KPT01A10-6PW全新原装原理图各脚功能电路原理芯片引脚定义-中国IC网-芯三七

KPT/KPSE/KPTC Connectors

In Accordance with VG95328

We Connect

When it matters most

For more than a century, ITT Cannon has developed innovative interconnect solutions for the world’s harshest environ-

ments. With facilities in the United States, Germany, Italy, Mexico, China and Japan, each with its unique strengths, we offer our

customers interconnect solutions that are truly Engineered for Life.

In addition to this truly global footprint, we offer highly specialized, segmented industry expertise. We have a proven track record as

an industry leader in harsh-environment applications. This has equipped us with the knowledge needed to continue to produce

the most resilient, reliable connectors for our customers’ most challenging conditions.

Interconnect solutions for the

h_Ka_eyr_Fs_eath_ure_esst environments.

• Simple to install and maintain

• Hand insertable contacts

• No wedge locks or blind seals required

The ITT Cannon difference

• From 2 way to 24-way layouts

• Global capabilities & local support

• Up to IP69K sealing

• Proven application expertise

• Utilizes Trident Contacts

• A century of interconnect leadership

• Positive locking latch & polarization key

• A committed innovator & business partner

• Excellent cost/performance ratio

About ITT

ITT is a diversified leading manufacturer of highly engineered

critical components and customized technology solutions

for the energy, transportation and industrial markets.

Building on its heritage of innovation, ITT partners with its

customers to deliver enduring solutions to the key industries

that underpin our modern way of life. Founded in 1920,

ITT is headquartered in White Plains, N.Y., with employees in

more than 35 countries and sales in a total of approximately

125 countries. For more information, visit www.itt.com.

2

www.ittcannon.com

lndustrial / lnstrumentation

Defense Vehicles

Medical

Rail

Oil & Gas

Commercial & Military Aerospace

Our connector portfolio

remains the most extensive

Heavy Equipment

in the industry, offering a reliable and cost

effective range of interconnect solutions

3

www.ittcannon.com

Introduction to KPSE/KPT/KPTC

ITT Cannon’s KPSE / KPT and KPTC series of miniature positive bayonet locking

connectors offer a range of high-density signal solutions. They are designed

according to MIL-DTL-26482 Series I or VG95328 – details below. Next to the

original use in military vehicles these connector series have become a standard

for Industrial uses as eg. off-road vehicles, sensors, factory equipment and other

heavy industry applications.

All three product lines have specific characteristics and provide a set of unique variants, however, all lines are

fully intermateable with each other as well as any other connector series designed to MIL-DTL 26482 Series I

or VG95238 standards.

Product Series

Origin

VG 95328 Approved

MIL-DTL 26482 Series I Approved

KPSE

KPT

German make/origin

US make/origin

Yes

No

German make/origin

US make/origin

KPT

KPTC

German make/origin

KPSE is the high-performance crimp contact solution featuring a

clip-in retention system for fast and simple assembly. ITT Cannon

is approved to offer this line with VG marking according to

VG95328.

Common features of KPSE / KPT / KPTC:

➤ Intermateability with all product lines designed

to MIL-DTL-26482 Series I

➤ Environmental sealing to IP67 and IP68

➤ ½ turn positive bayonet coupling for quick mating

& unmating

➤ Shielded backshell accessories

➤ A range of RoHS compliant plating alternatives to

Cadmium including Nickel, Zinc Nickel and Zinc

Cobalt versions

KPT is the first of two general duty series, and equipped with

solder pot contacts and glued in contacts. This makes this product

ideal for any prototype solution as well as for military

vehicle applications based on the MIL-DTL-268482 Series I

standard.

KPTC is the second ITT Cannon general duty series with either

crimp or solder pot contact versions. In comparison this series

comes with a simpler design and avoids the high-performance

clip-in solution of KPSE as well as the glued contact assembly

of KPT which makes this line a good choice for many Industrial

applications.

➤ Customizing options

Both KPTC as well as KPT add typical Industrial back shells to

their portfolio.

This document solely applies to European manufactured KPT / KPSE / KPTC products.

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

4

www.ittcannon.com

Contact Principle

CONTACT & SEALING PRINCIPLE

1

2

3

KPSE uses a three piece insulator stack up consisting of

1 - rubber insulator

2 - plastic wafer / retaining clips

3 - ubber grommet to seal individual wires

4 - two piece machined contact with retaining clip

4

Rubber insulator (1) and grommet (3) together with the front sealing ring provide

the sealing in mated condition as well as the sealing of individual wires protruding

through the grommet.

Contact retention is provided using a two piece contact with retaining clip. The stiff

plastic wafer or individual metal clips provide the specified contact retention. A good

tactile response is given when contacts are pushed in the final assembly position.

Contacts are installed from the rear by hand or with an insertion tool to ease assembly.

Contact removal is done with an extraction tool from the front.

1

2

KPT uses a rubber insulator and sealing grommet

1 - rubber insulator

2 - rubber grommet to seal individual wires

3 - one piece machined contact

3

Rubber insulator (1) and grommet (2) together with the front sealing ring provide the

sealing in mated condition as well as the sealing of individual wires protruding through

the grommet.

Contact retention is provided by form fit of the machined contact in the rubber

insulator. Additionally, glue is applied to secure contacts in the exact mounting

position. KPT is equipped with solder pot contacts only and pre installed by the factory.

1

2

KPTC uses a rubber insulator and sealing grommet

1 - rubber insulator

2 - rubber grommet to seal individual wires

3 - one piece machined contact

3

Rubber insulator (1) and grommet (2) together with the front sealing ring

provide the sealing in mated condition as well as the sealing of individual wires

protruding through the grommet.

Contact retention is provided by form fit of the machined contact in the rubber

insulator. Solder pot contacts are pre-installed by the factory, crimp contacts are

delivered separately. Glue is not applied to KPTC connectors.

Contacts are installed from the rear with an insertion tool.

Contact removal is done with an extraction tool from the front.

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

5

www.ittcannon.com

Table of contents

Contact and sealing principle ................................5

How to use this catalogue......................................7

Product overview ...................................................8

Panel cutouts .......................................................10

Ordering reference...............................................11

Contact arrangements..........................................14

Alternate insert positions......................................17

Wall mounting receptacles...................................18

Cable connecting plugs........................................21

Box mounting receptacles ....................................23

Thru-bulkhead receptacles....................................24

Straight plugs ......................................................24

Jam nut receptacles..............................................28

Right angle plugs.................................................31

Receptacles with PCB solder pins ..........................32

Accessories and tooling

Protective caps.....................................................33

Dummy receptacle ...............................................35

Cross reference lists .............................................36

Tools and accessories ...........................................37

Product safety information...................................40

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

6

www.ittcannon.com

How to use

This catalog is split in several sections that help you to

• get a general overview of all product lines (product overview)

• create a product part number step by step

(ordering reference)

• get all required detail information (dimensions, product details)

• get all required support products (accessories, tooling)

The fastest way to find your product of choice is to follow these steps

Select your product using the “ordering reference” option

Add accessories and tooling as required on the

1

2

3

4

related pages

Use the detail pages to better understand the available

options and choose the best solution for your needs

Use the contact information on the back cover to contact

us for further questions or to get advice on where you can

purchase our products

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

7

www.ittcannon.com

Product overview KPSE (VG95328), KPT, KPTC

Electrical Data

Contact rating at 60°C:

Size

Rated current A

Test current A

Millivolt drop mV

20

16

7,5

Less than 50

13,0

Current Rating

Current rating vs. ambient temperature:

13

12

11

10

9

8

7

Contact #20

Contact #16

6

5

4

3

2

1

0

20

30

40

50

60

70

80

90

100

110

120

130

Ambient Temperature in °C

Comment for contact rating and current rating:

Rated current values shown are the max. current flowing continuously (not intermittently) through one contact pair with

the same cross section with regard to ambient temperature. If multiple contact pairs are loaded into a connector the

current rating curve has to be reduced.

