欢迎访问ic37.com |
会员登录 免费注册
发布采购
所在地: 型号: 精确
  • 批量询价
  •  
  • 供应商
  • 型号
  • 数量
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
  •  
  • 北京元坤伟业科技有限公司

         该会员已使用本站17年以上

  • HA4600CBZ96
  • 数量-
  • 厂家-
  • 封装-
  • 批号-
  • -
  • QQ:857273081QQ:857273081 复制
    QQ:1594462451QQ:1594462451 复制
  • 010-62104931、62106431、62104891、62104791 QQ:857273081QQ:1594462451
更多
  • HA4600CBZ96图
  • 集好芯城

     该会员已使用本站13年以上
  • HA4600CBZ96
  • 数量1068 
  • 厂家Renesas Electronics America Inc 
  • 封装 
  • 批号最新批次 
  • 原厂原装公司现货
  • QQ:3008092965QQ:3008092965 复制
    QQ:3008092965QQ:3008092965 复制
  • 0755-83239307 QQ:3008092965QQ:3008092965
  • HA4600CBZ96图
  • 深圳市惊羽科技有限公司

     该会员已使用本站11年以上
  • HA4600CBZ96
  • 数量9328 
  • 厂家RENESAS-瑞萨. 
  • 封装SOP-8.贴片 
  • 批号▉▉:2年内 
  • ▉▉¥12.2元一有问必回一有长期订货一备货HK仓库
  • QQ:43871025QQ:43871025 复制
  • 131-4700-5145---Q-微-恭-候---有-问-秒-回 QQ:43871025
  • HA4600CBZ96图
  • 深圳市芯福林电子有限公司

     该会员已使用本站15年以上
  • HA4600CBZ96
  • 数量65000 
  • 厂家Intersil 
  • 封装8-SOIC 
  • 批号23+ 
  • 真实库存全新原装正品!代理此型号
  • QQ:2881495753QQ:2881495753 复制
  • 0755-23605827 QQ:2881495753
  • HA4600CBZ96图
  • 绿盛电子(香港)有限公司

     该会员已使用本站12年以上
  • HA4600CBZ96
  • 数量2015 
  • 厂家INTERSIL 
  • 封装SOP/DIP 
  • 批号19889 
  • ★一级代理原装现货,特价热卖!
  • QQ:2752732883QQ:2752732883 复制
    QQ:240616963QQ:240616963 复制
  • 0755-25165869 QQ:2752732883QQ:240616963
  • HA4600CBZ96图
  • 深圳市顺鑫诚电子科技有限公司

     该会员已使用本站14年以上
  • HA4600CBZ96
  • 数量5000 
  • 厂家INTELRSIL 
  • 封装SOIC 
  • 批号18+ 
  • 保证原装正品,欢迎来电咨询
  • QQ:1533095505QQ:1533095505 复制
    QQ:449551876QQ:449551876 复制
  • 0755-29486608 QQ:1533095505QQ:449551876
  • HA4600CBZ96图
  • 万三科技(深圳)有限公司

     该会员已使用本站2年以上
  • HA4600CBZ96
  • 数量660000 
  • 厂家XICOR 
  • 封装SOIC-8 
  • 批号23+ 
  • 支持实单/只做原装
  • QQ:3008961398QQ:3008961398 复制
  • 0755-21006672 QQ:3008961398
  • HA4600CBZ96图
  • 深圳市一线半导体有限公司

     该会员已使用本站16年以上
  • HA4600CBZ96
  • 数量28000 
  • 厂家Renesas Electronics America Inc 
  • 封装 
  • 批号 
  • 全新原装部分现货其他订货
  • QQ:2881493920QQ:2881493920 复制
    QQ:2881493921QQ:2881493921 复制
  • 0755-88608801多线 QQ:2881493920QQ:2881493921
  • HA4600CBZ96图
  • 深圳市科雨电子有限公司

     该会员已使用本站9年以上
  • HA4600CBZ96
  • 数量2500 
  • 厂家INTERSIL 
  • 封装SOP-8 
  • 批号24+ 
  • ★体验愉快问购元件!!就找我吧!单价:34元
  • QQ:97877805QQ:97877805 复制
  • 171-4729-0036(微信同号) QQ:97877805

