MIC37302WR原理图各脚功能电路原理芯片引脚定义引脚图及功能-中国IC网-芯三七

当前位置：IC37首页_>M字母起始型号索引_>M字母起始型号索引第964页更新时间：2024-12-03 15:03:10

产品型号MIC37302WR的概述

芯片MIC37302WR的概述 MIC37302WR是一种高性能的电压调节器，主要用于提供稳定的电源输出。该芯片由Microchip Technology Inc.设计和生产，广泛应用于通信、工业控制、消费电子等领域。MIC37302WR具有高效率、超低静态功耗等优点，能够满足现代电子设备对于电源管理的严格要求。芯片MIC37302WR的详细参数 MIC37302WR的工作电压范围为2.8V至5.5V，适用于多种电源应用。芯片的输出电压可以通过外部电阻分压网络灵活设定，通常在1.2V至3.6V之间。此外，MIC37302WR支持最大输出电流为200mA，非常适合需要低功耗的便携设备。该芯片的静态功耗极低，典型值为几微安，使其在待机模式下具有良好的能源效率。在动态性能方面，MIC37302WR具有快速的响应时间和良好的负载调整能力，这使得它能够在应用中保持稳定的输出电压，减少电压波动...

产品型号MIC37302WR的Datasheet PDF文件预览

MIC37300/01/02/03

3.0A, Low-Voltage µCap LDO Regulator

General Description

Features

The Micrel MIC37300/01/02/03 is a 3.0A low-dropout

linear voltage regulator that provides a low-voltage,

high-current output with a minimum number of external

components. It offers high precision, ultra-low-dropout

(500mV overtemperature), and low-ground current.

• 3.0A minimum guaranteed output current

• 500mV maximum dropout-voltage overtemperature

–

Ideal for 3.0V to 2.5V conversion

–

Ideal for 2.5V to 1.8V, 1.65V, or 1.5V conversion

• Stable with ceramic or tantalum capacitor

• Wide input voltage range

The MIC37300/01/02/03 operates from an input of

2.25V to 6.0V. It is designed to drive digital circuits

requiring low-voltage at high currents (i.e., PLDs, DSP,

microcontroller, etc.). It is available in ﬁxed and

adjustable output voltages. Fixed voltages include 1.5V,

1.8V, 2.5V and 3.3V. The adjustable version is capable

of 1.24V to 5.5V.

–

VIN: 2.25V to 6.0V

• +1.0% initial output tolerance

• Fixed and adjustable output voltages:

–

MIC37300—3-pin ﬁxed voltages

MIC37301—5-pin S-Pak or 8-pin e-Pad SOIC

ﬁxed voltages with ﬂag

Features of the MIC37300/01/02/03 LDO include

thermal and current-limit protection, and reverse-current

protection. Logic enable and error ﬂag pins are available

on the 5-pin version.

–

MIC37302—5-pin adjustable voltage

MIC37303—8-pin e-Pad SOIC adjustable

voltage with flag

• Excellent line and load regulation speciﬁcations

• Thermal shutdown and current-limit protection

• Reverse-leakage protection

Junction temperature range of the MIC37300/01/02/03

is from–40°C to +125°C.

For applications requiring input voltage greater than

6.0V, see the MIC3910x, MIC3915x, MIC3930x, and

MIC3950x LDOs.

• Low proﬁle S-Pak package

Data sheets and support documentation can be found

on Micrel’s web site at www.micrel.com.

Applications

• LDO linear regulator for low-voltage digital IC

• PC add-in cards

• High-efﬁciency linear power supplies

• SMPS post regulator

• Battery charger

Typical Application

MIC37300

MIC37302

V_IN= 3.0V

V_OUT= 2.5V

V_IN

1.3V

VIN

VOUT

VIN

VOUT

C_OUT

47µF, Ceramic

C_IN

C_OUT

47µF, Ceramic

VEN

ADJ

GND

Fixed 2.5V Regulator

Adjustable Regulator

Super ßeta PNP is a registered trademarks of Micrel, Inc.

Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

MIC37301

Dropout vs.