Minimum air & creepage paths:

Contact to contact crimp

Contact to contact solder

Contact to shell

Service Class 1

Service Class 2

1,9 mm

2,8 mm

0,75 mm

1,53 mm

1,0 mm

2,8 mm

Insulation resistance: ~ 5000 MOhm

Operating voltage:

Service class

VG95328

MIL-C-26482

1

2

140 VDC/100 VAC

165 VDC/115 VAC

850 VDC/600 VAC

1400 VDC/1000 VAC

Comment: When connectors in this catalog are used at voltages exceeding > 50VAC / 75VDC safety provisions as defined

in the European low voltage directive 2014/35/EU have to be adhered to. For use in other regions see appropriate local

regulations.

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

8

www.ittcannon.com

Test voltage:

Test voltage

Service class

Vrms

VDC

1

2

1

2

1500

2300

375

2100

3200

535

Service Class 1

21336 M/70,000ft.

550

770

Mechanical data

Ambient temperature: -55°C … 125°C

Environmental sealing:

In mated condition for KPSE, KPT and KPTC product lines:

VG95328 connectors:

IP67 acc. ISO 20653

IP68 (0,2bar / 48h) – see below

According to VG95319 Part 2, Test No. 5.9.2 | For styles A to E and Z1, Z2 and Z3 and gaskets style A only, test pressure 0,2 bar overpressure, test

duartion 48h, test temperature 25±3°C, connector shall be free of moisture

Vibration test acc. VG95328:

Vibration stress 150 m/s², 10 Hz to 2000 Hz

and Random vibration stress, 5 Hz to 500 Hz acc. test 5.52 VG95328-1

Mating cycles: 500

Material:

Shell

Aluminium alloy

- Cadmium, VG approved - ZnCobalt Black - Zinc Cobalt Green

- Zinc Nickel Blue Generation, for non-shielded versions - Nickel

Shell finishes

Insulator

Grommet and seals

Contacts

Polychloroprene

Copper alloy, gold and silver plating

Product line design principles:

KPSE: Clip in crimp contact system, VG approved versions

KPT: Solder contacts, pre-installed and fixed with glue, VG approved versions

KPTC: Crimp contacts for tool insertion OR pre-installed solder contacts (not fixed with glue)

All further details, product line options etc. see following catalog pages

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

9

www.ittcannon.com

PANEL CUTOUTS KPT/KPSE/KPTC

BOX MOUNTING RECEPTACLE

For rear mounting

Shell size

For front mounting

Ø D +0,25/0

R±0,15

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

Ø T+0,3

3,1

8

14,0

17,0

22,0

25,0

28,0

31,0

34,5

37,5

41,0

12,7

16,0

19,0

22,2

25,5

28,5

31,7

35,0

38,0

10

12

14

16

18

20

22

24

3,1

3,6

PANEL THICKNESS

P – Panel thickness

Height of screw head included

Shell size

8

2,2

5,4

10

12

14

16

18

20

22

24

JAM NUT RECEPTACLE

KPT/KPSE

Ø A +0,25/–0

KPT/KPSE

B +0/–0,12

Shell size

8

10

12

14

16

18

20

22

24

14,5

17,7

22,7

25,7

28,8

32,0

35,1

38,4

41,5

13,6

16,8

20,9

24,1

27,2

30,4

33,6

36,8

40,0

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

10

www.ittcannon.com

How to order

Cannon Order reference

KPT/KPSE/KPTC

KP.. 02 E 22–36 P W *

Series

KPSE – Cannon prefix crimp, contacts supplied

KPT – Cannon prefix solder, contacts installed

KPTC – Cannon prefix commercial version, contacts to be ordered separately.

See modification codes for contact options

Shell type (See note below)

Cannon designation omit 0 in case of a mod code and KPTC

00 – wall mounting receptacle

01 – cable connecting plug

see page 18-20

see page 21-23

see page 23-24

see page 24-27

see page 28-30

see page 31

02 – box mounting receptacle (class E only).

06 – straight plug

07 – jam nut receptacle

08 – 90° angle plug

KPTB - thru-bulkhead receptacle

see page 24

Class

A – Endbell with thread, no grommet seal; for jam nut: without endbell

E – Pressure nut and grommet seal - for 90° versions: endbell with thread, and grommet seal

– with modification DN: Endbell for heat shrink boot and grommet seal

– with modification DZ: Endbell for heat shrink boot and grommet seal, shielded

F – Endbell with cable clamp and grommet seal

PG – endbell for PG glands

ME – endbell for metric glands

Shell size

8 – 24

Contact arrangement

see page 14-16

Contact type

P – pin

S – socket

Alternate insert position

W, X, Y and Z (omit for normal position)

see page 17

see page 12

Modification

Note:

* If a modification is used the initial ‚0‘ in the shell style description is omitted e.g. KPT01E10-6P is changed to KPT1E10-6P-DN.

KPTC series does not use the initial ‚0‘ e.g. KPTC6E10-6P-C.

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

11

www.ittcannon.com

Modification Codes

KPT:

KPSE:

KPTC:

Multiple codes can be used in

order of listing below:

Multiple codes can be used in

order of listing below:

Multiple codes can be used in

order of listing below:

Contact

Endbell

Plating

PCB solder pin 0,76 x 7mm

EX

heat shrink boot adapter, grommet seal

DN

DZ

Nickel plating (RoHS compliant)

C

R

(style 02 and 07 only)

shielded, heat shrink boot adapter,

grommet seal

Zinc Cobalt black plating (RoHS

compliant)

PCB solder pin 0,6 x 7mm

EW

(style 02 and 07 only)

without endbell, grommet and ferrule

F42*

Zinc Cobalt green plating (RoHS

compliant)

F

Endbell

Endbell for PG cable gland, class PG only

Zinc Nickel plating (RoHS compliant)

(not for code DZ)

heat shrink boot adapter, grommet seal

DN

DZ

H

D

PG09 thread for connectors

with shell size 10

P9

P11

P13,5

P16

P21

P29

shielded, heat shrink boot

adapter, grommet seal

Cadmium with olive drab chromate

PG11 thread for connectors

with shell size 12

without endbell, grommet and ferrule

F42*

Endbell

PG13,5 thread for connectors

with shell size 14

heat shrink boot adapter, grommet seal

DN

DZ

Endbell for PG cable gland, class PG only

shielded, heat shrink boot adapter,

grommet seal

PG09 thread for connectors

with shell size 10

P9

P11

P13,5

P16

P21

P29

PG16 thread for connectors

with shell size 16

without endbell, grommet and ferrule

F42*

PG11 thread for connectors

with shell size 12

PG21 thread for connectors

with shell size 18, 20, 22

Endbell for PG cable gland, class PG only

PG13,5 thread for connectors

with shell size 14

PG29 thread for connectors

with shell size 24

PG09 thread for connectors

with shell size 10

P9

P11

P13,5

P16

P21

P29

PG16 thread for connectors

with shell size 16

PG11 thread for connectors

with shell size 12

Endbell for Metric cable gland, class ME only

PG21 thread for connectors

with shell size 18, 20, 22

M12 thread for connectors

with shell size 10

M12

PG13,5 thread for connectors

with shell size 14

PG29 thread for connectors

with shell size 24

M16 thread for connectors

with shell size 12

M16

M20

M25

M32

PG16 thread for connectors

with shell size 16

M20 thread for connectors

with shell size 16

Endbell for Metric cable gland, class ME only

PG21 thread for connectors

with shell size 18, 20, 22

M12 thread for connectors

with shell size 10

M12

M25 thread for connectors

with shell size 18, 20

PG29 thread for connectors

with shell size 24

M16 thread for connectors

with shell size 12

M16

M20

M25

M32

M32 thread for connectors

with shell size 22, 24

Endbell for Metric cable gland, class ME only

M20 thread for connectors

with shell size 16

M12 thread for connectors

with shell size 10

Plating (Cadmium with olive drab chromate

plating is standard - without code;

Alternative platings below)

M12

M25 thread for connectors

with shell size 18, 20

M16 thread for connectors

with shell size 12

M16

M20

M25

M32

Zinc Cobalt, black plating (RoHS

compliant)

