DATA BULLETIN
MX803A
Features
•
Full Duplex Audio Signaling Processor
Single Tone
Selective Call systems
•
Tone Decoder with programmable
NOTONE timer.
•
Two Individual tone encoders and a
programmable TX Period Timer.
•
Low Power CMOS Device
•
On-Chip programmable amplifier.
•
C-BUS Compatible
SIGNAL INPUT BIAS
DIGITAL
NOISE
FILTER 1
RX FILTER
SWITCH
Audio Signaling Processor
PRELIMINARY INFORMATION
Applications
•
Signaling Systems supported
SelCall (CCIR, EEA, ZVEI I / II /III)
2-Tone SelCall
DTMF Encode
•
Inband Tone Signaling capability for
LMR and other Radio Systems.
(RX)
AUDIO IN
DIGITAL
NOISE
FILTER 2
COMMAND DATA
QUALITY
METER
PROGRAMMABLE
NOTONE
TIMER
REPLY DATA
GATE TIME
GENERATOR
C-BUS
INTERFACE
AND
CONTROL
LOGIC
CHIP SELECT
INTERRUPT
SERIAL CLOCK
LOGIC INPUT
FREQUENCY
COUNTER
V
DD
PROGRAMMABLE
(TX PERIOD)
TIMER
V
BIAS
TONE 1
GENERATOR
5-/2-TONE
DTMF 1
LOW
PASS
FILTER
TONE 1 OUT
SUM IN
SWITCHED SUM OUT
V
SS
_
V
BIAS
XTAL/
CLOCK
XTAL
AUDIO SWITCH IN
AUDIO
SWITCH
SUMMING
SWITCH
SUM OUT
CAL/CUES OUT
+
SUMMING
AMPLIFIER
CUES
CAL/CUES
SWITCH
CLOCK
GENERATOR
CAL
TONE 2
GENERATOR
CUES/DTMF 2
LOW
PASS
FILTER
TONE 2 OUT
SWITCH OUT
The MX803A is an audio signaling processor that provides inband tone signaling capabilities for LMR and other Radio
systems. A low-power CMOS device, the MX803A is a member of the DBS800 (Digitally integrated Baseband Sub-
system) IC family (See section 4.2). Supported Signaling systems include SelCall (CCIR, EEA, ZVEI I, II, and III) 2-Tone
SelCall and DTMF encode. The use of a non-predictive decoder and a versatile encoder, allows the MX803A to operate
in any standard or non-standard tone system.
The MX803A is a full-duplex device for use with Single Tone or Selective Call systems. The MX803A consists of a tone
decoder with a programmable NOTONE timer, two individual tone encoders and a programmable TX period timer, and an
on-chip summing amplifier. Under the control of a
µC,
the MX803A will simultaneously encode and transmit 1 or 2 audio
tones in the 208-3000Hz range, as well as detect, decode, and indicate the frequency of any non-predicted input tone in
the frequency range of 313 to 6000Hz.
The MX803A is available in 24-pin CDIP (MX803AJ), 24-pin PLCC (MX803ALH), and 24-pin SOIC (MX803ADW)
packages.
©
1996 MX•COM, INC.
Tele: 800 638 5577 910 744 5050 Fax: 910 744 5054
Doc. # 20480122.003