Output Current

V_IN= 3.0V

C_IN

V_OUT= 2.5V

VIN

VOUT

500

450

400

350

300

250

200

150

100

100k

C_OUT

47µF, Ceramic

VEN

FLG

2.5V_OUT

GND

3.3V_OUT

Fixed 2.5 Regulator with Error Flag

0.5

1.5

2.5

OUTPUT CURRENT (A)

Ordering Information

Part number

Output

Current

Voltage

Junction Temp. Range

Package

Standard

RoHS Compliant* /

Pb-Free

MIC37300-1.5BR

MIC37300-1.65BR

MIC37300-1.5WR*

MIC37300-1.65WR*

3.0A

1.5V

–40°C to +125°C

S-Pak-3

1.65V

MIC37300-1.8BR

MIC37300-2.5BR

MIC37300-3.3BR

MIC37300-1.8WR*

MIC37300-2.5WR*

MIC37300-3.3WR*

1.8V

2.5V

3.3V

–40°C to +125°C

S-Pak-3

MIC37301-1.5YME

MIC37301-1.5WR*

1.5V

–40°C to +125°C

e-Pad SOIC-8

S-Pak-5

MIC37301-1.5BR

MIC37301-1.8BR

MIC37301-1.8YME

MIC37301-1.8WR*

MIC37301-2.5YME

MIC37301-2.5WR*

MIC37301-3.3WR*

MIC37302WR*

1.8V

2.5V

3.3V

ADJ

–40°C to +125°C

e-Pad SOIC-8

S-Pak-5

e-Pad SOIC-8

S-Pak-5

MIC37301-2.5BR

MIC37301-3.3BR

MIC37302BR

S-Pak-5

MIC37302BU

MIC37302WU*

TO-263-5

e-Pad SOIC-8

MIC37303YME

* RoHS compliant with ‘high-melting solder’ exemption.

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Pin Configuration

S-PAK-5 (R)

S-PAK-3 (R)

GND

FLG

FLG/ADJ

VOUT

GND

VIN

VOUT/ADJ

VOUT

VIN

VOUT

TO-263-5 (U)

e-Pad SOIC-8 (ME)

Pin Description

Pin Number

S-PAK-5

TO-263-5

Pin Number

S-PAK-3

Pin Number

Pin Name

Pin Function

e-Pad SOIC-8

Enable Input : CMOS compatible input. Logic high = enable;

Logic low = shutdown.

—

3, 4

VIN

Input voltage which supplies current to the output power

device.

5, 6, 7 (Fixed)

5, 6 (Adj.)

GND

VOUT

FLG

Ground: TAB is connected to ground.

Regulator Output.

5 (Fixed)

5 (Adj.)

Error Flag (Output): Open collector output. Active-low

indicates an output fault condition.

—

ADJ

Adjustable Regulator Feedback Input: Connect to resistor

voltage driver.

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Absolute Maximum Ratings⁽¹⁾

Operating Ratings⁽²⁾

Supply Voltage (V_IN)............................................. 6.5V

Enable Input Voltage (V_EN)⁽³⁾................................ 6.5V

Power Dissipation (P_D)⁽³⁾.................. Internally Limited

Junction Temperature (T_J).......... –40°C ≤ T_J≤ +125°C

Storage Temperature (T_S).......... –65°C ≤ T_J≤ +150°C

Lead Temperature (soldering, 5sec)..................260°C

ESD Rating⁽⁴⁾..........................................................2kV

Supply Voltage (V_IN).................................2.25V to 6.0V

Enable Input Voltage (V_EN)............................0V to 6.0V

Junction Temperature (T_J) ...........–40°C ≤ T_J≤ +125°C

Package Thermal Resistance

S-Pak (θ_JC) .................................................. 2°C/W

TO-263-5 (θ_JC)............................................. 2°C/W

e-Pad SOIC-8 (θ_JC) ................................... 10°C/W

Electrical Characteristics⁽⁵⁾

T_A= 25°C with V_IN= V_OUT+ 1V; V_EN= V_IN; I_L= 10mA; bold values indicate –40°C < T_J< +125°C, unless noted.

