OPL562芯片引脚定义引脚图及功能IC贸易商引脚图技术参数-中国IC网-芯三七

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

Features:

 Choice of four output opꢁons in low-cost side-looking package

 Choice of two sensiꢁvity opꢁons (OPL560/561/562/563)

 High noise immunity

 Direct TTL/LSTTL CMOS interface

 Data rates to 250 kBaud for all except OPL560 series (200 kBaud)

 Low power consumpꢁon

RoHS

Descripꢀon: All components in this series include a photodiode, amplifier, voltage regulator, Schmitt trigger and

NPN output transistor on a single silicon chip. OPL560 chips also include a voltage regulator on the chip. All

devices in the series have a Photologic® chip that is encapsulated in a molded plastic side-looking package with

an integral lens (recessed integral lens for OPL535 and OPL536). This packaging provides enhanced optical

coupling, combined with mechanical protection. The hysteresis characteristics of the Schmitt trigger on each

device offers high immunity to noise on input and V_CC.

OPL530, OPL531, OPL535 and OPL536 include a 10 K Ω pull-up resistor (R_L) from output to V_CC. These

components exhibit very stable performance over supply voltages ranging from 4.5 V to 16 V and a wide range of

irradiance levels. OPL550 and OPL551 devices feature TTL/LSTTL compatible logic level output which can drive

up to 8 TTL loads without additional circuitry and medium-speed data rates to 250 kBaud, with typical rise and fall

times of 25 nanoseconds. OPL560, OPL561, OPL562 and OPL563 devices feature TTL/LSTTL compatible logic

level output which can drive up to 10 TTL loads over supply voltages ranging from 4.5 V to 16 V.

OPL530, OPL531, OPL550, OPL551, OPL560, OPL561, OPL562 and OPL563 are mechanically and spectrally

matched to OP140 and OP240 LEDs. OPL535 and OPL536 are mechanically and spectrally matched to OP145

and OP245 series LEDs.

Applicaꢀons: Non-contact reﬂecꢁve object sensor, Assembly line automaꢁon, Machine automaꢁon, Machine safety, End of travel

sensor, Door sensor

Input Power Range

(mW/cm²) [Min/Max]

Base Part Number

Package

Output Type - with Light

-

A

B

OPL530, OPL530-OC

OPL531A, OPL531-OCA

Internal 10K - High

Internal 10K - Low

Internal 10K - High

Internal 10K - Low

Totem Pole - High

Totem Pole - Low

Totem Pole - High

Totem Pole - Low

Totem Pole - High

Totem Pole - Low

External Lens

0.08/0.40

0.08/0.25

0.20/0.40

OPL535A, OPL535B

Recessed

Lens

OPL536A, OPL536-OC, OPL536-OCA

OPL550, OPL550A, OPL550-OC, OPL550-OCA

OPL551A, OPL551-OC, OPL551-OCA

OPL560, OPL560A, OPL560-OCA

OPL561, OPL561-OC, OPL561-OCA

OPL562, OPL562A, OPL562-OC, OPL562-OCA

OPL563, OPL563-OC, OPL563-OCA

0.25/2.4

0.25/2.5

0.25/1.4

0.25/1.5

N/A

External Lens

0.09/0.55

0.09/0.36

0.025/0.23

0.025/0.14 N/A

OC = Open Collector Output

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

www.optekinc.com | www.ꢀelectronics.com

Issue C 09/2016 Page 1

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

OPL530, OPL550, OPL560 Series

[ MILLIMETERS]

INCHES

DIMENSIONS ARE IN:

Pin #

Sensor

1

2

3

Ground

Output

V_CC

OPL535, OPL536 Series

[ MILLIMETERS]

INCHES

DIMENSIONS ARE IN:

Pin #

Sensor

Ground

Output

V_CC

1

2

3

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

www.optekinc.com | www.ꢀelectronics.com

Issue C 09/2016 Page 2

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563 (-OC, -OCA, -OCB)

OPL550, OPL550A, OPL551A,

OPL560, OPL560A, OPL561, OPL562, OPL562A, OPL563, OPL563A

OPL550/550A/560/560A/562/562A Totem-Pole

OPL530/535/550/560/562 (-OC, -OCA, -OCB) Open-Collector

V_CC

OUT

GND

OPL 551A/561/563/563A Inverted Totem-Pole

OPL 531/536/551/561/563 (-OC, -OCA, -OCB) Inverted Open-Collector

V_CC

OUT

GND

OUT

GND

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ꢀelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

Issue C 09/2016 Page 3

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

OPL530, OPL531A,

OPL535A, OPL535B, OPL536, OPL536A

OPL530, OPL535A/535B 10K Pull-Up

OPL531A, OPL536/536A Inverted 10K Pull-Up

V_CC

OUT

GND

V_CC

OUT

GND

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

www.optekinc.com | www.ꢀelectronics.com

Issue C 09/2016 Page 4

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

Absolute Maximum Raꢀngs (T_A= 25° C unless otherwise noted)