产品型号HA4600CBZ96的Datasheet PDF文件预览

HA4600  
®
Data Sheet  
December 22, 2005  
FN3990.8  
480MHz, SOT-23, Video Buffer with Output  
Dis able  
Features  
• Micro Package Available . . . . . . . . . . . . . . . . . . . SOT-23  
• Low Power Dissipation. . . . . . . . . . . . . . . . . . . . . 105mW  
• Symmetrical Slew Rates . . . . . . . . . . . . . . . . . . 1700V/µs  
• 0.1dB Gain Flatness. . . . . . . . . . . . . . . . . . . . . . . 250MHz  
• Off Isolation (100MHz) . . . . . . . . . . . . . . . . . . . . . . . 85dB  
• Differential Gain and Phase . . . . . . . 0.01%/0.01 Degrees  
• High ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . >1800V  
• TTL Compatible Enable Input  
The HA4600 is a very wide bandwidth, unity gain buffer ideal  
for professional video switching, HDTV, computer monitor  
routing, and other high performance applications. The circuit  
features very low power dissipation (105mW Enabled, 1mW  
Disabled), excellent differential gain and phase, and very  
high off isolation. When disabled, the output is switched to a  
high impedance state, making the HA4600 ideal for routing  
matrix equipment and video multiplexers.  
The HA4600 also features fast switching and symmetric  
slew rates. A typical application for the HA4600 is interfacing  
Intersil’s wide range of video crosspoint switches.  
• Improved Replacement for GB4600  
• Pb-Free Plus Anneal Available (RoHS Compliant)  
For applications requiring a tally output (enable indicator),  
please refer to the HA4201 data sheet.  
Applications  
• Professional Video Switching and Routing  
• Video Multiplexers  
Pinouts  
HA4600  
(PDIP, SOIC)  
TOP VIEW  
• HDTV  
• Computer Graphics  
• RF Switching and Routing  
• PCM Data Routing  
EN  
V-  
1
2
3
4
8
7
6
5
GND  
IN  
Ordering Information  
V+  
NC  
NC  
TEMP.  
RANGE  
(°C)  
PART  
NUMBER  
PART  
MARKING  
PKG.  
OUT  
PACKAGE  
DWG. #  
HA4600CP  
HA4600CP  
0 to 70 8 Ld PDIP  
E8.3  
E8.3  
HA4600  
(SOT-23)  
TOP VIEW  
HA4600CPZ  
(Note)  
HA4600CPZ 0 to 70 8 Ld PDIP*  
(Pb-free)  
HA4600CB  
4600CB  
0 to 70 8 Ld SOIC  
M8.15  
M8.15  
HA4600CB96 4600CB  
0 to 70 8 Ld SOIC Tape  
and Reel  
EN  
V-  
OUT  
6
1
2
3
HA4600CBZ  
(Note)  
4600CBZ  
0 to 70 8 Ld SOIC  
(Pb-free)  
M8.15  
M8.15  
5
4
V+  
IN  
GND  
HA4600CBZ96 4600CBZ  
(Note)  
0 to 70 8 Ld SOIC Tape  
and Reel (Pb-free)  
HA4600CH96 46  
0 to 70 6 Ld SOT-23 Tape P6.064  
and Reel  
HA4600CHZ96 46Z  
(Note)  
0 to 70 6 Ld SOT-23 Tape P6.064  
and Reel (Pb-free)  
Truth Table  
EN  
OUT  
*Pb-free PDIPs can be used for through hole wave solder processing only.  
They are not intended for use in Reflow solder processing applications.  
0
High Z  
Active  
NOTE: Intersil Pb-free plus anneal products employ special Pb-free  
material sets; molding compounds/die attach materials and 100% matte  
tin plate termination finish, which are RoHS compliant and compatible with  
both SnPb and Pb-free soldering operations. Intersil Pb-free products are  
MSL classified at Pb-free peak reflow temperatures that meet or exceed  
the Pb-free requirements of IPC/JEDEC J STD-020.  
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.  