Parameter

Conditions

Min

-1

Typ

Max

Units

Output Voltage Accuracy

I_L= 10mA

10mA < I_OUT< I_L(max), V_OUT+ 1 ≤ V_IN≤ 6V

-2

Output Voltage Line Regulation

Output Voltage Load Regulation

V_IN– V_OUTDropout Voltage⁽⁶⁾

V_IN= V_OUT+ 1.0V to 6.0V; I_L= 10mA

I_L= 10mA to 3A

0.02

0.2

0.5

I_L= 1.5A

(e-Pad SOIC-8)

175

350

400

I_L= 3A

(e-Pad SOIC-8)

300

500

550

Ground Pin Current⁽⁷⁾

I_L= 3A

Ground Pin Current in Shutdown V_IL≤ 0.5V, V_IN= V_OUT+1V

1.0

4.75

170

µA

Current Limit

V_OUT= 0V

6.5

500

Start-up Time

V_EN= V_iN, I_OUT= 10mA, C_OUT= 47µF

µs

Enable Input

Enable Input Threshold

Regulator enable

2.25

Regulator shutdown

0.8

Enable pin Input Current

V_IL≤ 0.8V (Regulator shutdown)

µA

V_IH≥ 2.25V (Regulator enable)

Flag Output

I_FLG(LEAK)

V_OH= 6V

µA

V_FLG(LO)

V_FLG

_IN= 2.25V, I_OL= 250µA⁽⁸⁾

210

400

500

Low Threshold, % of VOUT below nominal

Hysteresis

High Threshold, % of VOUT below nominal

99.2

MIC37302 Only

Reference Voltage

1.228

1.215

1.240

1.252

1.265

Adjust Pin Bias Current

120

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Notes:

1. Exceeding the absolute maximum rating may damage the device.

2. The device is not guaranteed to function outside its operating rating.

3. P_D(max)= (T_J(max)– T_A) / θ_JA, where θ_JA, depends upon the printed circuit layout. See “Applicatins Information.”

4. Devices are ESD sensitive. Handling precautions recommended.

5. Specification for packaged product only.

6. V_DO= V_IN– V_OUTwhen V_OUTdecreases to 98% of its nominal output voltage with V_IN= V_OUT+ 1V. For output voltages below 1.75, dropout voltage

specification does not apply due to a minimum input operating voltage of 2.25V.

7. I_GNDis the quiescent current. I_IN= I_GND+ I_OUT

8. For a 2.5V device, V_IN= 2.250V (device is in dropout).

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Typical Characteristics

Power Supply

Rejection Ratio

Power Supply

Rejection Ratio

Dropout vs.

Output Current

500

450

400

350

300

250

200

150

100

V_IN= 2.5V

_OUT= 1.5V

V_IN= 2.5V

_OUT= 1.5V

2.5V_OUT

3.3V_OUT

I_OUT= 3A

C_OUT= 47µF

_IN= 0

_OUT=100µF

_IN= 0

0.5

1.5

2.5

0.01 0.1

100 1000

0.01 0.1

100 1000

OUTPUT CURRENT (A)

FREQUENCY (kHz)

Dropout vs.

Tempetature

Dropout Characteristics

(1.5V)

Dropout Characteristics

(2.5V)

450

400

350

300

250

200

150

100

1.6

1.4

1.2

2.5

10mA Load

2.5V_OUT

0.8

0.6

0.4

0.2

1.5

3A Load

0.5

3A Load

1.9 2.1

-40 -20

20 40 60 80 100 120

1.5

1.7

2.3

2.5

1.5

2.5

3.5

INPUT VOLTAGE (V)

TEMPERATURE(°C)

Dropout Characteristics

(3.3V)

Ground Current

vs. Output Current

Ground Current

vs. Supply Voltage (1.5V)

0.0006

3.5

10mA Load

0.0005

0.0004

0.0003

0.0002

0.0001

100mA

2.5

3A Load

1.5

10mA

0.5

1.5

2.5

3.5

0.5

1.5

2.5

SUPPLY VOLTAGE (V)

INPUT VOLTAGE (V)

OUTPUT CURRENT (A)

Ground Current

vs. Supply Voltage (1.5V)

vs. Supply Voltage (2.5V)

1.4

1.2

0.8

0.6

0.4

0.2

100mA

10mA

SUPPLY VOLTAGE (V)