A232

M32 thread for connectors

with shell size 22, 24

M20 thread for connectors

with shell size 16

Zinc Nickel plating (RoHS compliant)

(not for code DZ)

A240

Plating (Cadmium with olive drab chromate

plating is standard - without code;

Alternative platings below)

M25 thread for connectors

with shell size 18, 20

Zinc Cobalt, green plating

(RoHS compliant)

A233

A34

M32 thread for connectors

with shell size 22, 24

Zinc Cobalt, black plating (RoHS

compliant)

A232

Nickel plating (RoHS compliant)

Contact

Zinc Nickel plating (RoHS compliant)

(not for code DZ)

Contact

A240

Connector supplied with solder

pot contacts installed

Connector without contacts

F0

MA

MB

EX

Zinc Cobalt, green plating (RoHS

compliant)

A233

A34

An example using these modifications:

KPSE7F16-8S-A240-F0

Connector supplied with crimp contacts

Nickel plating (RoHS compliant)

PCB solder pin 0,76 x 7mm

(style 02 and 07 only)

* Note: Modification -F42 can only be used with Styles

0, 1, 6, 7 and 8. See details on pg 13

An example using these modifications:

KPT2E10-6P-EW-A232

PCB solder pin 0,6 x 7mm

(style 02 and 07 only)

EW

* Note: Modification -F42 can only be used with Styles

0, 1, 6, 7 and 8. See details on pg 13

An example using these modifications:

KPTC6F14-18P-H-MB

* Note: Modification -F42 can only be used with Styles

0, 1, 6, 7 and 8. See details on pg 13

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

12

www.ittcannon.com

Endbell Modification -F42

Below table shows the different threads that come with the respective shell sizes when

choosing the modification -F42 (no endbell/grommet seal).

This modification is only applicable to styles 0 (wall mounting receptacle), 1 (cable

connecting plug), 6 (straight plug), 7 (jam nut receptacle) and 8 (90° angle plug). The only

exception being KP*7A, as this combination already has no endbell/grommet.

Shell size

Thread

8

7/16-28UNEF

9/16-24UNEF

11/16-24UNEF

10

12

14

16

18

20

22

24

13/16-20UNEF

15/16-20UNEF

1-1/16-18UNEF

1-3/16-18UNEF

1-5/16-18UNEF

1-7/16-18UNEF

Drawing shows KP*1 Style

How to order

VG Order reference

Specification

VG95328 A 18–1 S N

Shell type

see page 36

A – wall mounting receptacle with straight endbell

B – wall mounting receptacle with cable clamp

C – box mounting receptacle

D – jam nut receptacle

E – jam nut receptacle with cable clamp

J – straight plug with adapter DN

K – straight plug with cable clamp

M – straight plug, version DZ

R – wall mounting receptacle, version DZ

S – jam nut receptacle with adapter DN

Shell size 8, 10, 12, 14, 16, 18, 20, 22 and 24

Contact arrangements

see page 14-16

see page 17

Contact type P – pin S – socket

Alternate insert position

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

13

www.ittcannon.com

CONTACT ARRANGEMENTS

Contact arrangements

Contact size

AWG

Insulator position

View on mating face

No. of contacts

Service rating

of pin insulator

W

X

Y

Z

–

8-2 ꢀ

20

1

58

122

210

–

2

3

8-3 ꢀ

20

1

60

–

8-3A ꢀ

20

3

8-33 ꢀ

20

1

90

45

90

–

3

4

8-4 ꢀ

20

10-6 ꢀ

20

6

7

10-7 ꢀ

20

1

90

–

10-98 ꢀ

20

1

2

1

90

–

180

240

180

203

270

6

3

8

12-3 ꢀ

16

–

12-8 ꢀ

20

90

112

292

12-10 ꢀ

20

1

2

1

60

40

43

155

92

270

184

–

295

273

–

10

14

5

12-14 ꢀ

20

14-5 ꢀ

16

14-12 ꢀ

20(8)

90

12

16(4)

Legend KPT KPSE ꢀKPTC ꢀauthorized per VG95328

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

14

www.ittcannon.com

CONTACT ARRANGEMENTS

Contact arrangements

Contact size

AWG

Insulator position

View on mating face

No. of contacts

Service rating

of pin insulator

W

X

Y

Z

14-15 ꢀ

20(14)

16(1)

1

17

110

90

165

–

155

180

315

–

234

15

18

19

5

14-18 ꢀ

20

1

2

1

2

15

30

–

270

–

14-19 ꢀ

20

14-22 ꢀ

12(4)

20(1)

–

14A4 ꢀ

–

4

Coax RG188U

(not for receptacle

shell style 02)

16-8 ꢀ

16

54

158

60

62

85

152

–

180

–

331

–

8

16-23 ꢀ

20(22)

16(1)

23

26

11

32

16-26 ꢀ

20

–

275

241

222

338

340

265

18-11 ꢀ

16

119

138

18-32 ꢀ

20

Legend KPT KPSE ꢀKPTC ꢀauthorized per VG95328

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

15

www.ittcannon.com

CONTACT ARRANGEMENTS

Contact arrangements

Contact size

AWG

Insulator position

View on mating face

No. of contacts

Service rating

of pin insulator

W

X

Y

Z

–

20A6 ꢀ

12

Note: contacts are 1 grounding pin and 4

standard size 12 pins

2

90

180

318

145

144

126

135

144

135

142

180

270

333

215

252

225

175

216

264

226

270

5

20-16 ꢀ

16

2

1

2

1

238

70

63

45

16

72

39

30

90

347

290

333

w–

16

24

39

41

21

36

41

55

61

20-24 ꢀ

20

20-39 ꢀ

20(37)

16(2)

20-41 ꢀ

20

22-21 ꢀ

16

349

288

–

22-36 ꢀ

20

22-41 ꢀ

20(27)

16(14)

1

2

22-55 ꢀ

20

1

314

324

24-61 ꢀ

20

Legend KPT KPSE ꢀKPTC ꢀauthorized per VG95328

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

16

www.ittcannon.com

ALTERNATE INSERT POSITION

Degree of Rotation

Contact

arrangements

The diagram indicates alternate insert

positions.

The six positions N, V, W, Y, Z differ in

degree of rotation for various sizes and

arrangements. For the exact degree of

rotation, for the list of contact arrangements

Shell size

No. of contacts

V

–

W

58

60

90

45

90

–

X

Y

Z

–

2

3

8-2

8-3

122

210

–

3

8-3A

–

8

3

8-33

–

and for alternate positions available, refer to

4

8-4

–

the table at the right.

6

10-6

–

10

12

7

10-7

–

6

10-98

12-3

180

–

240

180

203

270

–

270

–

3

8

12-8

90

60

–

112

155

–

292

295

–

10

14

4

12-10

12-14

14A4

14-5

5

40

43

17

15

30

–

92

184

–

273

–

12

15

18

19

5

14-12

14-15

14-18

14-19

14-22

16-8

90

14

110

90

155

180

315

–

234

270

–

165

–

8

54

158

60

62

85

90

238

70

63

45

16

72

39

30

90

52

180

–

331

–

16

18

23

26

11

32

5

16-23

16-26

18-11

18-32

20A6*

20-16

20-24

20-39

20-41

22-21

22-36

22-41

22-55

24-61

–

275

241

222

270

333

215

252

225

175

216

264

226

270

338

340

265

–

119

138

180

318

145

144

126

135

144

135

142

180

16

24

39

41

21

36

41

55

61

347

290

333

–

20

349

288

–

22

24

314

324

* This contact arrangement features five contacts size 12. Four standard contacts and one is a first-to-mate contact.

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

17

www.ittcannon.com

WALL MOUNTING RECEPTACLES KPT00A / KPSE00A / KPTC0A

Description: Wall Mounting

Receptacle with an endbell with

thread, no grommet seal.

Ø A

+0,03 – 0,13

K

±0,1

M

±0,15

R

S

max.

Ø T

±0,15

Ø DA

min.

LA

max.