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.  
Copyright Intersil Americas Inc. 2000, 2005. All Rights Reserved  
1
All other trademarks mentioned are the property of their respective owners.  
HA4600  
Absolute Maximum Ratings  
Thermal Information  
Voltage Between V+ and V-. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V  
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V  
Digital Input Current (Note 2). . . . . . . . . . . . . . . . . . . . . . . . . ±25mA  
Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA  
ESD Rating  
Thermal Resistance (Typical, Note 1)  
θJA (°C/W)  
SUPPLY  
PDIP Package* . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
SOT-23 Package . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Maximum Junction Temperature (Die). . . . . . . . . . . . . . . . . . . 175°C  
Maximum Junction Temperature (Plastic Package) . . . . . . . 150°C  
Maximum Storage Temperature Range . . . . . . . . . -65°C to 150°C  
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300°C  
(SOIC and SOT-23 - Lead Tips Only)  
130  
170  
210  
Human Body Model (Per MIL-STD-883 Method 3015.7) . . . . 1800V  
Operating Conditions  
Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C  
*Pb-free PDIPs can be used for through hole wave solder processing  
only. They are not intended for use in Reflow solder processing  
applications.  
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the  
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.  
NOTES:  
1. θ is measured with the component mounted on an evaluation PC board in free air.  
JA  
2. If an input signal is applied before the supplies are powered up, the input current must be limited to this maximum value.  
Electrical Specifications V  
= ±5V, R = 10k, V  
= 2.0V, Unless Otherwise Specified  
SUPPLY  
L
EN  
PARAMETER  
TEST CONDITIONS  
TEMP. (°C)  
MIN  
TYP  
MAX  
UNITS  
DC SUPPLY CHARACTERISTICS  
Supply Voltage  
Full  
25, 70  
0
±4.5  
±5.0  
10.5  
-
±5.5  
13  
V
Supply Current (V  
= 0V)  
V
V
V
V
= 2V  
-
-
-
-
mA  
mA  
µA  
µA  
OUT  
EN  
EN  
EN  
EN  
= 2V  
14.5  
115  
125  
= 0.8V  
= 0.8V  
25, 70  
0
100  
100  
ANALOG DC CHARACTERISTICS  
Output Voltage Swing without Clipping  
V
= V ± V ± 20mV  
IN IO  
25, 70  
0
±2.7  
±2.4  
15  
-
±2.8  
±2.5  
20  
-
-
V
V
OUT  
Output Current  
Full  
Full  
25  
-
mA  
µA  
Input Bias Current  
30  
50  
10  
50  
Output Offset Voltage  
Output Offset Voltage Drift (Note 3)  
SWITCHING CHARACTERISTICS  
Turn-On Time  
-10  
-
-
mV  
µV/°C  
Full  
25  
25  
25  
-
-
160  
320  
-
-
ns  
ns  
Turn-Off Time  
DIGITAL DC CHARACTERISTICS  
Input Logic High Voltage  
Input Logic Low Voltage  
EN Input Current  
Full  
Full  
Full  
2
-
-
-
-
-
0.8  
2
V
V
0V to 4V  
-2  
µA  
AC CHARACTERISTICS  
Insertion Loss  
1V  
Full  
-
0.04  
0.05  
dB  
P-P  
FN3990.8  
2
December 22, 2005  
HA4600  
Electrical Specifications V  
PARAMETER  
= ±5V, R = 10k, V = 2.0V, Unless Otherwise Specified (Continued)  
EN  
SUPPLY  
L
TEST CONDITIONS  
= 82, C = 10pF  
TEMP. (°C)  
25  
MIN  
TYP  
480  
380  
370  
250  
175  
170  
400  
1.0  
MAX  
UNITS  
MHz  
MHz  
MHz  
MHz  
MHz  
MHz  
