HS signaling

Figure 5.2 - Operating in USB 2.0 Schemes

5.1.12 DSPORT Logic

DSPORT (downstream port) logic implements the control logic defined in section 11.5 of USB specification

Revision 2.0. It mainly manipulates the state machine, the connection/disconnection detection, over current

detection and power enable control, and the status LED control of the downstream port. Besides, it also

output the control signals to the DSPORT transceiver.

5.1.13 DSPORT Transceiver

DSPORT transceiver is the analog circuit that supports high-speed, full-speed, and low-speed electrical

characteristics defined in chapter 7 of USB specification Revision 2.0. In addition, each DSPORT transceiver

accurately controls its own squelch level to detect the detachment and attachment of devices.

GLI Confidential

Page 20

GL852G Datasheet

5.2 Configuration and I/O Settings

5.2.1 RESET Setting

GL852G’s power on reset can either be triggered by external reset or internal power good reset circuit. The

external reset pin, RESETJ, is connected to upstream port Vbus (5V) to sense the USB plug / unplug or 5V

voltage drop. The reset trigger voltage can be set by adjusting the value of resistor R1 and R2 (Suggested

value refers to schematics) GL852G’s internal reset is designed to monitor silicon’s internal core power

(3.3V) and initiate reset when unstable power event occurs. The power on sequence will start after the power

good voltage has been met, and the reset will be released after approximately 2.7 μS after power good.

GL852G’s reset circuit as depicted in the picture

Silicon

PCB

Ext. VBUS power-good

detection circuit input

(Pin"RESET#")

VBUS

(External 5V)

R1

R2

Global

Reset#

EXT

INT

Int. 3.3V power-good

detection circuit input

(USB PHY reset)

Figure 5.3 - Power on Reset Diagram

To fully control the reset process of GL852G, we suggest the reset time applied in the external reset circuit

should longer than that of the internal reset circuit. Timing of POR is illustrated as below figure.

Power good voltage, 2.5 ~ 2.8V

VDD

Internal reset

External reset

Clock

T_PG

…

USB command

T1

T2

Figure 5.4 - Power on Sequence of GL852G

GLI Confidential

Page 21

GL852G Datasheet

Table 5.1 - Reset Timing

Symbol

T_PG

Parameter

Min.

Max.

Unit

μs

VDD power up to internal reset (power good) assert (12MHz)

VDD power up to external reset (RESETJ) assert

RESET assert to respond USB command ready

-

3

2.7

T1

-

μs

T2

70

ms

5.2.2 PGANG Setting

To save pin count, GL852G uses the same pin to decide individual/gang mode as well as to output the

suspend flag. The individual/gang mode is decided within 20us after power on reset. Then, about 50ms later,

this pin is changed to output mode. GL852G outputs the suspend flag once it is globally suspended. For

individual mode, a pull low resister greater than 100KΩ should be placed. For gang mode, a pull high

resister which greater than 100KΩ should be placed. In figure 5.6, we also depict the suspend LED indicator

schematics. It should be noticed that the polarity of LED must be followed, otherwise the suspend current

will be over spec limitation (2.5mA).

RESET#

50 ms

GANG_CTL

Output mode, indicating

GL852G is in normal

mode or suspend mode

Input mode, strapping

to decide individual or

gang mode

Figure 5.5 - Timing of PGANG Strapping

GAND Mode

DVDD(3.3V)

Suspend LED

Indicator

100K ohm

"0": Individual Mode

"1": GANG Mode

SUSPNDO

GANG_CTL

Inside GL852G

100K ohm

Suspend LED

Indicator

On PCB

Individual

Mode

Figure 5.6 - GANG Mode Setting

GLI Confidential

Page 22

GL852G Datasheet

5.2.3 SELF/BUS Power Setting

GL852G can operate under bus power and conform to the power consumption limitation completely

(suspend current < 2.5 mA, normal operation current < 100 mA). By setting PSELF, GL852G can be

configured as a bus-power or a self-power hub.

1: Power Self

0: Power Bus

PSELF

Inside GL852G

On PCB

Figure 5.7 - SELF/BUS Power Setting

5.2.4 LED Connections

GL852G controls the LED lighting according to the flow defined in section 11.5.3 of Universal Serial Bus

Specification Revision2.0. Both manual mode and Automatic mode are supported in GL852G. When

GL852G is globally suspended, GL852G will turn off the LED to save power.

AMBER/GREEN

LED

DGND

Inside GL852G

On PCB

Figure 5.8 - LED Connection

GLI Confidential

Page 23

GL852G Datasheet

5.2.5 EEPROM Setting

GL852G replies to host commands by the default settings in the internal ROM. GL852G also offers the

ability to reply to the host according to the settings in the external EEPROM (LQFP48 supports both 93C46

and 24C02; QFN28 only supports 24C02). And to prevent the content of EEPROM from being over-written,

amber LED will be disabled when EEPROM exists. Please refer to the USB 2.0 Hub AP Note_EEPROM

Info for detailed information.