Input Diode

Supply Voltage (V_CC)

OPL530, OPL530-OC, OPL536-OC,

OPL550

OPL560, OPL561, OPL562, OPL563

18 V

10 V

18 V

Operaꢁng Temperature Range

-40° C to + 85° C

-40° C to + 100° C

260°C

Storage Temperature Range

Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]

Sourcing Current

OPL560, OPL561, OPL562, OPL563

10 mA

Power Dissipaꢁon

OPL530, OPL530-OC, OPL536-OC

OPL550, OPL560, OPL561, OPL562, OPL563

90 mW

200 mW⁽²⁾

Sinking Current

OPL530, OPL530-OC, OPL536-OC

OPL550

50 mA

-

OPL560, OPL561, OPL562, OPL563

50 mA

Voltage at Output Lead ⁽⁴⁾

OPL530, OPL530-OC, OPL536-OC

OPL550-OC, OPL551-OC

OPL561-OC, OPL562-OC, OPL563-OC

35 V

Duraꢁon of Output Short to V_CCor Ground

OP550

1 second

Duraꢁon of Output Short to V_CC

OPL550-OC, OPL551-OC

OPL560, OPL561, OPL562, OPL563, OPL561-OC, OPL562-OC, OPL563-OC

1 second

Low Level Output Current

OPL550, OPL551 Series

16 mA

1 mA

High Level Output Current

OPL550, OPL551 Series

Irradiance

OPL550, OPL551 Series

OPL560, OPL561, OPL561-OC

OPL562, OPL562-OC, OPL563, OPL563-OC

10 mW/cm²

9 mW/cm

3 mW/cm²

Notes:

(1) RMA ﬂux is recommended. Duraꢁon can be extended to 10 sec. max. when ﬂow soldering. For OPL530, OPL530-OC, OPL531, OPL531-OC,

OPL535, OPL535-OC, OPL536 and OPL536-OC, a maximum of 20 grams force may be applied to leads while at soldering temperatures.

(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and OPL536-OC. De-

rate linearly 2.5 mW/° C above 25° C for all devices in the OPL550, OPL551, OPL560, OPL561, OPL562 and OPL563 series.

(3) Irradiance measurements are made with λi = 935 nm.

(4) This applies to OC versions only. For I_CCon pull-up versions, add V_CC/10 KΩ.

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ꢀelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

Issue C 09/2016 Page 5

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

Electrical Characterisꢀcs (T_A= 25° C unless otherwise noted)

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

TEST CONDITIONS

Operaꢁng Supply Voltage

OPL530, OPL530-OC, OPL531, OPL531-OC

OPL535, OPL535-OC, OPL536, OPL536-OC,

OPL560, OPL561 Series

4.5

-

16

-

V

OPL550, OPL551 Series

4.5

-

5.5

2

-

Peak-to-Peak V_CCRipple Necessary to Cause False

Triggering of Output

V_CC

OPL530, OPL530-OC, OPL531, OPL531-OC

OPL535, OPL535-OC, OPL536, OPL536-OC

OPL560, OPL561 Series

-

f = DC to 50 MHz

OPL550, OPL551 Series

-

2

-

V

V_CC= 5 V DC, f = DC to 50 MHz

E_E= 0 or 1 mW/cm²

Supply Current⁽⁴⁾

OPL530, OPL530-OC

OPL536-OC

2.7

5

mA

I_CC

E_E= 0 or 3 mW/cm², V_CC= 5.5 V

E_E= 0 or 1 mW/cm²

OPL550, OPL551 Series

-

8

15

12

mA

OPL560, OPL561 Series

Posiꢁve-Going Threshold Irradiance⁽³⁾

OPL530, OPL530-OC

0.08

0.12

-

0.40

0.25

0.40

mW/cm²T_A= 25° C

OPL536-OC

OPL531A, OPL531-OCA

OPL535A, OPL536A, OPL536-OCA

E_eT(+)

OPL535B

OPL550, OPL550-OC, OPL551-OC

OPL550A, OPL550-OCA, OPL551-OCA

.25

-

2.4

1.4

mW/cm²V_CC= 5 V, T_A= 25° C

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

www.optekinc.com | www.ꢀelectronics.com

Issue C 09/2016 Page 6

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

Electrical Characterisꢀcs (T_A= 25° C unless otherwise noted)

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

TEST CONDITIONS

Hysteresis Raꢁo

OP530, OP531 Series

OP535, OP536 Series

OPL550, OPL551 Series

OPL560, OPL561 Series

1.05

1.50

1.20

1.3

1.2

2

1.6

1.5

2.5

2

-

E_eT(+)/E_eT(-)

1.55

Temperature Co-eﬃcient

OPL530, OPL530-OC

-

-0.6

-1.6

-

%/°C

>0°C

<0°C

∆E_et(+)(∆T)

Notes:

OPL536-OC

(1) RMA ﬂux is recommended. Duraꢁon can be extended to 10 sec. max. when ﬂow soldering. For OPL530, OPL530-OC, and

OPL536-OC, a maximum of 20 grams force may be applied to leads while at soldering temperatures.

