FDDI, 100 Mbps ATM, and
Fast Ethernet Transceivers
in Low Cost 1x9 Package Style
Data Sheet
HFBR-5103/-5103T
1300 nm 2000 m
HFBR-5103A/-5103AT/
-5103P/-5103PE
Description
The HFBR-5100 family of trans-
ceivers from Agilent
Technologies provide the system
designer with products to
implement a range of FDDI and
ATM (Asynchronous Transfer
Mode) designs at the 100 Mbps/
125 MBd rate.
The transceivers are all supplied
in the new industry standard 1x9
SIP package style with either a
duplex SC or a duplex ST*
connector interface.
FDDI PMD, ATM and Fast
Ethernet 2000 m Backbone
Links
The HFBR-5103/-5103T are
1300 nm products with optical
performance compliant with the
FDDI PMD standard. The FDDI
PMD standard is ISO/IEC 9314-3:
1990 and ANSI X3.166 - 1990.
These transceivers for 2000 meter
multimode fiber backbones are
supplied in the small 1x9 duplex
SC or ST package style for those
designers who want to avoid the
larger MIC/R (Media Interface
Connector/Receptacle) defined in
the FDDI PMD standard.
Agilent Technologies also
provides several other FDDI
products compliant with the PMD
*ST is a registered trademark of AT&T Lightguide Cable Connectors.
Features
• Full Compliance with the
Optical Performance
Requirements of the FDDI
PMD Standard
• Full Compliance with the
FDDI LCF-PMD Standard
• Full Compliance with the
Optical Performance
Requirements of the ATM
100 Mbps Physical Layer
• Full Compliance with the
Optical Performance
Requirements of
100 Base-FX Version of
IEEE 802.3u
• Multisourced 1x9 Package
Style with Choice of Duplex
SC or Duplex ST*
Receptacle
• Wave Solder and Aqueous
Wash Process Compatible
• Manufactured in an ISO
9002 Certified Facility
and SM-PMD standards. These
products are available with MIC/
R, ST
©
and FC connector styles.
They are available in the 1x13
and 2x11 transceiver and 16 pin
transmitter/receiver package
styles for those designs that
require these alternate
configurations.
The HFBR-5103/-5103T is also
useful for both ATM 100 Mbps
interfaces and Fast Ethernet 100
Base-FX interfaces. The ATM
Forum User-Network Interface
(UNI) Standard, Version 3.0,
defines the Physical Layer for
100 Mbps Multimode Fiber
Interface for ATM in Section 2.3
to be the FDDI PMD Standard.
Likewise, the Fast Ethernet
Alliance defines the Physical
Layer for 100 Base-FX for Fast
Ethernet to be the FDDI PMD
Standard.
Note: The “T” in the product numbers
indicates a transceiver with a duplex ST
connector receptacle.
Product numbers without a “T” indicate
transceivers with a duplex SC connector
receptacle.
Applications
• Multimode Fiber Backbone
Links
• Multimode Fiber Wiring
Closet to Desktop Links
• Multimode Fiber Media
Converter
ETC [ ETC ]
