AIRCOREINDUCTORS
High-Reliability Air Core Inductors MS43790RAT
■ Small air core inductors feature high Q and tight tolerance.
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Tin-lead (Sn-Pb) terminations ensure the best possible
board adhesion.
Terminations Tin-lead (63/37) over copper.
Ambient temperature –55°C to +125°C with Imax current, +125°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging
MS439RAT: 700/7″ reel Plastic tape: 12 mm wide, 0.32 mm thick,
8 mm pocket spacing, 3.3 mm pocket depth
MS470RAT: 500/7″ reel; Plastic tape: 16 mm wide, 0.28 mm thick,
8 mm pocket spacing, 3.4 mm pocket depth
PCB washing Only pure water or alcohol recommended
SRF DCR
L2 Percent Q3 min4 max5 Imax Weight
Part number1 Turns (nH) tol min (GHz)(mOhm) (A) (mg)
MS439RAT2N5KSZ
MS439RAT5N0_SZ
MS439RAT8N0_SZ
MS439RAT13N_SZ
MS439RAT19N_SZ
1
2
3
4
5
2.5
5.0
8.0
12.5
18.5
10
145 12.5
1.1
1.8
2.6
3.4
3.9
4
4
4
4
4
31
42
52
65
78
5,2 140
5,2 140
5,2 137
5,2 132
6.5
5.0
3.3
2.5
MS470RAT18N_SZ
MS470RAT22N_SZ
MS470RAT28N_SZ
MS470RAT36N_SZ
6
7
8
9
17.5
22.0
28.0
35.5
5,2 100
5,2 102
5,2 105
5,2 112
5,2 106
2.2
2.1
1.8
1.5
1.2
4.5
5.2
6.0
6.8
7.9
4
4
4
4
4
100
110
118
133
147
MS470RAT43N_SZ 10 43.0
1. When ordering, please specify tolerance and testing codes:
MS470RAT43NGSZ
Tolerance: G = 2% J = 5%
Testing:
Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10003
2. Inductance measured at 150 MHz on an Agilent/HP 4286A or equivalent with
a Coilcraft SMD-A test fixture and correlation.
3. Q measured at 150 MHz on an Agilent/HP 4291A or equivalent with a
16193A test fixture or equivalent.
4. SRF measured on an Agilent/HP 8753ES network analyzer or equivalent
with a Coilcraft CCF1268 test fixture. Parts with SRF >5 GHz are verified to
>5 GHz in screening
5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
inches
mm
Dimensions are in
®
Specifications subject to change without notice. Document MS107-1 Revised 09/08/11
Phone 800-981-0363
Fax 847-639-1508
E-mail cps@coilcraft.com
Web www.coilcraft-cps.com
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011