VTHD

Thread Type 2A

Shell size

±0,15

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

3,05

3,75

8,5

38,0

43,1

1/2-28UNEF

5/8-24UNEF

10

12

14

16

18

20

22

24

11,8

15,0

17,9

21,1

24,1

26,5

30,4

32,8

3/4-20UNEF

7/8-20UNEF

1-20UNEF

1-3/16-18UNEF

1-7/16-18UNEF

WALL MOUNTING RECEPTACLES KPT00E / KPSE00E / KPTC0E

Description: Wall Mounting

Receptacle with pressure nut

and grommet seal.

Ø A

+0,03 – 0,13

K

±0,1

M

±0,15

R

S

max.

Ø T

±0,15

Ø BE

max.

LE

max.

Shell size

±0,15

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

3,05

3,75

14,2

17,2

20,4

23,4

26,6

29,6

32,8

36,0

39,2

32,5

34,5

10

12

14

16

18

20

22

24

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

18

www.ittcannon.com

WALL MOUNTING RECEPTACLES KPT00F / KPSE00F / KPTC0F

Description: Wall Mounting

Receptacle with endbell, cable

clamp and grommet seal.

Ø A

+0,03 – 0,13

K

±0,1

M

±0,15

R

S

max.

Ø T

±0,15

Ø GF

min.

H^F

max.

L^F

max.

Shell size

±0,15

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

3,05

3,75

2,9

4,5

19,3

20,8

24,4

27,2

28,7

35,3

39,9

43,2

56,0

61,0

10

12

14

16

18

20

22

24

7,7

9,3

12,4

15,6

18,8

20,1

WALL MOUNTING RECEPTACLES KPT0E / KPSE0E / KPTC0E … DN

Description: Wall Mounting

Receptacle with endbell for heat

shrink boot and grommet seal.

Ø A

+0,03 – 0,13

K

±0,1

M

±0,15

R

S

max.

Ø T

±0,15

Ø D2

–0,5

L1

max.

L2

±0,5

Shell size

±0,15

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

21,0

24,2

26.6

29,0

31,3

33,7

36,9

40,1

43,3

3,05

3,75

15,6

18,4

23,7

24,5

29,8

32,0

36,1

38,5

41,6

35,0

37,0

42,0

12,2

14,5

15,8

14,9

10

12

14

16

18

20

22

24

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

19

www.ittcannon.com

WALL MOUNTING RECEPTACLES KPT0E/KPSE0E/KPTC0E… DZ

Description: Wall Mounting Receptacle

with endbell for heat shrink boot and

grommet seal, shielded.

Ø A

+0,03–0,13

Ø B

min.

Ø C

±0,5

Ø D

max.

E

±1,0

K

±0,1

L

M

±0,15

R

S

max.

Ø T

±0,15

Shell size

max.

±0,15

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

6,6

16,0

18,0

22,0

25,0

28,0

32,0

34,0

38,0

41,0

13,3

16,1

20,0

22,2

26,2

28,5

32,5

34,8

37,9

15,0

17,0

18,0

1,9

2,2

52,0

53,0

58,0

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,7

34,9

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

3,05

3,75

10

12

14

16

18

20

22

24

9,2

12,2

15,2

18,3

20,0

23,0

26,0

28,8

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

20

www.ittcannon.com

CABLE CONNECTING PLUGS KPT01A / KPSE01A / KPTC1A

Description: Cable connecting

plug with an endbell with

thread, no grommet seal.

Ø A

+0,03 – 0,13

K

±0,1

M

±0,15

S

max.

Ø Y

±0,15

Ø DA

min.

LA

max.

VTHD

Thread Type 2A

Shell size

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

11,6

14,25

15,1

20,6

23,8

26,15

28,5

30,7

33,3

36,5

39,5

42,8

23,8

26,9

29,3

31,7

34,1

36,5

39,6

42,8

46,0

8,5

38,0

43,1

1/2-28UNEF

5/8-24UNEF

10

12

14

16

18

20

22

24

11,8

15,0

17,9

21,1

24,1

26,5

30,4

32,8

3/4-20UNEF

7/8-20UNEF

1-20UNEF

1-3/16-18UNEF

1-7/16-18UNEF

CABLE CONNECTING PLUGS KPT01E / KPSE01E / KPTC1E

Description: Cable connecting

plug with pressure nut and

grommet seal.

Ø A

+0,03 – 0,13

K

±0,1

M

±0,15

S

max.

Ø Y

±0,15

Ø BE

max.

LE

max.

Shell size

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

11,6

14,25

15,1

20,6

23,8

26,15

28,5

30,7

33,3

36,5

39,5

42,8

23,8

26,9

29,3

31,7

34,1

36,5

39,6

42,8

46,0

14,2

17,2

20,4

23,4

26,6

29,6

32,8

36,0

39,2

32,5

34,5

10

12

14

16

18

20

22

24

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

21

www.ittcannon.com

CABLE CONNECTING PLUGS KPT01F / KPSE01F / KPTC1F

Description: Cable connecting

plug with endbell, cable clamp

and grommet seal.

Ø A

+0,03 – 0,13

K

±0,1

M

±0,15

S

max.

Ø Y

±0,15

Ø GF

min.

HF

max.

LF

max.

Shell size

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

11,6

14,25

15,1

20,6

23,8

26,15

28,5

30,7

33,3

36,5

39,5

42,8

23,8

26,9

29,3

31,7

34,1

36,5

39,6

42,8

46,0

2,9

4,5

19,3

20,8

24,4

27,2

28,7

35,3

39,9

43,2

56,0

61,0

10

12

14

16

18

20

22

24

7,7

9,3

12,4

15,6

18,8

20,1

CABLE CONNECTING PLUGS KPT1E / KPSE1E / KPTC1E … DN

Description: Cable connecting

plug with endbell for heat shrink

boot and grommet seal.

Ø A

+0,03 – 0,13

K

±0,1

M

±0,15

S

max.

Ø Y

±0,15

Ø D2

–0,5

L1

max.

L2

±0,5

Shell size

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

11,6

14,25

15,1

20,6

23,8

26,15

28,5

30,7

33,3

36,5

39,5

42,8

23,8

26,9

29,3

31,7

34,1

36,5

39,6

42,8

46,0

15,6

18,4

23,7

24,5

29,8

32,0

36,1

38,5

41,6

35,0

37,0

42,0

12,2

14,5

15,8

14,9

10

12

14

16

18

20

22

24

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

22

www.ittcannon.com

CABLE CONNECTING PLUGS KPT1E/KPSE1E/KPTC1E…DZ

Description: Cable connecting

plug with endbell for heat shrink

boot and grommet seal, shielded.

Ø A

+0,03–0,13

M

±0,15

Ø B

min.

Ø C

±0,5

Ø D

max.

E

±1,0

K

±0,1

L

S

max.

Ø Y

max.

Shell size

max.

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

11,6

6,6

9,2

16,0

18,0

22,0

25,0

28,0

32,0

34,0

38,0

41,0

13,3

16,1

20,0

22,2

26,2

28,5

32,5

34,8

37,9

15,0

17,0

18,0

1,9

2,2

52,0

53,0

58,0

18,5

23,0

29,0

29,5

32,0

35,0

38,5

42,0

46,0

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

10

12

14

16

18

20

22

24

11,6

12,2

15,2

18,3

20,0

23,0

26,0

28,8

11,6

14,25

BOX MOUNTING RECEPTACLES KPT02E/KPSE02E/KPTC2E

Description: box mounting

receptacle with through holes

in flange.

KPT/KPSE/KPTC

KPT/KPTC

Ø A

+0,03–0,13

L

Ø N

max.

K

±0,1

M

±0,15

R

S

max.

Ø T

Z

max.

Shell size

max.

±0,15

3,05

3,75

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

21,1

22,7

11,1

14,3

17,5

20,6

23,8

27,0

30,2

33,4

36,5

1,9

2,2

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

12,3

10,8

10,0

10

12

14

16

18

20

22

24

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

23

www.ittcannon.com

THRU-BULKHEAD RECEPTACLES KPTB

Description: Bulkhead receptacle

with mounting flange – with

through holes.