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Typical Characteristics (continued)

Ground Current

vs. Supply Voltage (3.3V)

Ground Current

vs. Supply Voltage (3.3V)

Ground Current

vs. Temperature

1.4

1.2

0.4

0.35

0.3

2.5V

OUT

0.25

0.2

0.8

0.6

0.4

0.2

100mA

0.15

0.1

0.05

=10mA

10mA

OUT

-40 -20

20 40 60 80 100 120

SUPPLY VOLTAGE (V)

TEMPERATURE (°C)

Ground Current

vs. Temperature

Ground Current

vs. Temperature

Output Voltage

vs. Temperature

2.6

2.5V

OUT

2.55

2.5

2.5V

OUT

2.5V

OUT

2.45

=1.5A

=3A

OUT

2.4

-40 -20

20 40 60 80 100 120

-40 -20

20 40 60 80 100 120

TEMPERATURE(°C)

TEMPERATURE (°C)

Flag Voltage

vs. Flag Current

Short-Circuit Current

vs. Supply Voltage

Short-Circuit Current

vs. Temperature

5.5

4.5

3.5

2.5

1.5

0.5

1.0

0.8

0.6

0.4

0.2

2.5V

3.3V

2.5V

2.25

3.75 4.5 5.25

-40 -20

20 40 60 80 100 120

0.5

1.5

2.5

3.5 4

SUPPLY VOLTAGE (V)

TEMPERATURE (°C)

FLAG CURRENT (mA)

Flag Low Voltage

vs. Temperature

Enable Current

vs. Temperature

Error Flag Pull-Up Resistor

400

350

300

250

200

150

100

Flag High (OK)

2.5V

E N

Flag Low (FAULT)

Flag Current = 250µA

= 5V

0.01 0.1

10 100 1000 10000

-40 -20

20 40 60 80 100 120

-40 -20

20 40 60 80 100 120

TEMPERATURE(°C)

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Functional Characteristics

Load Transient Response

Line Transient Response

V_IN= 3.3V

V_OUT= 2.5V

C_OUT= 47µF Ceramic

3.3V

10mA

TIME (400µs/dvi.)

TIME (100µs/dvi.)

Enable Transient Response

I_OUT= 3A

V_IN= 3.3V

C_OUT= 47µF

2.5V

TIME (40µs/div.)

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Where T_J(max)< 125°C and θ_CSis between 0°C and

2°C/W. The heat sink may be signiﬁcantly reduced in

applications where the minimum input voltage is

known and is large compared with the dropout

voltage. Use a series input resistor to drop excessive

voltage and distribute the heat between this resistor

and the regulator. The low-dropout properties of

Micrel’s Super ßeta PNP® regulators allow signiﬁcant

reductions in regulator power dissipation and the

Applications Information

Enable/Shutdown

The MIC37300/01/02/03 is a high-performance low-

dropout voltage regulator suitable for moderate to

high-current regulator applications. Its 500mV dropout

voltage at full load and over-temperature makes it

especially valuable in battery-powered systems and

as high-efﬁciency noise ﬁlters in post-regulator

applications. Unlike older NPN-pass transistor

designs, there the minimum dropout voltage is limited

by the based-to-emitter voltage drop and collector-to-

emitter saturation voltage, dropout performance of the

PNP output of these devices is limited only by the low

VCE saturation voltage.

associated

heat

sink

without

compromising

performance. When this technique is employed, a

capacitor of at least 1.0µF is needed directly between

the input and regulator ground.

Refer to “Application Note 9” for further details and

examples on thermal design and heat sink

applications.

A trade-off for the low dropout voltage is a varying

base drive requirement. Micrel’s Super ßeta PNP®

process reduces this drive requirement to only 2% to

5% of the load current.

Output Capacitor

The MIC37300/01/02/03 requires an output capacitor

for stable operation. As

µCap LDO, the

The MIC37300/01/02/03 regulator is fully protected

from damage due to fault conditions. Current limiting

is provided. This limiting is linear; output current

during overload conditions is constant. Thermal

shutdown disables the device when the die

temperature exceeds the maximum safe operating

temperature. The output structure of these regulators

allows voltages in excess of the desired output

voltage to be applied without reverse current ﬂow.