kΩ  
-3dB Bandwidth  
R
R
R
R
R
R
-
-
S
S
S
S
S
S
L
= 43, C = 15pF  
25  
-
-
L
= 36, C = 21pF  
25  
-
-
L
±0.1dB Flat Bandwidth  
= 82, C = 10pF  
25  
-
-
L
= 43, C = 15pF  
25  
-
-
L
= 36, C = 21pF  
25  
-
-
L
Input Resistance  
Full  
Full  
Full  
Full  
25  
200  
-
Input Capacitance  
-
-
-
-
-
-
-
pF  
Enabled Output Resistance  
Disabled Output Capacitance  
Differential Gain (Note 3)  
Differential Phase (Note 3)  
Off Isolation  
15  
-
-
V
= 0.8V  
2.0  
pF  
EN  
4.43MHz  
4.43MHz  
0.01  
0.01  
85  
0.02  
0.02  
-
%
25  
Degrees  
dB  
1V  
, 100MHz,  
P-P  
Full  
V
= 0.8V, R = 10Ω  
EN  
L
Slew Rate (1.5V  
, +SR/-SR)  
P-P  
R
R
R
= 82, C = 10pF  
25  
25  
-
-
-
-
-
1750/1770  
1460/1360  
1410/1360  
0.01  
-
V/µs  
V/µs  
V/µs  
%
S
S
S
L
= 43, C = 15pF  
-
-
L
= 36, C = 21pF  
25  
L
Total Harmonic Distortion (Note 3)  
Disabled Output Resistance  
NOTE:  
Full  
Full  
0.1  
-
12  
MΩ  
3. This parameter is not tested. The limits are guaranteed based on lab characterization, and reflect lot-to-lot variation.  
Keep input and output traces as short as possible, because  
trace inductance and capacitance can easily become the  
performance limiting items.  
AC Tes t Circuit  
510Ω  
400Ω  
500Ω  
HA4600  
75Ω  
R
S
-
V
+
OUT  
V
IN  
HFA1100  
75Ω  
C
10kΩ  
X
NOTE: C = C + Test Fixture Capacitance.  
L
X
PC Board Layout  
The frequency response of this circuit depends greatly on the  
care taken in designing the PC board. The use of low  
inductance components such as chip resistors and chip  
capacitors is strongly recommended, while a solid ground  
plane is a must!  
Attention should be given to decoupling the power supplies.  
A large value (10µF) tantalum in parallel with a small value  
(0.1µF) chip capacitor works well in most cases.  
FN3990.8  
3
December 22, 2005  
HA4600  
latch-up, the input currents during power up must not exceed  
the values listed in the Absolute Maximum Ratings.  
Application Information  
General  
Inters ils Cros s point Family  
The HA4600 is a unity gain buffer that is optimized for high  
performance video applications. The output disable function  
makes it ideal for the matrix element in small, high input-to-  
output isolation switchers and routers. This buffer contains no  
feedback or gain setting resistors, so the output is a true high  
impedance load when the IC is disabled (EN = 0). The HA4600  
also excels as an input buffer for routers with a large number of  
outputs (i.e. each input must connect to a large number of  
outputs) and delivers performance superior to most video  
amplifiers at a fraction of the cost. As an input buffer, the  
HA4600’s low input capacitance and high input resistance  
provide excellent video terminations when used with an  
external 75resistor.  
Intersil offers a variety of 1 x 1 and 4 x 1 crosspoint switches. In  
addition to the HA4600, the 1 x 1 family includes the HA4201  
which is an essentially similar device that includes a Tally  
output (enable indicator). The 4 x 1 family is comprised of the  
HA4314, HA4404, and HA4344. The HA4314 is a 14 lead basic  
4 x 1 crosspoint. The HA4404 is a 16 lead device with Tally  