Socket on

this side

Pin on

this side

INSERT:For example: KPTB14-19PS

Ø A

+0,03 – 0,13

K

±0,1

L

max

M

±0,25

T

max

R

S

max.

Ø X

±0,5

Shell size

±0,15

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,8

2,5

28,6

31,9

14,5

17,7

6,0

9,2

8,0

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

3,05

3,75

10

12

14

16

18

20

22

24

STRAIGHT PLUGS KPT06A / KPSE06A / KPTC6A

Description: Straight plug with

an endbell with thread, no

grommet seal.

Ø G

max.

Ø DA

min.

LA

max.

VTHD

Thread Type 2A

Shell size

8

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

8,5

42,0

45,0

1/2-28UNEF

5/8-24UNEF

10

12

14

16

18

20

22

24

11,8

15,0

17,9

21,1

24,1

26,5

30,4

32,8

3/4-20UNEF

7/8-20UNEF

1-20UNEF

1-3/16-18UNEF

1-7/16-18UNEF

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

24

www.ittcannon.com

STRAIGHT PLUGS KPT06E / KPSE06E / KPTC6E

Description: Straight plug with

pressure nut and grommet seal.

Ø G

max.

Ø BE

max.

LE

max.

Shell size

8

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

14,2

17,2

20,4

23,4

26,6

29,6

32,8

36,0

39,2

32,5

34,5

10

12

14

16

18

20

22

24

STRAIGHT PLUGS KPT06F / KPSE06F / KPTC6F

Description: Straight plug

with endbell, cable clamp and

grommet seal.

Ø G

max.

Ø GF

min.

HF

max.

LF

max.

Shell size

8

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

2,9

4,5

19,3

20,8

24,4

27,2

28,7

35,3

39,9

43,2

56,0

59,0

10

12

14

16

18

20

22

24

7,7

9,3

12,4

15,6

18,8

20,1

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

25

www.ittcannon.com

STRAIGHT PLUGS KPT6E / KPSE6E / KPTC6E … DN

Description: Straight plug with

endbell for heat shrink boot and

grommet seal.

Ø G

max.

Ø D2

–0,5

L1

max.

L2

±0,5

Shell size

8

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

15,6

18,4

23,7

24,5

29,8

32,0

36,1

38,5

41,6

35,0

37,0

42,0

12,2

14,5

15,8

14,9

10

12

14

16

18

20

22

24

STRAIGHT PLUGS KPT6E/KPSE6E/KPTC6E…DZ

Description: Straight plug with

endbell for heat shrink boot and

grommet seal, shielded.

Ø B

min.

Ø C

+0,5

Ø G

max.

Ø D

max.

E

1,0

L

S

+0,2

Shell size

max.

8

6,6

9,2

16,0

18,0

22,0

25,0

28,0

32,0

34,0

38,0

41,0

19,1

22,0

26,2

29,4

32,8

35,4

39,0

42,1

45,2

13,3

16,1

20,0

22,2

26,2

28,5

32,5

34,8

37,9

15,0

17,0

18,0

48,0

49,0

53,0

17,00

19,00

23,00

26,00

29,00

33,00

35,00

39,00

42,00

10

12

14

16

18

20

22

24

12,2

15,2

18,3

20,0

23,0

26,0

28,8

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

26

www.ittcannon.com

STRAIGHT PLUG KPT6PG/KPTC6PG

Description: Straight plug with

adapter for PG gland nut.

Gland nut is not included.

Ø G

max.

Ø B

max.

C

min.

LPG

max.

Shell size

PGTHD

10

12

14

16

18

20

22

24

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

19,0

22,5

25,0

28,0

32,5

34,5

38,0

40,5

10,5

11,5

58,5

73,0

76,0

82,0

PG09

PG11

PG13,5

PG16

PG21

PG29

STRAIGHT PLUG KPT6ME/KPTC6ME

Description: Straight plug with

adapter for ME gland nut.

Gland nut is not included.

Ø G

max.

Ø B

max.

C

min.

LME

max.

Shell size

Metric Thread

10

12

14

16

18

20

22

24

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

19,0

22,5

25,0

28,0

32,5

34,5

38,0

40,5

10,5

11,5

58,5

73,0

76,0

82,0

M12x1,5

M16x1,5

M20x1,5

M20 x 1,5

M25x1,5

M32x1,5

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

27

www.ittcannon.com

JAM NUT RECEPTACLES KPT07A / KPTC7A

Description: Jam nut receptacle

without endbell.

T Panel Thickness

Ø A

+0,03 – 0,13

F

H

±0,15

K

M

±0,15

RTHD

Thread Type 2A

S

max.

Ø N

max.

Z

max.

Shell size

±0,15

±0,25

min.

1,6

max.

3,5

6,5

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

13,3

16,5

20,6

23,8

26,9

30,1

33,3

36,5

39,6

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

3,2

4,0

17,7

22,5

23,3

9/16-24UNEF

11/16-24UNEF

7/8-20UNEF

24,0

27,0

32,0

35,0

38,5

41,5

46,0

49,5

52,5

28,0

31,0

36,0

39,0

42,0

45,0

50,0

55,0

57,0

7,9

4,7

3,8

10

12

14

16

18

20

22

24

1-20UNEF

1-1/8-18UNEF

1-1/4-18UNEF

1-3/8-18UNEF

1-1/2-18UNEF

1-5/8-18UNEF

JAM NUT RECEPTACLES KPT07E / KPSE07E / KPTC7E

Description: Jam nut receptacle

with pressure nut and grommet

seal.

T Panel Thickness

Ø A

+0,03 – 0,13

F

H

±0,15

K

M

±0,15

RTHD

Thread Type 2A

S

max.

Ø N

max.

Ø BE

max.

LE

max.

Shell size

±0,15

±0,25

min.

1,6

max.

3,5

6,5

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

13,3

16,5

20,6

23,8

26,9

30,1

33,3

36,5

39,6

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

3,2

4,0

17,7

22,5

23,3

9/16-24UNEF

11/16-24UNEF

7/8-20UNEF

24,0

27,0

32,0

35.0

38,5

41,5

46,0

49,5

52,5

28,0

31,0

36,0

39,0

42,0

45,0

50,0

55,0

57,0

18,2

21,5

24,6

27,8

31,0

34,1

38,1

41,3

44,5

33,5

39,0

10

12

14

16

18

20

22

24

1-20UNEF

1-1/8-18UNEF

1-1/4-18UNEF

1-3/8-18UNEF

1-1/2-18UNEF

1-5/8-18UNEF

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

28

www.ittcannon.com

JAM NUT RECEPTACLES KPT07F / KPSE07F / KPTC7F

Description: Jam nut receptacle

with endbell, cable clamp and

grommet seal.

T Panel Thickness

Ø A

+0,03 – 0,13

F

H

K

M

RTHD

Thread Type 2A

S

max.

Ø N

max.

LF

max.

Ø GF

max.

HF

max.

Shell size

±0,15 ±0,15 ±0,25 ±0,15

min.

1,6

max.

3,5

6,5

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

13,3

16,5

20,6

23,8

26,9

30,1

33,3

36,5

39,6

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

3,2

4,0

17,7

22,5

23,3

9/16-24UNEF

11/16-24UNEF

7/8-20UNEF

24,0

27,0

32,0

35,0

38,5

41,5

46,0

49,5

52,5

28,0

31,0

36,0

39,0

42,0

45,0

50,0

55,0

57,0

44,9

48,4

50,3

2,9

4,5

19,3

20,8

24,4

27,2

28,7

35,3

39,9

43,2

10

12

14

16

18

20

22

24

7,7

1-20UNEF

9,3

1-1/8-18UNEF

1-1/4-18UNEF

1-3/8-18UNEF

1-1/2-18UNEF

1-5/8-18UNEF

12,4

15,6

18,8

20,1

JAM NUT RECEPTACLES KPT7E / KPSE7E / KPTC7E … DN

Description: Jam nut receptacle

with endbell for heat shrink

boot and grommet seal.

T Panel Thickness

Ø A

+0,03 – 0,13

F

H

K

M

RTHD

Thread Type 2A

S

max.

Ø N

max.