MIC37300/01/02/03 can operate with ceramic output

capacitors as long as the amount of capacitance is

47µF or greater. For values of output capacitance

lower than 47µF, the recommended ESR range is

200mΩ to 2Ω. The minimum value of output

capacitance recommended for the MIC37300 is 10µF.

For 47µF or greater, the ESR range recommended is

less than 1Ω. Ultra-low ESR, ceramic capacitors are

recommended for output capacitance of 47µF or

greater to help improve transient response and noise

reduction at high frequency. X7R/X5R dielectric-type

ceramic capacitors are recommended because of

their temperature performance. X7R-type capacitors

change capacitance by 15% over their operating

temperature range and are the most stable type of

ceramic capacitors. Z5U and Y5V dielectric capacitors

change value by as much as 50% and 60%,

respectively, over their operating temperature ranges.

To use a ceramic chip capacitor with Y5V dielectric,

the value must be much higher than an X7R ceramic

capacitor to ensure the same minimum capacitance

over the equivalent operating temperature range.

Thermal Design

Linear regulators are simple to use. The most

complicated design parameters to consider are

thermal characteristics. Thermal design requires the

following application-speciﬁc parameters:

•

Maximum ambient temperature (T_A)

Output current (I_OUT

)

Output voltage (V_OUT

Input voltage (V_IN)

)

Ground current (I_GND

)

First, calculate the power dissipation of the regulator

from these numbers and the device parameters from

this datasheet.

Input Capacitor

An input capacitor of 1.0µF or greater is

recommended when the device is more than 4 inches

away from the bulk supply capacitance, or when the

supply is a battery. Small, surface-mount chip

capacitors can be used for the bypassing. The

capacitor should be place within 1" of the device for

optimal performance. Larger values will help to

improve ripple rejection by bypassing the input to the

regulator, further improving the integrity of the output

voltage.

P_D= (V_IN– V_OUT) I_OUT+ V_INI_GND

where the ground current is approximated by using

numbers from the “Electrical Characteristics” or

“Typical Characteristics.” Then the heat sink thermal

resistance is determined with this formula:

_SA= ((T_J(max)– T_A)/ P_D) – (θ_JC+ θ_CS)

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Transient Response and 3.3V to 2.5V, 2.5V to 1.8V

or 1.65V, or 2.5V to 1.5V Conversions

Enable Input

The MIC37301/02/03 also features an enable input for

on/off control of the device. Its shutdown state draws

“zero” current (only microamperes of leakage). The

enable input is TTL/CMOS compatible for simple logic

interface, but can be connected up to VIN. When

enabled, it draws approximately 15µA.

The MIC37300/01/02/03 has excellent transient

response to variations in input voltage and load

current. The device has been designed to respond

quickly to load current variations and input voltage

variations. Large output capacitors are not required to

obtain this performance. A standard 47µF output

capacitor, preferably tantalum, is all that is required.

Larger values help to improve performance even

further.

Adjustable Regulator Design

MIC37302

V_IN

OUT

V_OUT

C_OUT

By virtue of its low-dropout voltage, this device does

not saturate into dropout as readily as similar NPN-

based designs. When converting from 3.3V to 2.5V,

2.5V to 1.8V or 1.65V, or 2.5V to 1.5V, the NPN-

based regulators are already operating in dropout,

with typical dropout requirements of 1.2V or greater.

To convert down to 2.5V without operating in dropout,

NPN-based regulators require an input voltage of 3.7V

at the very least. The MIC37300/01/02/03 regulator

will provide excellent performance with an input as low

as 3.0V or 2.25V, respectively. This gives the PNP-

based regulators a distinct advantage over older,

NPN-based linear regulators.

ENABLE

SHUTDOWN

ADJ

GND

⎛

⎞

⎟

⎠

V_OUT= 1.240V 1+

⎜

⎝

Figure 1. Adjustable Regulator with Resistors

The MIC37302 and MIC37303 allow programming the

output voltage any-where between 1.24V and the

5.5V maximum operating rating of the family. Two

resistors are used. Resistors can be quite large, up to

1MΩ, because of the very high input impedance and

low bias current of the sense comparator. The resistor

values are calculated by:

Minimum Load Current

The MIC37300/01/02/03 regulator is speciﬁed

between ﬁnite loads. If the output current is too small,

leakage currents dominate and the output voltage

rises. A 10mA minimum load current is necessary for

proper operation.