(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, and OPL536-OC. Derate linearly 2.5 mW/° C above 25° C

for all devices in the OPL550, OPL560, OPL561, OPL562 and OPL563 series.

(3) Irradiance measurements are made with λi = 935 nm.

(4) This applies to OC versions only. For I_CCon pull-up versions, add V_CC/10 KΩ.

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

www.optekinc.com | www.ꢀelectronics.com

Issue C 09/2016 Page 7

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

Electrical Characterisꢀcs (T_A= 25° C unless otherwise noted)

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

TEST CONDITIONS

Operaꢁng Supply Voltage

OPL550

2.4

3.3

-

V

V_CC= 4.5 V, I_OH= -800 µa,

E_E= 3 mW/cm²

V_OH

OPL560

OPL561

V_CC-2.1

-

V

I_OH= -1 µA, E_E= 1 mW/cm²

I_OH= -1 µA, E_E= 0

Low Level Output Voltage

OPL530, OPL530-OC

-

0.2

0.4

V

I_OL= 16 mA, E_E= 0

OPL536-OC

I_OL= 16 mA, E_E= 1 mW/cm²

OPL550

0.25

V_CC= 4.5 V, I_OL= 12.8 mA,

E_E= 0

V_OL

OPL560

-

.4

V

I_OL= 16 mA, E_E= 0

OPL561, OPL561-OC

I_OL= 16 mA, E_E= 1 mW/cm²

Short Circuit Output Current

OPL550

-20

-55

-100

mA

V_CC= 5.5 V, Output = GND,

E_E= 3 mW/cm²

I_OS

High Level Output Current⁽⁴⁾

OPL536-OC

-

0.1

1

10

µA

V_OH= 30 V, E_E= 0

OPL530, OPL530-OC

OPL550-OC

V_OH= 30 V, E_E= 1 mW/cm²

100

V_CC= 4.5 V, V_OH= 30 V,

E_E= 3 mW/cm²

V_CC= 4.5 V, V_OH= 30 V,

E_E= 0

I_OH

OPL551-OC

1

OPL561-OC

-

100

µA

V_OH= 30 V, E_E= 0

Notes:

(1) RMA ﬂux is recommended. Duraꢁon can be extended to 10 sec. max. when ﬂow soldering. For OPL530, OPL530-OC, and OPL536-OC, a

maximum of 20 grams force may be applied to leads while at soldering temperatures.

(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, and OPL536-OC. Derate linearly 2.5 mW/° C above 25° C for all devices in

the OPL550, OPL560, OPL561, OPL562 and OPL563 series.

(3) Irradiance measurements are made with λi = 935 nm.

(4) This applies to OC versions only. For I_CCon pull-up versions, add V_CC/10 KΩ.

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ꢀelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

Issue C 09/2016 Page 8

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

Electrical Characterisꢀcs (T_A= 25° C unless otherwise noted)