L1

max.

L2

±0,15

Ø D2

max.

Shell size

±0,15 ±0,15 ±0,25 ±0,15

min.

1,6

max.

3,5

6,5

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

13,3

16,5

20,6

23,8

26,9

30,1

33,3

36,5

39,6

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

3,2

4,0

17,7

22,5

23,3

9/16-24UNEF

11/16-24UNEF

7/8-20UNEF

24,0

27,0

32,0

35,0

38,5

41,5

46,0

49,5

52,5

28,0

31,0

36,0

39,0

42,0

45,0

50,0

55,0

57,0

43,0

45,5

52,6

51,6

12,2

14,5

15,8

14,9

15,6

18,4

23,7

24,5

29,8

32,0

36,1

38,5

41,6

10

12

14

16

18

20

22

24

1-20UNEF

1-1/8-18UNEF

1-1/4-18UNEF

1-3/8-18UNEF

1-1/2-18UNEF

1-5/8-18UNEF

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

29

www.ittcannon.com

JAM NUT RECEPTACLES KPT7E/KPSE7E/KPTC…DZ

Description: Jam nut receptacle

with endbell for heat shrink boot

and grommet seal, shielded.

Ø A

min.

Ø B

+0,5

Ø C

max.

Ø D

max.

E

±1,0

L

S

T

Shell size

max.

±0,25

8

10

12

14

16

18

20

22

24

6,6

16,0

18,0

22,0

25,0

28,0

32,0

34,0

38,0

41,0

18,2

21,4

24,6

27,8

30,9

34,1

38,1

41,3

44,4

13,3

16,1

20,0

22,2

26,2

28,5

32,5

34,8

37,9

15,0

17,0

18,0

47,0

49,0

50,0

55,0

23,0

27,0

31,7

34,9

38,1

41,3

46,0

49,2

52,3

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

9,2

12,2

15,2

18,3

20,0

23,0

26,0

28,8

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

30

www.ittcannon.com

RIGHT ANGLE PLUG KPT08A/KPSE08A/KPTC8A

Description: Plug with 90° endbell

without cable clamp, no grommet seal.

Ø G

max.

LA

max.

DA

max.

VTHD

Thread Type 2A

Shell size

8

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

36,1

38,3

40,9

41,6

42,5

44,7

48,3

52,1

20,9

21,7

23,3

24,9

26,5

28,1

29,6

31,7

33,6

1/2-28UNEF

5/8-24UNEF

10

12

14

16

18

20

22

24

3/4-20UNEF

7/8-20UNEF

1-20UNEF

1-3/16-18UNEF

1-7/16-18UNEF

RIGHT ANGLE PLUG KPT08E / KPSE08E / KPTC8E

Description: Plug with 90° endbell without

cable clamp, with grommet seal.

Ø G

max.

LE

max.

DE

max.

VTHD

Thread Type 2A

Shell size

8

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

36,1

38,3

40,9

41,6

42,5

44,7

48,3

52,1

20,9

21,7

23,3

24,9

26,5

28,1

29,6

31,7

33,6

1/2-28UNEF

5/8-24UNEF

10

12

14

16

18

20

22

24

3/4-20UNEF

7/8-20UNEF

1-20UNEF

1-3/16-18UNEF

1-7/16-18UNEF

RIGHT ANGLE PLUG KPT08F / KPSE08F / KPTC8F

Description: Plug with 90° endbell with

cable clamp and grommet seal.

Ø G

max.

L

DF

max.

LF

max.

Shell size

max.

8

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

47,0

49,5

53,5

55,5

57,0

62,5

67,0

71,5

74,0

31,4

32,2

35,4

38,6

40,2

41,8

43,4

47,9

49,9

36,1

38,3

40,9

41,6

42,5

44,7

48,3

52,1

10

12

14

16

18

20

22

24

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

31

www.ittcannon.com

BOX MOUNTING RECEPTACLE KPT2/KPTC2…EX OR EW

Description: Box mounting receptacle with

PCB solder pins:

EX – PCB solder pin 0,76 x 7mm

EW – PCB solder pin 0,6 x 7mm

Ø A

+0,03–0,13

K

±0,1

L

M

±0,15

Ø N

max.

R

S

max.

Ø T

±0,15

Shell size

max.

±0,15

8

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,9

2,2

21,1

22,7

11,60

14,25

15,10

11,1

14,3

17,5

20,6

23,8

27,0

30,2

33,4

36,5

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,7

34,9

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

3,05

3,75

10

12

14

16

18

20

22

24

JAM NUT RECEPTACLES KPT7/KPTC7…EX OR EW

Description: Jam nut receptacle with

PCB solder pins:

EX – PCB solder pin 0,76 x 7mm

EW – PCB solder pin 0,6 x 7mm

T (Panel Thickness)

Ø A

+0,03–0,13

F

H

±0,15

K

M

±0,15

RTHD

S

Ø N

max.

Shell size

±0,15

±0,25

Thread Type 2A

9/16-24UNEF

11/16-24UNEF

7/8-20UNEF

±0,5

24,0

27,0

32,0

35,0

38,5

41,5

46,0

49,5

52,5

min.

1,6

max.

3,5

8

12,0

15,0

19,1

22,2

25,4

28,6

31,8

34,9

38,1

13,3

16,5

20,6

23,8

26,9

30,1

33,3

36,5

39,6

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

3,2

4,0

17,7

22,5

23,3

28,0

31,0

36,0

39,0

42,0

45,0

50,0

55,0

57,0

10

12

14

16

18

20

22

24

1,6

3,5

6,5

1-20UNEF

1-1/8-18UNEF

1-1/4-18UNEF

1-3/8-18UNEF

1-1/2-18UNEF

1-5/8-18UNEF

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

32

www.ittcannon.com

PROTECTIVE CAPS KPT/KPSE/KPTC

HOW TO ORDER

KPT80- 10 D- A34

KPTC80- 10 C- C

Series

KPT80 – for plug

KPT81 – for receptacle

KPTC80 – for plug

KPTC81 – for receptacle

Shell size

8–24

Termination

D – Nylon cord 400 mm

C – Nylon cord and endlink

N - Nylon cord with ring (KPTC81 only)

Clip and end link attached (not assembled)

Crimp tool for end link: M317 (selector position 6)

C – sash chain and terminal link

CB – Nylon cord and terminal link

N – chain with ring (KPT81 only)

NB – Nylon cord with ring (KPT81 only)

Modification

C – Nickel plated (RoHS compliant)

D – Cadmium plated

R – Zinc cobalt, black (RoHS compliant)

F – Zinc cobalt, green (RoHS compliant)

H – Zinc nickel plating (RoHS compliant)

Modification

A34 – Nickel plated (RoHS compliant)

A232 – Zinc cobalt, black (RoHS compliant)

A233 – Zinc cobalt, green (RoHS compliant)

A240 – Zinc nickel plating (RoHS compliant)

(without code) – Olive drab chromate over cadmium

VG95328 Z2

C

10

VG Specification

Style

Z1 – for receptacle

Z2 – for plug

Z3 – for jam nut receptacle

Termination

A – chain and terminal link

B - for Z1 and Z2:

Nylon cord and terminal link

C – for Z1 and Z2:

Nylon cord 400 mm and end link

Clip and end link attached (not mounted)

Crimp tool for end link: M317 (selector position 6)

C – for Z3: Nylon cord with ring

Shell size

8–24

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

33

www.ittcannon.com

PROTECTIVE CAPS KPT/KPSE/KPTC

Cap with end link (not assembled)

For receptacle

KPT81 termination D

VG95328 Z1 termination C

For plug

KPT80 termination D

VG95328 Z2 termination C

Cap with terminal link

For receptacle

KPT81 termination C (with chain) and CB (with nylon cord)

VG95328 Z1 termination A (with chain)

For plug

KPT80 termination C (with chain) and CB (with nylon cord)

VG95328 Z2 termination A (with chain)

Cap with ring

For receptacle

KPT81 termination N (with chain) and NB (with nylon chord)

VG95328 Z3 termination C (with nylon cord)

Ø A

max.

L1

max.