The schematics between GL852G and 93C46 are depicted in the following figures:

DVDD

EE_CS

EE_SK

EE_DI

EE_DO

CS

SK

DI

VCC

NC

DO

GND

93C46

Figure 5.9 - Schematics between GL852G and 93C46

GL852G firstly verifies the check sum after power on reset. If the check sum is correct, GL852G will take

the configuration of 93C46 as part of the descriptor contents. To prevent the content of 93C46 from being

over-written, amber LED will be disabled when 93C46 exists.

5.2.6 Power Switch Enable Polarity (Only Available for LQFP48 Package)

Both low/high-enabled power switches are supported. It is determined by jumper setting, based on the state

of pin AMBER2, as the following table:

Table 5.2 - Configuration by Power Switch Type

AMBER2

Power Switch Enable Polarity

Low-active

0

1

High-active

5.2.7 Port Number Configuration (Only Available for LQFP48 Package)

Number of downstream port can be configured as 2/3/4 ports by pin strapping in addition to EEPROM,

based on the state of pin AMBER 3, AMBER 4, as the following table:

Table 5.3 - Port Number Configuration

AMBER 3

AMBER 4

# of DP Declaration

1 (Port1)

1

0

1

0

1

0

2 (Port1/2)

3 (Port1/2/3)

4 (Port1/2/3/4)

GLI Confidential

Page 24

GL852G Datasheet

5.2.8 Non-removable Port Configuration (OnlyAvailable for LQFP48 Package)

For compound application or embedded system, downstream ports that always connected inside the system

can be set as non-removable based on the state of corresponding status LED, pin GREEN 1~4. If the pin is

pulled high in the initial stage, the corresponding port will be set as non-removable.

5.2.9 Reference Clock Configuration (Only Available for LQFP48 Package)

GL852G can support optional 27/48MHz clock source, which is selectable through GPIO configurations.

For some on-board design that 27/48MHz clock source is available, such as motherboard or Monitor built-in

applications, system integrator can leverage this feature to further reduce BOM cost by removing external

crystal.

Table 5.4 - Ref. Clock Configuration

SEL48

SEL27

Clock Source

48MHz OSC-in

0

1

0

1

27MHz OSC-in

12MHz X’tal/OSC-in

Page 25

GLI Confidential

GL852G Datasheet

CHAPTER 6 ELECTRICAL CHARACTERISTICS

6.1 Maximum Ratings

Table 6.1 - Maximum Ratings

Symbol

V₅

Parameter

5V Power Supply

Min.

-0.5

-60

Max.

Unit

V

+6.0

V_DD

3.3V Power Supply

+3.6

V

V_IN

3.3V Input Voltage for digital I/O(EE_DO) pins

Open-Drain Input (Ovcur1-4,Pself,Reset)

Input Voltage for USB signal (DP, DM) pins

Storage Temperature under bias

Frequency

+3.6

+5.5

V

V_INOD

V_INUSB

T_S

V

+3.6

V

^oC

+100

F_OSC

12 MHz  500ppm

6.2 Operating Ranges

Table 6.2 - Operating Ranges

Symbol

V₅

Parameter

5V Power Supply

Min.

Typ.

5.0

3.3

-

Max.

5.5

3.6

70

125

-

Unit

4.5

3.0

-0.5

0.5

0

V

V_DD

3.3V Power Supply

V_IND

Input Voltage for digital I/O pins

V

V_INUSB

T_A

Input Voltage for USB signal (DP, DM) pins

Ambient Temperature

V

^oC

^oC/W

T_J

Absolute maximum junction temperature

Thermal Characteristics LQFP 48

Thermal Characteristics QFN 28

Thermal Characteristics SSOP 28

0

-

78.7

33.3

61.6

θ

-

JA

-

6.3 DC Characteristics

Table 6.3 - DC Characteristics except USB Signals

Symbol

P_D

Parameter

Min.

-

Typ.

Max.

431.5

0.8

-

Unit

mW

V

Power Dissipation

-

V_IL

LOW level input voltage

-

V_IH

HIGH level input voltage

2.0

1.4

0.87

-

1.5

0.94

-

V

V_TLH

V_THL

V_OL

LOW to HIGH threshold voltage

HIGH to LOW threshold voltage

LOW level output voltage when I_OL=8mA

HIGH level output voltage when I_OH=8mA

1.6

0.99

0.4

-

V

V_OH

2.4

-

V

Leakage current for pads with internal pull up or pull

down resistor

I_OLK

-

30

A

R_DN

R_UP

Pad internal pull down resister

Pad internal pull up resister

29K

80K

59K

135K

Ω

108K 140K

GLI Confidential

Page 26

GL852G Datasheet

Table 6.4 - DC Characteristics of USB Signals under FS/LS Mode

Symbol

V_OL

V_OH

V_DI

Parameter

DPF/DMF static output LOW(R_Lof 1.5K to 3.6V )

DPF/DMF static output HIGH (R_Lof 15K to GND )

Differential input sensitivity

Min.

0

Typ.

Max.

