SMCJ54CA-E3/57T中文资料应用文章市场行情现货热卖使用介绍-中国IC网-芯三七

产品型号SMCJ54CA-E3/57T的Datasheet PDF文件预览

SMCJ5.0A thru SMCJ188CA

www.vishay.com

Vishay General Semiconductor

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES

Available

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in unidirectional and bidirectional

• Excellent clamping capability

• Very fast response time

SMC (DO-214AB)

Available

• Low incremental surge resistance

Cathode

Anode

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

(unidirectional)

(bidirectional)

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHE3 or P/NHM3

LINKS TO ADDITIONAL RESOURCES

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

3D Models

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive, and telecommunication.

PRIMARY CHARACTERISTICS

V_BRunidirectional

6.40 V to 231 V

_BRbidirectional

6.40 V to 231 V

5.0 V to 188 V

1500 W

V_WM

P_PPM

P_D

MECHANICAL DATA

Case: SMC (DO-214AB)

6.5 W

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/N-M3 - halogen-free, RoHS-compliant, commercial

grade

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

Base P/NHM3_X - halogen-free, RoHS-compliant, and

AEC-Q101 qualified

I_FSM(unidirectional only)

200 A

T_Jmax.

150 °C

Polarity

Unidirectional, bidirectional

SMC (DO-214AB)

Package

DEVICES FOR BIDIRECTION APPLICATIONS

(“_X” denotes revision code e.g. A, B, ...)

For bidirectional devices use CA suffix (e.g. SMCJ188CA).

Electrical characteristics apply in both directions.

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3, M3, HE3, and HM3 suffix meets JESD 201 class 2

whisker test

Polarity: for unidirectional types the band denotes cathode

end, no marking on bidirectional types

MAXIMUM RATINGS (T_A= 25 °C unless otherwise noted)

PARAMETER

SYMBOL

P_PPM

VALUE

1500

UNIT

Peak pulse power dissipation with a 10/1000 μs waveform ⁽¹⁾⁽²⁾

Peak pulse current with a 10/1000 μs waveform ⁽¹⁾

Power dissipation on infinite heatsink, T_A= 50 °C

Peak forward surge current 8.3 ms single half sine-wave unidirectional only

Operating junction and storage temperature range

I_PPM

See next table

6.5

P_D

(2)

I_FSM

200

T_J, T_STG

-55 to +150

°C

Notes

(1)

Non-repetitive current pulse, per fig. 3 and derated above T_A= 25 °C per fig. 2

Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal

(2)

Revision: 30-Jun-2021

Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMCJ5.0A thru SMCJ188CA

www.vishay.com

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (T_A= 25 °C unless otherwise noted)

BREAKDOWN

MAXIMUM

DEVICE

MARKING

CODE

DEVICE TYPE

MODIFIED

“J” BEND

LEAD

TEST

STAND-OFF

VOLTAGE

REVERSE PEAK PULSE CLAMPING TEMPERATURE

CURRENT VOLTAGE

(1)

_BRAT I_T

LEAKAGE

AT V_WM

SURGE

VOLTAGE

AT I_PPM

V_C(V)

COEFFICIENT

OF V_BR

I_T

(mA)

V_WM

(V)

CURRENT

I_D(μA) ⁽³⁾

_PPM(A) ⁽²⁾

(%/°C)

UNI

MIN.

6.40

6.67

7.22

7.78

8.33

8.89

9.44

10.0

11.1

12.2

13.3

14.4

15.6

16.7

17.8

18.9

20.0

22.2

24.4

26.7

28.9

31.1

33.3

36.7

40.0

44.4

47.8

50.0

53.3

56.7

60.0

64.4

66.7

71.1

77.8

83.3

86.7

94.4

100

MAX.