Ø B

max.

L2

max.

H

max.

Ø N

±0,5

Shell size

8

18,26

21,44

25,40

28,58

31,75

34,92

38,10

41,28

44,45

19,84

21,44

22,22

18,0

20,3

25,1

28,2

31,5

34,5

37,8

40,9

44,2

21,44

22,22

76

14,7

17,9

22,6

25,8

29,0

32,2

35,3

38,5

41,7

10

12

14

16

18

20

22

24

89

101

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

34

www.ittcannon.com

DUMMY RECEPTACLES KPT/KPSE/KPTC

HOW TO ORDER

Below the order reference for Dummy Receptacles KPT series (can be mated with KPSE or KPTC connectors)

and separately for VG95328. The table contains the available shell sizes with their respective dimensions.

KPT

15-

8

A

VG95328 T07

C

8

Series

Dummy receptacle

Style (back side closed)

Shell size

Dummy receptacle

Shell size

Flange

A – Standard

Ø A

+0,03–0,13

K

±0,4

M

±0,15

R

S

max.

Ø T

±0,15

Shell size

±0,15

KPT-15-8A

KPT-15-10A

KPT-15-12A

KPT-15-14A

KPT-15-16A

KPT-15-18A

KPT-15-20A

KPT-15-22A

KPT-15-24A

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

1,6

12,1

15,1

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

3,05

3,75

1,6

2,4

12,1

14,5

15,4

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

GASKETS

Shell Size

Alu-Flex Conductive

Chloroprene non conductive

Shell Size

Alu-Flex Conductive

Chloroprene non conductive

8

075-8543-000

075-8543-001

075-8543-002

075-8543-003

075-8543-004

075-8543-010

075-8543-011

075-8543-012

075-8543-013

075-8543-014

18

20

22

24

075-8543-005

075-8543-006

075-8543-007

075-8543-008

075-8543-015

075-8543-016

075-8543-017

075-8543-018

10

12

14

16

WIRE HOLE FILLERS

Contact Size

Colour code

Cannon

20

16

Red

Blue

225-1012-000

225-1011-000

225-0072-000

225-0018-000

12*

Yellow

Coaxial 14a4*

*KPSE only

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

35

www.ittcannon.com

CROSS REFERENCE LIST KPT/KPSE/VG95328/MIL-C-26482

All three product lines have specific characteristics and provide a set of unique variants, however, all lines are fully

intermateable with each other as well as any other connector series designed according to MIL-DTL 26482 Series I

or VG95238 standards.

Solder

MIL-DTL-26482-Style

MS3110E

Crimp

MIL-DTL-26482-Style

MS3120E

ITT Cannon

KPT00E

VG95328

ITT Cannon

KPSE00E

VG95328

VG95328A

VG95328B

KPT00F

MS3110F

KPSE00F

MS3120F

KPT0E-DN

KPT0E-DZ

KPT01A

KPT01E

KPSE0E-DN

KPSE0E-DZ

KPSE01A

KPSE01E

VG95328R

MS3111E

MS3111F

MS3121E

MS3121F

KPT01F

KPSE01F

KPT1E-DN

KPT1E-DZ

KPT02E

KPSE1E-DN

KPSE1E-DZ

KPSE02E

MS3112E

VG95328H

MS3122E

VG95328C

KPT06A

KPT06E

KPSE06A

KPSE06E

MS3116E

MS3116F

MS3126E

MS3126F

KPT06F

KPSE06F

VG95328K

VG95328J

VG95328M

KPT6E-DN

KPT6E-DZ

KPT07A

KPT07E

KPSE6E-DN

KPSE6E-DZ

KPSE07A

KPSE07E

MS3114E

MS3114F

MS3124E

MS3124F

VG95328D

VG95328E

VG95328S

KPT07F

KPSE07F

KPT7E-DN

KPT7E-DZ

KPT08E

KPSE7E-DN

KPSE7E-DZ

KPSE08E

KPT08F

KPSE08F

KPTB

MS3119

VG95328P

CROSS REFERENCE LIST PROTECTIVE CAPS KPT/ VG95328/MIL-C-26482

This table shows which commercial protective caps are available per VG95328. Additionally, it can be

used when cross-referencing a MS protective cap for a KPT (ITT Cannon) substitute.

Part No.

ITT Cannon

Part No.

MIL-DTL-26482-Style

Part No.

VG95328

KPT80..C

KPT80..CB

KPT80..D

KPT81..C

KPT81..CB

KPT81..D

KPT81..N

KPT81..NB

MS3180..C

MS3181..C

MS3181..N

VG95328Z2A..

VG95328Z2B..

VG95328Z2C..

VG95328Z1A..

VG95328Z1B..

VG95328Z1C..

VG95328Z3C..

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

36

www.ittcannon.com

TOOLS AND ACCESSORIES KPT/KPSE/KPTC

Hand crimping tool M22520/1-01 and Locator: Order No.: 995-0001-585

This universal tool features just one crimp locator

with different adjustments for crimping contacts.

The tool provides an 8-indent crimp.

Note: The locator needs to be purchased separately:

Descripton Locator

M22520/1-02

Name

Locator

Order-No.

995-0001-736

995-0001-585

Contact Size

12

16

20

M22520/1-01

Hand Crimp Tool

Pneumatic crimping tool WA27F-CE:

Pneumatic operated crimp tool for higher

volume production. A pedal for foot

operation can also be provided.

The tool provides an 8-indent crimp

equivalent to hand crimping tool.

Gauge

Crimp tool and Bench mount

Foot pedal

Description

Pneumatic crimp tool (AWG12-20)

Bench mount

Name

WA27F-CE

BM-2A

Order No.

121586-5067

121586-5068

121586-5069

995-0001-684

Foot pedal

WA10A

Gauge

M22520-3-1

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

37

www.ittcannon.com

Insertion Tools

To insert crimped contacts into the insulator insertion tools are required.

KPSE

Description

Name

Order No.

insertion tool for contact size # 20

MS24256-A20

MS24256-A16

MS24256-A12

995-0001-950

995-0001-951

995-0001-913

Insertion Tool

insertion tool for contact size # 16

insertion tool for contact size # 12

KPTC

Description

Name

CITG-20A

CIT-KPTC-20

CIT-16

Order No.

121086-3104

121086-3101

121086-3008

121086-0097

121086-3105

317-1153-000

Insertion Tool

CIT-KPTC-20

insertion tool for contact size # 20

insertion pliers for contact size # 20

insertion tool for contact size # 16

insertion pliers for contact size # 16

insertion TIP for insertion tool # 20

insertion TIP for insertion tool # 16

CIT-F80-16

CITG-20A-TIP

CIT-16-TIP

CIT-F80-16

Extraction Tools

In case a contact has to be exchanged the following extraction tools are to be used:

KPSE

Description

Name

Order No.

Replacement-TIP

317-7130-000

317-7129-000

317-7131-000

121586-0046

extraction tool for contact size # 20

extraction tool for contact size # 16

extraction tool for contact size # 12

extraction tool for coax contacts (KPT14A4)

MS24256-R20

MS24256-R16

MS24256-R12

CET-C6B

995-0001-965

995-0001-964

995-0001-966

070064-0000

Extraction tool

Extraction tool for coax contacts

KPTC

Description

Name

Order No.

121086-3212

121086-3277

Replacement-TIP

317-8668-000

317-8649-025

extraction tool for contact size # 20

extraction tool for contact size # 16

CET-KPTC-20

CET-KPTC-16

Extraction tool

Notes

1. For insertion and extraction of the contacts and for connector assembly, see Assembly Instructions CAS25098E

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

38

www.ittcannon.com

Pipe Wrench

Soft Jaw Adjustable Pliers for tightening the endbell housing.

Order No.: 550014-1644

Dimensions for Single Conductor and Wire Stripping

In order to assure proper function according to connector specification, especially concerning water tightness, the

diameter of the wire insulation must correlate with the following data:

KPSE

KPTC

Insulation dimensions

Waterproof / Ø mm

Insulation dimensions

Waterproof / Ø mm

Contact Size Conductor dimensions

AWG

mm²

min.