0.3

3.6

-

Unit

V

-

2.8

0.2

0.8

0.2

-

V

V_CM

V_SE

Differential common mode range

Single-ended receiver threshold

Transceiver capacitance

2.5

-

V

C_IN

20

pF

A

Ω

I_LO

Hi-Z state data line leakage

-10

28

+10

44

Z_DRV

Driver output resistance

Table 6.5 - DC Characteristics of USB Signals under HS Mode

Symbol

V_OL

Parameter

Min.

-

Typ.

-

Max.

0.1

5

Unit

V

DPH/DMH static output LOW(R_Lof 1.5K to 3.6V )

Transceiver capacitance

C_IN

4

4.5

0

pF

A

Ω

I_LO

Hi-Z state data line leakage

-5

+5

Z_DRV

Driver output resistance for USB 2.0 HS

48

45

42

6.4 Power Consumption

Table 6.6 - GL852G power consumption

Condition

Host

Current

Symbol

Unit

Active ports

Device

I_SUSP

Suspend

473

76

uA

4

H^*1

H

mA

3

H

66

mA

I_CC

2

1

H

58

H

50

No Active

H

N/A

41.7

*:H: High-Speed

Note:

Test result represents silicon level operating current, without considering additional power

consumption contributed by external over-current protection circuit such as power switch or

polyfuse.

GLI Confidential

Page 27

GL852G Datasheet

6.5 AC Characteristics

GL852G LQFP 48 pin package can support both 93C46 & 24C02 type EEPROM for customized VID/PID.

GL852G QFN28/SSOP28 pin package can only support 24C02 type EEPROM. AC characteristics of these

two types of EEPROM summarized as below figures and tables.

6.5.1 93C46 EEPROM IF

t

CSH

CE

SK

t

CSS

t

SKH

t

SKL

t

DIS

t

DIH

DI

t

PD0

t

PD1

DO

Table 6.7 - AC Characteristics of EEPROM Interface (93C46)

Symbol

t_CSS

Parameter

CS Setup Time

CS Hold Time

Min.

3.0

1.0

2.2

1.8

2.4

Typ.

Max.

Units

t_CSH

t_SKH

t_SKL

t_DIS

SK High Time

SK Low Time

us

DI Setup Time

DI Hold Time

t_DIH

t_PD1

Output Delay to “1”

Output Delay to “0”

1.8

t_PD0

Page 28

GLI Confidential

GL852G Datasheet

6.5.2 24C02 EEPROM Interface

Table 6.8 - AC Characteristics of EEPROM Interface (24C02)

Page 29

GLI Confidential

GL852G Datasheet

6.6 On-Chip Power Regulator

GL852G requires 3.3V source power for normal operation of internal core logic and USB physical layer

(PHY). The integrated low-drop power regulator converts 5V power input from USB cable (Vbus) to 3.3V

voltage for silicon power source. The 3.3V power output is guaranteed by an internal voltage reference

circuit to prevent unstable 5V power compromise USB data integrity. The regulator’s maximum current

loading is 200mA, which provides enough tolerance for normal GL852G operation (below 100mA).

On-chip Power Regulator Features:



5V to 3.3V low-drop power regulator

200mA maximum output driving capability

Provide stable 3.3V output when Vin = 3.4V~5.5V

Max. suspend current:190uA; typical suspend current 164uA

3.5

3

2.5

2

1.5

1

0.5

0

V5

Figure 6.1 - Vin(V5) vs Vout(V33)*

*Note: Measured environment: Ambient temperature = 25℃ / Current Loading = 200mA

GLI Confidential

Page 30

GL852G Datasheet

CHAPTER 7 PACKAGE DIMENSION

Internal

No.

Versio

GL852G

n No.

AAAAAAAAAA

YWWXXXXXXXX

Date

Lot Code

Code

Figure 7.1 - GL852G 48 Pin LQFP Package

GLI Confidential

Page 31

GL852G Datasheet

Version

No.

Internal

No.

GL852G

AAAAAAA

YWWXXXX

Date

Lot Code

Code

Figure 7.2 - GL852G 28 Pin QFN Package

GLI Confidential

Page 32

GL852G Datasheet

Internal No.

GL852G

Version

No.

AAAAAAAAAA

YWWXXXXXXXX

Date

Code

Lot Code

Figure 7.3 - GL852G 28 Pin SSOP Package

GLI Confidential

Page 33

GL852G Datasheet

CHAPTER 8 ORDERING INFORMATION

Table 8.1 - Ordering Information

Part Number

GL852G-MNGXX

GL852G-OHGXX

GL852G-HHGXX

Package

LQFP 48

QFN 28

SSOP 28

Green/Wire Material

Green Package

Version

XX

Status

Available

Green Package

XX

Green Package

XX

Note: The marking of "OHG" will not be shown on the IC due to QFN28 package size limitation.

GLI Confidential

Page 34

电子百科

产品导航

产品型号GL852G的概述

产品型号GL852G-MNGXX的Datasheet PDF文件预览

GL852G相关产品..

GL852G相关文章