Data Sheet
June 2000
JAHW050A and JAHW075A Power Modules:
dc-dc Converters; 36 Vdc to 75 Vdc Input, 5 Vdc Output; 50 W to 75 W
Features
n
Small size: 61.0 mm x 57.9 mm x 12.7 mm
(2.40 in. x 2.28 in. x 0.50 in.)
High power density
Very high efficiency: 90% typical
Low output noise
Constant frequency
Industry-standard pinout
Metal baseplate
2:1 input voltage range
Overcurrent protection
Remote on/off
Adjustable output voltage
Remote sense
Output overvoltage protection
Overtemperature protection
Case ground pin
Auto-restart after overcurrent shutdown
ISO*
9001 Certified manufacturing facilities
UL
†
1950 Recognized,
CSA
‡
22.2 No. 950-95
Certified, and
VDE
§
0805 (EN60950, IEC950)
Licensed
CE mark meets 73/23/EEC and 93/68/EEC
directives
**
n
n
n
n
n
n
n
n
The JAHW Series Power Modules use advanced, surface-
mount technology and deliver high-quality, efficient, and com-
pact dc-dc conversion.
n
n
n
n
Applications
n
n
n
n
Distributed power architectures
Workstations
Computer equipment
Communications equipment
n
n
n
n
n
Options
n
n
Heat sinks available for extended operation
Choice of remote on/off logic configuration
n
Description
The JAHW050A and JAHW075A Power Modules are dc-dc converters that operate over an input voltage range
of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The outputs are fully isolated from the inputs,
allowing versatile polarity configurations and grounding connections. The modules have maximum power rat-
ings from 50 W to 75 W at a typical full-load efficiency of 90%.
The sealed modules offer a metal baseplate for excellent thermal performance. Threaded-through holes are pro-
vided to allow easy mounting or addition of a heat sink for high-temperature applications. The standard feature set
includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power applications.
*
ISO
is a registered trademark of the International Organization for Standardization.
†
UL
is a registered trademark of Underwriters Laboratories, Inc.
‡
CSA
is a registered trademark of Canadian Standards Association.
§
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should
be followed. (The CE mark is placed on selected products.)
ETC [ ETC ]