1.4

max.

2.15

2.7

AWG

mm²

0,2 – 0,75

0,5 – 2,0

-

min.

1.3

1.8

2.5

max.

2.1

20

16

24 - 18

20 - 14

0,2 – 0,75

0,5 – 2,0

20

16

12

24 - 18

20 - 14

14 - 12

1.6

2.7

3.4

Contacts

KPTC

Termination

For shell size 8 and contact layout 12 – 14 only

Contact order reference

Contact

size

Contact type

AWG

mm²

Contact order reference

430-8588-029

20

28 - 24

0,08 – 0,20

Socket

Gold plating

Silver plating

031-8704-508

031-8704-509

031-8704-506

24 – 18

0,20 – 0,75

0,5 – 1,0

0,5 – 2,0

430-8560-404

430-8560-411

430-8560-410

Socket

430-8588-031

-

20

16

-

430-8588-030

Socket

031-8704-502

20– 14

430-8560-406

KPSE / VG95328

Termination

Contact order reference

Contact size

Contact type

AWG

mm²

KPSE version

031-8704-203

430-8560-006

031-8704-000

430-8560-004

031-8704-012

430-8560-016

430-8560-020

VG95328 version

Socket with insulation support

031-8704-203

20

16

24 - 18

0,2 - 0,75

0,5 - 2,0

Pin with insulation support

430-8560-006

Socket

031-8704-000

24 - 14

14 - 12

430-8560-004

Socket

-

12

2,0

Grounding Pin

KPT14A4

Termination

Cable type

Contact order

reference

Contact size

Contact type

Receptacle

Plug

DM 53742-5001

DM 53740-5001

Coaxial

RG187/U, RG188/U

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

39

www.ittcannon.com

PRODUCT SAFETY INFORMATION

1. MATERIAL CONTENT AND PHYSICAL FORM

to be damaged.

Electrical connectors do not usually contain hazardous materials.

They contain conducting and non-conducting materials and can be

divided into two groups.

4. DISPOSAL

Incineration of certain materials may release noxious or even

toxic fumes.

a) Printed circuit types and low cost audio types which employ all

plastic insulators and casings.

5. APPLICATION

b) Rugged, Fire Barrier and High Reliability types with metal casings

and either natural rubber, synthetic rubber, plastic or glass

insulating materials. Contact materials vary with type of connector

and also application and are usually manufactured from either:

Copper, copper alloys, nickel, alumel, chromel or steel. In special

applications, other alloys may be specified.

Connectors with exposed contacts should not be selected for use on

the current supply side of an electrical circuit, because an electric

shock could result from touching exposed contacts on an unmated

connector. Voltages in excess of 30V ac or 42.5V DC are

potentially hazardous and care should be taken to ensure that such

voltages cannot be transmitted in any way to exposed metal parts

of the connector body. The connector and wiring should be

checked, before making live, to have no damage to metal parts or

insulators, no solder blobs, loose strands, conducting lubricants,

swarf, or any other undesired conducting particles. Circuit

resistance and continuity check should be made to make certain

that there are no high resistance joints or spurious conducting

paths. Always use the correct application tools as specified in the

Data Sheet/Catalog. Do not permit untrained personnel to wire,

assemble or tamper with connectors. For operation voltage please

see appropriate national regulations.

2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD

There is no fire hazard when the connector is correctly wired and

used within the specified parameters.

Incorrect wiring or assembly of the connector or careless use of

metal tools or conductive fluids, or transit damage to any of the

component parts may cause electric shock or burns. Live circuits

must not be broken by separating mated connectors as this may

cause arcing, ionization and burning. Heat dissipation is greater at

maximum resistance in a circuit. Hot spots may occur when

resistance is raised locally by damage, e.g. cracked or deformed

contacts, broken strands of wire. Local overheating may also result

from the use of the incorrect application tools or from poor quality

soldering or slack screw terminals.

IMPORTANT GENERAL INFORMATION

(i) Air and creepage paths/Operating voltage. The admissible

operating voltages depend on the individual applications and the

valid national and other applicable safety regulations. For this

reason the air and creepage path data are only reference values.

Observe reduction of air and creepage paths due to PC board and/

or harnessing.

Overheating may occur if the ratings in the product Data Sheet/

Catalog are exceeded and can cause breakdown of insulation and

hence electric shock. If heating is allowed to continue it intensifies

by further increasing the local resistance through loss of temper of

spring contacts, formation of oxide film on contacts and wires and

leakage currents through carbonization of insulation and tracking

paths. Fire can then result in the presence of combustible materials

and this may release noxious fumes. Overheating may not be

visually apparent. Burns may result from touching overheated

components.

(ii) Temperature

All information given are temperature limits. The operation

temperature depends on the individual application.

(iii) Other important information

Cannon continuously endeavors to improve their products.

Therefore, Cannon products may deviate from the description,

technical data and shape as shown in this catalog and data sheets.

ITT Cannon manufactures the highest quality products available in

the marketplace; however these products are intended to be used in

accordance with the specifications in this publication. Any use or

application that deviates from the stated operating specifications is

not recommended and may be unsafe. No information and data

contained in this publication shall be construed to create any

liability on the part of Cannon. Any new issue of this publication

shall automatically invalidate and supersede any and all

previous issues.

3. HANDLING

Care must be taken to avoid damage to any component parts of

electrical connectors during installation and use. Although there are

normally no sharp edges, care must be taken when handling certain

components to avoid injury to fingers.

Electrical connectors may be damaged in transit to the customers,

and damage may result in creation of hazards. Products should

therefore be examined prior to installation/use and rejected if found

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

40

www.ittcannon.com

Amazing things

happen when great

things connect

41

www.ittcannon.com

Notes

_____________________________________________________________________________________________________________________

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

42

www.ittcannon.com

Notes

_____________________________________________________________________________________________________________________

Dimensions shown in mm|Specifications and dimensions subject to change

This document solely applies to European manufactured KPT / KPSE / KPTC products

43

www.ittcannon.com

Connect with your ITT Cannon representative today

or visit us at www.ittcannon.com

Connect with the experts

ITT's Cannon brand is a world leader in the design and manufacture of

highly engineered connector solutions for multiple end markets.

North America

Europe

Asia

56 Technology Drive

Irvine, CA 92618 USA

Phone: +1.800.854.3028

Cannonstrasse 1

71384 Weinstadt, Germany

Phone: +49.7151.699.0

Corso Europa 41/43

20020 Lainate (MI), Italy

Phone: +39.02938721

Tuopandun Industrial Area, Jinda Cheng,

Xiner Village, Shajing Town, Boan District,

Shenzhen City, Guangdong Province, China 518215

Phone: +86.755.2726.7888

The “ITT Engineered Blocks“ symbol, “Engineered for life”, “ITT” and “Cannon“ are registered trademarks of ITT Inc.

Specification and other data are based on information available at the time of printing, and are subject to change without notice.

ITT Cannon KPx Catalog 042018

型号:	KPT01A10-6PW
是否Rohs认证：	不符合
生命周期：	Active
IHS 制造商：	ITT CANNON
Reach Compliance Code：	compliant
风险等级：	2.4
Is Samacsys：	N
其他特性：	STANDARD: MIL-DTL 26482
后壳类型：	SOLID
主体/外壳类型：	PLUG
连接器类型：	MIL SERIES CONNECTOR
联系完成配合：	NOT SPECIFIED
触点性别：	MALE
触点材料：	NOT SPECIFIED
DIN 符合性：	NO
空壳：	NO
滤波功能：	NO
IEC 符合性：	NO
MIL 符合性：	YES
混合触点：	NO
安装类型：	CABLE
选件：	WATER PROOF
外壳面层：	CHROMATE PLATED
外壳材料：	ALUMINUM ALLOY
外壳尺寸：	10
端接类型：	SOLDER
触点总数：	6
Base Number Matches：	1

电子百科

产品导航

产品型号KPT01A10-6PW的Datasheet PDF文件预览

KPT01A10-6PW相关产品

KPT01A10-6PW相关文章

IC37:专业IC行业平台