(1/3)
Conformity to RoHS Directive
SMD Inductors(Coils)
For Signal Line(Multilayer, Magnetic Shielded)
MLF Series MLF1005L
Various digital devices are required to be further downsized yet
remain highly functional, and to excel in low power consumption,
and parts mounted on the devices are also required to have lower
resistance.
PRODUCT IDENTIFICATION
MLF 1005 R10
(1) (2) (3) (4) (5) (6)
L
K
T
The MLF1005L type is a new line of inductors that have been
developed to meet such requirements: their resistance has been
lowered by up to 35% in comparison with that of the existing
MLF1005 type.
(1) Series name
(2) Dimensions L×W
1005
1.0×0.5×0.5
In addition, the new inductors use similar magnetic shielding,
which enables their high-density mounting.
(3) Material code
L
Low-resistance type
FEATURES
• The resistance of the MLF1005L type has been lowered by up to
35% in comparison with that of the existing MLF1005 type.
• Magnetically shielded configuration allowing for high-density
mounting.
(4) Inductance value
R10
1R0
0.1µH
1.0µH
• Does not contain lead and is compatible with lead-free
soldering.
(5) Inductance tolerance
K
10%
• It is a product conforming to RoHS directive.
(6) Packaging style
T
APPLICATIONS
Taping [reel]
Signal processing modules such as cellular phones and tuners
PACKAGING STYLE AND QUANTITIES
SPECIFICATIONS
Packaging style
Taping
Quantity
10000 pieces/reel
Operating temperature range
Storage temperature range
–40 to +85°C
–40 to +85°C
HANDLING AND PRECAUTIONS
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the tempera-
ture difference between the solder temperature and product
temperature does not exceed 150°C.
10s max.
250 to 260˚C
230˚C
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• The inductance value may change due to magnetic saturation if
the current exceeds the rated maximum.
Natural
cooling
180˚C
150˚C
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed cir-
cuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
001-03 / 20100930 / e511_mlf1005l.fm