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

TEST CONDITIONS

Output Rise Time

OPL530

-

1.5

-

µs

ns

E_E= 0 or 1 mW/cm², C_L= 50 pF

OPL530-OC,

OPL536-OC

50

25

E_E= 0 or 1 mW/cm², RL = 300 Ω to 5 V,

C_L= 50 Pf

-

70

ns

V_CC= 5 V, T_A= 25° C, E_E= 0 or 3 mW/cm²,

f = 10 kHz, DC = 50%

OPL550

t_r

RL = 8 TTL loads

-

25

70

ns

V_CC= 5 V, T_A= 25° C, E_E= 0 or 3 mW/cm²,

f = 10 kHz, DC = 50%,

OPL550-OC, OPL551-OC

R_L= 360 Ω

T_A= 25° C, E_E= 0 or 1 mW/cm²,

f = 10 kHz, DC = 50%,

OPL560, OPL561

-

70

ns

µs

OPL561-OC

100

R_L= 360 Ω

Output Rise Time

OPL530

-

µs

ns

E_E= 0 or 1 mW/cm², C_L= 50 pF

OPL530-OC,

OPL536-OC

E_E= 0 or 1 mW/cm², RL = 300 Ω to 5 V,

C_L= 50 pF

OPL550-OC, OPL551-OC

-

25

70

ns

V_CC= 5 V, T_A= 25° C, E_E= 0 or 3 mW/cm²,

R_L= 8 TTL loads,

t_r

f = 10 kHz, DC = 50%

OPL561-OC

-

V_CC= 5 V, T_A= 25° C, E_E= 0 or 3 mW/cm²,

R_L= 8 TTL loads,

f = 10 kHz, DC = 50%

OPL560, OPL561

-

70

ns

T_A= 25° C, E_E= 0 or 1 mW/cm²,

f = 10 kHz

OPL561-OC

100

T_A= 25° C, E_E= 0 or 1 mW/cm²,

f = 10 kHz

Output Fall Time

OPL530

-

20

-

ns

E_E= 0 or 1 mW/cm², C_L= 50 Pf

OPL530-OC,

OPL536-OC

E_E= 0 or 1 mW/cm², RL = 300 Ω to 5 V,

C_L= 50 pF

V_CC= 5 V, T_A= 25° C, E_E= 0 or 3 mW/cm²,

R_L= 360 Ω, f = 10 kHz, DC = 50%

T_A= 25° C, E_E= 0 or 1 mW/cm²,

f = 10 kHz

t_f

OPL550-OC, OPL551-OC

-

25

70

ns

OPL560, OPL561

-

70

ns

T_A= 25° C, E_E= 0 or 1 mW/cm²,

f = 10 kHz

OPL561-OC

100

Notes:

(1) RMA ﬂux is recommended. Duraꢁon can be extended to 10 sec. max. when ﬂow soldering. For OPL530, OPL530-OC, and OPL536-OC, a maximum of 20 grams

force may be applied to leads while at soldering temperatures.

(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC and OPL536-OC. Derate linearly 2.5 mW/° C above 25° C for all devices in the OPL550, OPL560,

OPL561, OPL562 and OPL563 series.

(3) Irradiance measurements are made with λi = 935 nm.

(4) This applies to OC versions only. For I_CCon pull-up versions, add V_CC/10 KΩ.

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ꢀelectronics.com

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

Issue C 09/2016 Page 9

OPL530, OPL531, OPL535, OPL536, OPL550,

OPL551, OPL560, OPL561, OPL562, OPL563

Electrical Characterisꢀcs (T_A= 25° C unless otherwise noted)

SYMBOL

PARAMETER

MIN

TYP

MAX

UNITS

TEST CONDITIONS

Propagaꢁon Delay

OPL530

-

1.0

2.5

-

µs

E_E= 0 or 1 mW/cm², RL = 300 Ω to 5 V,

C_L= 50 pF

OPL530-OC,

OPL536-OC

E_E= 0 or 1 mW/cm², RL = 300 Ω to 5 V,

C_L= 50 pF

tpE_eT(+)

5

V_CC= 5 V, T_A= 25° C,

OPL550-OC, OPL551-OC

E_E= 0 or 3 mW/cm², R_L= 8 TTL loads, f =

10 kHz, DC = 50%

Propagaꢁon Delay

OPL530,

-

3.0

2.5

-

µs

E_E= 0 or 1 mW/cm², RL = 300 Ω to 5V, C_L

= 50 pF

OPL530-OC,

OPL536-OC

tpE_eT(-)

OPL550-OC, OPL551-OC

5

V_CC= 5 V, T_A= 25° C, E_E= 0 or 3 mW/cm²,

R_L= 360 Ω, f = 10 kHz, DC = 50%

Propagaꢁon Delay (Low-High/High-Low)

OPL560, OPL561

-

5

-

µs

DC = 50%, R_L= 10 TTL Loads

DC = 50%, R_L= 300 Ω

t_PLH, T_PHL

Notes:

OPL561-OC

(1) RMA ﬂux is recommended. Duraꢁon can be extended to 10 sec. max. when ﬂow soldering. For OPL530, OPL530-OC, OPL536, a maximum

of 20 grams force may be applied to leads while at soldering temperatures.

(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and OPL536-OC. De-

rate linearly 2.5 mW/° C above 25° C for all devices in the OPL550, OPL551, OPL560, OPL561, OPL562 and OPL563 series.

(3) Irradiance measurements are made with λi = 935 nm.

(4) This applies to OC versions only. For I_CCon pull-up versions, add V_CC/10 KΩ.

General Note

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

TT Electronics reserves the right to make changes in product speciﬁcaꢁon without

noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is

considered accurate at ꢁme of going to print.

www.optekinc.com | www.ꢀelectronics.com

Issue C 09/2016 Page 10

型号:	OPL562
生命周期：	Contact Manufacturer
Reach Compliance Code：	unknown
风险等级：	5.58
Base Number Matches：	1

电子百科

产品导航

产品型号OPL562的Datasheet PDF文件预览

OPL562相关产品

OPL562相关文章

IC37:专业IC行业平台