outputs to indicate the selected channel. The HA4344 is a 16  
lead crosspoint with synchronized control lines (A0, A1, CS).  
With synchronization, the control information for the next  
channel switch can be loaded into the crosspoint without  
affecting the current state. On a subsequent clock edge the  
stored control state effects the desired channel switch.  
Frequency Res pons e  
Most applications utilizing the HA4600 require a series  
output resistor, R , to tune the response for the specific load  
S
capacitance, C , driven. Bandwidth and slew rate degrade  
L
as C increases (as shown in the Electrical Specification  
L
table), so give careful consideration to component  
placement to minimize trace length. As an example, -3dB  
bandwidth decreases to 160MHz for C = 100pF, R = 0.  
L
S
In big matrix configurations where C is large, better  
L
frequency response is obtained by cascading two levels of  
crosspoints in the case of multiplexed outputs (see Figure  
2), or distributing the load between two drivers if C is due to  
L
bussing and subsequent stage input capacitance.  
Control Signals  
EN - The ENABLE input is a TTL/CMOS compatible, active  
high input. When driven low this input forces the output to a  
true high impedance state and reduces the power  
dissipation by two orders of magnitude. The EN input has no  
on-chip pull-up resistor, so it must be connected to a logic  
high (recommend V+) if the enable function isn’t utilized.  
Switcher/Router Applications  
Figure 1 illustrates one possible implementation of a  
wideband, low power, 4 x 4 switcher/router. A 4 x 4  
switcher/router allows any of the four outputs to be driven by  
any one of the four inputs (e.g. each of the four inputs may  
connect to a different output, or an input may connect to  
multiple outputs). This application utilizes the HA4600 for the  
input buffer, the HA4404 (4 x 1 crosspoint switch) as the  
switch matrix, and the HFA1112 (programmable gain buffer)  
as the gain of two output driver. Figure 2 details a 16 x 1  
switcher (basically a 16:1 MUX) which uses the HA4600 in a  
cascaded stage configuration to minimize capacitive loading  
at each output node, thus increasing system bandwidth.  
Power Up Cons iderations  
No signals should be applied to the analog or digital inputs  
before the power supplies are activated. Latch-up may occur  
if the inputs are driven at the time of power up. To prevent  
FN3990.8  
4
December 22, 2005  
HA4600  
INPUT BUFFERS  
EN  
SWITCH MATRIX  
10kΩ  
SOURCE0  
75Ω  
OUT  
R
S
IN0  
T0  
IN0  
T0  
IN0  
T0  
IN0  
T0  
HA4600  
CS  
CS  
CS  
CS  
SOURCE1  
75Ω  
HA4404  
HA4404  
HA4404  
HA4404  
OUT  
OUT  
OUT  
OUT  
SOURCE2  
75Ω  
R
R
R
R
S
S
S
S
IN3  
T3  
IN3  
T3  
IN3  
T3  
IN3  
T3  
EN  
OUT  
SOURCE3  
75Ω  
10kΩ  
R
S
+
+
+
+
-
-
-
-
HA4600  
OUTPUT BUFFERS  
(HFA1112 OR HFA1115)  
X2  
X2  
X2  
X2  
75Ω  
75Ω  
75Ω  
75Ω  
OUT0  
OUT1  
OUT2  
OUT3  
FIGURE 1. 4 x 4 SWITCHER/ROUTER APPLICATION  
SWITCHING MATRIX  
IN0  
ISOLATION MUX  
OUTPUT BUFFER  
SOURCE0  
75Ω  
IN1  
IN2  
IN3  
T0  
SOURCE3  
10kΩ  
75Ω  
T3  
R
S
OUT  
EN  
R
S
OUT  
T0  
SOURCE4  
SOURCE7  