⎛

⎞

OUT

R1 = R2⎜

− 1⎟

⎜

⎟

1.240

⎝

⎠

Where V_OUTis the desired output voltage. Figure 1

shows component deﬁnition. Applications with widely

varying load currents may scale the resistors to draw

the minimum load current required for proper

operation (see above).

Error Flag

The MIC37301 and MIC37303 feature an error ﬂag

circuit that monitors the output voltage and signals an

error condition when the voltage is 5% below the

nominal output voltage. The error ﬂag is an open-

collector output that can sink 10mA during a fault

condition.

Low output voltage can be caused by a number of

problems, including an overcurrent fault (device in

current limit) or low input voltage. The ﬂag is

inoperative during overtemperature shutdown.

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

Package Information

θ4

θ1

θ2

θ1

θ3

θ1

θ2

θ3

θ4

5-Pin TO-263-5 (U)

5-Pin S-PAK (R)

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

3-Pin S-PAK (R)

8-Pin SOIC (ME)

M9999-102909

October 2009

Micrel, Inc.

MIC37300/01/02/03

MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA

TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http:/www.micrel.com

The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for

its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.

Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a

product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for

surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant

injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk

and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale.

M9999-102909

October 2009

MIC37302WR相关文章

配单直通车

柒号芯城电子商务（深圳）有限公司服务专线: 18922803401 在线联系:

QQ：2881677436 复制

QQ：2881620402 复制

首天国际（深圳）科技有限公司服务专线: 0755-82807802/82807803 在线联系:

QQ：528164397 复制

QQ：1318502189 复制

深圳市芯福林电子有限公司服务专线: 13418564337 在线联系:

QQ：2881495808 复制

QQ：308365177 复制

深圳市中利达电子科技有限公司服务专线: 0755-13686833545 在线联系:

QQ：1902134819 复制

QQ：2881689472 复制

北京元坤伟业科技有限公司服务专线: 010-62104931621064316210489162104791 在线联系:

QQ：857273081 复制

QQ：1594462451 复制

MIC37302WR产品参数

型号:	MIC37302WR
是否Rohs认证：	符合
生命周期：	Active
IHS 制造商：	MICROCHIP TECHNOLOGY INC
包装说明：	ROHS COMPLIANT, SPAK-5
Reach Compliance Code：	not_compliant
ECCN代码：	EAR99
HTS代码：	8542.39.00.01
Factory Lead Time：	8 weeks
风险等级：	1.77
Samacsys Confidence：	4
Samacsys Status：	Released
Samacsys PartID：	531610
Samacsys Pin Count：	6
Samacsys Part Category：	Integrated Circuit
Samacsys Package Category：	Other
Samacsys Footprint Name：	5-PIN S-PAK (R)_1
Samacsys Released Date：	2018-10-11 12:11:22
Is Samacsys：	N
最大回动电压 1：	0.5 V
JESD-30 代码：	R-PSSO-G5
JESD-609代码：	e3
长度：	9.395 mm
湿度敏感等级：	3
功能数量：	1
端子数量：	5
工作温度TJ-Max：	125 °C
工作温度TJ-Min：	-40 °C
最大输出电流 1：	3 A
最大输出电压 1：	5.5 V
最小输出电压 1：	1.24 V
封装主体材料：	PLASTIC/EPOXY
封装代码：	TO-263
封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	260
认证状态：	Not Qualified
调节器类型：	ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR
座面最大高度：	2.16 mm
表面贴装：	YES
端子面层：	Matte Tin (Sn) - annealed
端子形式：	GULL WING
端子节距：	1.7 mm
端子位置：	SINGLE
处于峰值回流温度下的最长时间：	40
宽度：	8 mm
Base Number Matches：	1

电子百科

产品导航

产品型号MIC37302WR的概述

产品型号MIC37302WR的Datasheet PDF文件预览

MIC37302WR相关产品

MIC37302WR相关文章

IC37:专业IC行业平台