QN8005芯片引脚定义引脚图及功能IC贸易商引脚图技术参数-中国IC网-芯三七

产品型号QN8006的Datasheet PDF文件预览

Product Brief QN8006/8006L

High Performance Digital FM Transceiver for Portable Devices

________ General Description ________

__________ Key Features __________

• Worldwide FM Band Receive and Transmit

• 76 MHz to 108 MHz full band tuning in

50/100/200 kHz step sizes

The QN8006 is a high performance, low power, full-

featured single-chip stereo FM transceiver designed for cell

phones, GPS personal navigation devices, portable

audio/video players, and automotive accessories. The

QN8006 covers frequencies from 76 MHz to 108 MHz in

50/100/200 kHz step sizes for worldwide FM band support.

The QN8006 also supports RDS/RBDS data transmit and

receive.

• 50/75μs pre-emphasis and de-emphasis

• Ease of Integration

• Small footprint, 4 x 4 x 0.85mm QFN24

• Only 2 external passive components required

• Adaptive antenna tuning

• Low cellular and GPS band spurs

• High Immunity to TDMA (GSM/GPRS) burst noise

• Multiple crystal frequencies supported

• 2- and 3-wire control interfaces

The QN8006 integrates both FM receiving and transmitting

functions, including RF front-end circuits (PA, LNA, and

channel selective filter), full digital FM modulator/

demodulator, MPX codec, pre-emphasis/de-emphasis and

feature-rich audio processing (audio AGC, soft clipping,

SM, HCC, and SNC). Auto Seek and clear channel scan

functions enable automatic channel selection for best sound

quality. Integrated antenna tuning eases antenna matching

in real applications. The QN8006 provides both digital and

analog audio interfaces. 2-wire and 3-wire digital control

interfaces provide simple access to programmable functions.

• Very Low Power Consumption

• 11.5mA (Transmit Mode), 18.8mA (Receive Mode)

• Integrated voltage regulator, direct connect to battery

• Power saving idle and standby modes

• Low shutdown leakage current

• High Performance FM Receiver (FMR)

• Superior sensitivity 1.4µV_EMF

• 66dB Stereo SNR, 0.03% THD

• High interference rejection

Advanced digital architecture enables superior receiver

sensitivity, crystal clear audio, unsurpassed spectral purity,

ultra-low harmonic and spurious levels, and high immunity

to TDMA burst noise. The QN8006 is ideal for cellular

handsets and GPS personal navigation applications.

• Integrated audio processing (SNC, HCC, SM)

• Auto Seek

• High Performance FM Transmitter (FMT)

• 66dB Stereo SNR, 0.03% THD

• Maximum 124dBuV RF output level with 42dB

adjustable range

The QN8006’s small footprint, high integration with

minimum external component count, and support for

multiple clock frequencies make it easy to integrate into a

variety of small form-factor low-power portable

applications. Integrated low-phase noise digital synthesizers

and extensive on-chip auto calibration ensures robust

consistent performance over temperature and process

variations. An integrated voltage regulator enables direct

connection to a battery and provides high PSRR for superior

noise suppression. A low-power idle mode extends battery

life.

• Integrated Clear Channel Scan

• RDS/RBDS Transmit & Receive

• Supports US and European data service,

including TMC (Traffic Messaging Channel)

(not available in QN8006L)

• Flexible Audio Interfaces

• Digital audio interface supports I²S and a variety of

PCM data formats with 4 different data rates

• Programmable analog audio input/output

• Integrated audio AGC and soft clipping

ESD protection is on all pins. The QN8006 is fabricated in

highly reliable CMOS technology.

• Robust Operation

• -25⁰C to +85⁰C operation

• ESD protection on all input and output pads

____________________________ Typical Applications ____________________________

Cell Phones / PDAs / Smart Phones

Portable Audio & Media Players

GPS Personal Navigation Devices

Automotive and Accessories

Rev 0.3a (05/08)

Product Brief (Rev 0.3a)

QN8006/8006L

QN8006 Block Diagram

QN8006 Pinout

CONTACT INFORMATION

Quintic Corporation (USA)

3211 Scott Blvd, Suite 203

Santa Clara, CA 95054

Quintic Microelectronics (China)

Building 8 B-301A Tsinghua Science Park

1st East Zhongguancun Rd, Haidian

Beijing, China 100084

Tel: +1 408 970-8808

Fax: +1 408 970-8829

Tel: +86 (10) 8215-1997

Email: support@quinticcorp.com

Web: www.quinticcorp.com

Fax: +86 (10) 8215-1570

Email: support@quinticcorp.com

Web: www.quinticcorp.com

Revision 0.3a (05/08)

型号:	QN8041AH
是否Rohs认证：	不符合
生命周期：	Obsolete
IHS 制造商：	INTEL CORP
零件包装代码：	LCC
包装说明：	QCCJ, LDCC44,.7SQ
针数：	44
Reach Compliance Code：	unknown
HTS代码：	8542.31.00.01
风险等级：	5.92
具有ADC：	NO
其他特性：	ADDITIONAL SUPPLY VDD = 5V+/-10%
地址总线宽度：
位大小：	8
边界扫描：	NO
CPU系列：	8048
最大时钟频率：	12.5 MHz
DAC 通道：	NO
DMA 通道：	NO
外部数据总线宽度：	8
格式：	FIXED POINT
集成缓存：	NO
JESD-30 代码：	S-PQCC-J44
JESD-609代码：	e0
长度：	16.5862 mm
低功率模式：	YES
DMA 通道数量：
外部中断装置数量：
I/O 线路数量：	16
串行 I/O 数：
端子数量：	44
计时器数量：	1
片上数据RAM宽度：	8
片上程序ROM宽度：	8
最高工作温度：	70 °C
最低工作温度：
PWM 通道：	NO
封装主体材料：	PLASTIC/EPOXY
封装代码：	QCCJ
封装等效代码：	LDCC44,.7SQ
封装形状：	SQUARE
封装形式：	CHIP CARRIER
峰值回流温度（摄氏度）：	NOT SPECIFIED
电源：	5 V
认证状态：	Not Qualified
RAM（字节）：	128
RAM（字数）：	128
ROM（单词）：	1000
ROM可编程性：	MROM
座面最大高度：	4.57 mm
速度：	0.833 MHz
子类别：	Microcontrollers
最大压摆率：	115 mA
最大供电电压：	5.5 V
最小供电电压：	4.5 V
标称供电电压：	5 V
表面贴装：	YES
技术：	NMOS
温度等级：	COMMERCIAL
端子面层：	Tin/Lead (Sn/Pb)
端子形式：	J BEND
端子节距：	1.27 mm
端子位置：	QUAD
处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	16.5862 mm
uPs/uCs/外围集成电路类型：	MICROCONTROLLER
Base Number Matches：	1

电子百科

产品导航

产品型号QN8006的Datasheet PDF文件预览

QN8005相关产品..

QN8005相关文章

IC37:专业IC行业平台