IN0  
IN1  
IN2  
IN3  
R
S
HA4600  
75Ω  
75Ω  
T3  
HFA1112 OR HFA1115  
75Ω  
-
OUT  
+
HA4404  
X2  
SOURCE8  
IN0  
IN1  
IN2  
IN3  
75Ω  
75Ω  
T0  
T3  
SOURCE11  
10kΩ  
R
S
EN  
R
S
OUT  
OUT  
T0  
SOURCE12  
SOURCE15  
IN0  
IN1  
IN2  
IN3  
HA4600  
R
S
75Ω  
75Ω  
T3  
HA4404  
FIGURE 2. 16 x 1 SWITCHER APPLICATION  
FN3990.8  
December 22, 2005  
5
HA4600  
Typical Performance Curves  
V
= ±5V, T = 25°C, R = 10k, Unless Otherwise Specified  
SUPPLY  
A
L
1.25  
1.20  
1.15  
1.10  
1.0  
0.75  
0.5  
1.05  
1.0  
0.25  
0
0.95  
0.90  
0.85  
-0.25  
-0.5  
0.80  
0.75  
-0.75  
1
10  
100  
500  
-1.0  
TIME (5ns/DIV.)  
FREQUENCY (MHz)  
FIGURE 3. LARGE SIGNAL PULSE RESPONSE  
FIGURE 4. INPUT CAPACITANCE vs FREQUENCY  
12  
0.4  
0.3  
0.2  
0.1  
0
9
6
R
= 36Ω  
R
= 43Ω  
S
S
R
C
= 82Ω  
= 10pF  
S
L
C
= 21pF  
C
= 15pF  
R
C
= 43Ω  
= 15pF  
L
L
S
L
3
0
-3  
-0.1  
-0.2  
R
= 82Ω  
R
= 36Ω  
S
S
-6  
-9  
C
= 10pF  
C
= 21pF  
L
L
-0.3  
-0.4  
-12  
10  
500  
100  
1
1
10  
FREQUENCY (MHz)  
100  
750  
FREQUENCY (MHz)  
FIGURE 6. GAIN FLATNESS  
FIGURE 5. FREQUENCY RESPONSE  
V
R
= 1V  
P-P  
IN  
= 10Ω  
-50  
-60  
L
PDIP, SOIC  
-70  
-80  
SOT-23  
-90  
-100  
-110  
-120  
-130  
PDIP, SOIC  
1
10  
FREQUENCY (MHz)  
100  
500  
FIGURE 7. OFF ISOLATION  
FN3990.8  
December 22, 2005  
6
HA4600  
Die Characteris tics  
DIE DIMENSIONS:  
SUBSTRATE POTENTIAL (Powered Up):  
51 mils x 36 mils x 19 mils  
V-  
1290µm x 910µm x 483µm  
PASSIVATION:  
METALLIZATION:  
Type: Nitride  
Type: Metal 1: AICu (1%)/TiW  
Thickness: Metal 1: 6kÅ ±0.8kÅ  
Type: Metal 2: AICu (1%)  
Thickness: 4kÅ ±0.5kÅ  
TRANSISTOR COUNT:  
53  
Thickness: Metal 2: 16kÅ ±1.1kÅ  
Metallization Mas k Layout  
HA4600  
EN  
V-  
GND  
IN  
V+  
OUT  
NC  
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.  
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality  
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without  
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and  
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result  
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.  
For information regarding Intersil Corporation and its products, see www.intersil.com  
FN3990.8  
7
December 22, 2005  
配单直通车
HA4600CBZ96产品参数
型号:HA4600CBZ96
Brand Name:Intersil
是否Rohs认证: 符合
生命周期:Obsolete
IHS 制造商:INTERSIL CORP
零件包装代码:SOIC, SOT
包装说明:SOP, SOP8,.25
针数:8, 6
Reach Compliance Code:compliant
ECCN代码:EAR99
HTS代码:8542.33.00.01
Factory Lead Time:1 week
风险等级:5.67
Is Samacsys:N
放大器类型:BUFFER
最大平均偏置电流 (IIB):50 µA
标称带宽 (3dB):480 MHz
JESD-30 代码:R-PDSO-G8
JESD-609代码:e3
长度:4.9 mm
湿度敏感等级:1
负供电电压上限:-6 V
标称负供电电压 (Vsup):-5 V
功能数量:1
端子数量:8
最高工作温度:70 °C
最低工作温度:
最小输出电流:0.015 A
封装主体材料:PLASTIC/EPOXY
封装代码:SOP
封装等效代码:SOP8,.25
封装形状:RECTANGULAR
封装形式:SMALL OUTLINE
峰值回流温度(摄氏度):260
电源:+-5 V
认证状态:Not Qualified
座面最大高度:1.75 mm
标称压摆率:1750 V/us
子类别:Buffer Amplifier
最大压摆率:14.5 mA
供电电压上限:6 V
标称供电电压 (Vsup):5 V
表面贴装:YES
技术:BIPOLAR
温度等级:COMMERCIAL
端子面层:Matte Tin (Sn) - annealed
端子形式:GULL WING
端子节距:1.27 mm
端子位置:DUAL
处于峰值回流温度下的最长时间:30
宽度:3.9 mm
Base Number Matches:1
  •  
  • 供货商
  • 型号 *
  • 数量*
  • 厂商
  • 封装
  • 批号
  • 交易说明
  • 询价
批量询价选中的记录已选中0条,每次最多15条。
 复制成功!