7.07

7.37

7.98

8.60

9.21

9.83

10.4

11.1

12.3

13.5

14.7

15.9

17.2

18.5

19.7

20.9

22.1

24.5

26.9

29.5

31.9

34.4

36.8

40.6

44.2

49.1

52.8

55.3

58.9

62.7

66.3

71.2

73.7

78.6

86.0

92.1

95.8

104

⁽⁺⁾SMCJ5.0A ⁽⁵⁾GDE GDE

5.0

6.0

6.5

7.0

7.5

8.0

8.5

9.0

1000

500

200

100

163.0

145.6

133.9

125.0

116.3

110.3

104.2

97.4

88.2

82.4

75.4

69.8

64.7

61.5

57.7

54.3

51.4

46.3

42.3

38.6

35.6

33.0

31.0

28.1

25.8

23.3

21.6

20.6

19.4

18.2

17.2

16.0

15.5

14.6

13.3

12.4

11.9

10.9

10.3

9.3

9.2

0.057

0.059

0.061

0.065

0.067

0.069

0.073

0.074

0.078

0.080

0.083

0.084

0.087

0.088

0.089

0.090

0.092

0.094

0.096

0.097

0.098

0.099

0.100

0.101

0.102

0.103

0.104

0.105

0.106

0.107

0.108

⁽⁺⁾SMCJ6.0A

⁽⁺⁾SMCJ6.5A

⁽⁺⁾SMCJ7.0A

⁽⁺⁾SMCJ7.5A

⁽⁺⁾SMCJ8.0A

⁽⁺⁾SMCJ8.5A

⁽⁺⁾SMCJ9.0A

⁽⁺⁾SMCJ10A

⁽⁺⁾SMCJ11A

⁽⁺⁾SMCJ12A

⁽⁺⁾SMCJ13A

⁽⁺⁾SMCJ14A

⁽⁺⁾SMCJ15A

⁽⁺⁾SMCJ16A

⁽⁺⁾SMCJ17A

⁽⁺⁾SMCJ18A

⁽⁺⁾SMCJ20A

⁽⁺⁾SMCJ22A

⁽⁺⁾SMCJ24A

⁽⁺⁾SMCJ26A

⁽⁺⁾SMCJ28A

⁽⁺⁾SMCJ30A

⁽⁺⁾SMCJ33A

⁽⁺⁾SMCJ36A

⁽⁺⁾SMCJ40A

⁽⁺⁾SMCJ43A

⁽⁺⁾SMCJ45A

⁽⁺⁾SMCJ48A

⁽⁺⁾SMCJ51A

⁽⁺⁾SMCJ54A

⁽⁺⁾SMCJ58A

⁽⁺⁾SMCJ60A

⁽⁺⁾SMCJ64A

⁽⁺⁾SMCJ70A

⁽⁺⁾SMCJ75A

⁽⁺⁾SMCJ78A

⁽⁺⁾SMCJ85A

⁽⁺⁾SMCJ90A

⁽⁺⁾SMCJ100A

⁽⁺⁾SMCJ110A

⁽⁺⁾SMCJ120A

⁽⁺⁾SMCJ130A

⁽⁺⁾SMCJ150A

⁽⁺⁾SMCJ160A

⁽⁺⁾SMCJ170A

SMCJ188A

GDG GDG

GDK BDK

GDM GDM

GDP BDP

GDR BDR

GDT BDT

GDV BDV

GDX BDX

GDZ GDZ

10.3

11.2

12.0

12.9

13.6

14.4

15.4

17.0

18.2

19.9

21.5

23.2

24.4

26.0

27.6

29.2

32.4

35.5

38.9

42.1

45.4

48.4

53.3

58.1

64.5

69.4

72.7

77.4

82.4

87.1

93.6

96.8

103

1.0

5.0

1.0

GEE

BEE

GEG GEG

GEK BEK

GEM BEM

GEP GEP

GER GER

GET

GEV

GEX

GEZ

GFE

BET

BEV

BEX

BEZ

BFE

GFG BFG

GFK BFK

GFM BFM

GFP

GFR

GFT

GFV

GFX

GFZ

BFP

BFR

BFT

GFV

GFX

GFZ

GGE GGE

GGG GGG

GGK GGK

GGM GGM

GGP GGP

GGR GGR

GGT GGT

GGV GGV

GGX GGX

GGZ GGZ

GHE GHE

GHG GHG

GHK GHK

GHM GHM

GHP GHP

GHR GHR

GHS GHS

113

121

126

137

146

162

177

193

209

243

259

275

111

123

100

110

120

130

150

160

170

188

122

135

8.5

7.8

7.2

6.2

5.8

5.5

4.6

133

147

144

159

167

185

178

197

189

209

231

328

Notes

(1)

(2)

(3)

(4)

(5)

(6)

(+)

Pulse test: t_p≤ 50 ms

Surge current waveform per fig. 3 and derate per fig. 2

For bidirectional types having V_WMof 10 V and less, the I_Dlimit is doubled

All terms and symbols are consistent with ANSI/IEEE C62.35

For the bidirectional SMCJ5.0CA, the maximum V_BRis 7.25 V

V_F= 3.5 V at I_F= 100 A (unidirectional only)

Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number

E136766 for both uni-directional and bi-directional devices

Revision: 30-Jun-2021

Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMCJ5.0A thru SMCJ188CA

www.vishay.com

Vishay General Semiconductor

THERMAL CHARACTERISTICS (T_A= 25 °C unless otherwise noted)

PARAMETER

Typical thermal resistance, junction to ambient air ⁽¹⁾

SYMBOL

VALUE

UNIT

R_θJA

°C/ W

Typical thermal resistance, junction to lead

R_θJL

Note

(1)

Mounted on minimum recommended pad layout

ORDERING INFORMATION (Example)

PREFERRED P/N

UNIT WEIGHT (g) PREFERRED PACKAGE CODE

BASE QUANTITY

DELIVERY MODE

SMCJ5.0A-E3/57T

SMCJ5.0A-M3/57T

SMCJ5.0A-E3/9AT

SMCJ5.0A-M3/9AT

SMCJ5.0AHE3_A/H ⁽¹⁾

SMCJ5.0AHM3_A/H ⁽¹⁾

SMCJ5.0AHE3_A/I ⁽¹⁾

SMCJ5.0AHM3_A/I ⁽¹⁾

0.211

57T

9AT

850

3500

850

7" diameter plastic tape and reel

13" diameter plastic tape and reel

7" diameter plastic tape and reel

13" diameter plastic tape and reel

3500

Note

(1)

AEC-Q101 qualified

Revision: 30-Jun-2021

Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMCJ5.0A thru SMCJ188CA

www.vishay.com

Vishay General Semiconductor

RATINGS AND CHARACTERISTICS CURVES (T_A= 25 °C unless otherwise noted)

100

20 000

10 000

Measured at

zero bias

1000

100

V_R, measured at

Stand-off voltage V_WM

Uni-directional

Bi-directional

T_J= 25 °C

f = 1.0 MHz

0.31 x 0.31" (8.0 x 8.0 mm)

Copper pad areas

_sig= 50 mVp-p

0.1

0.1 µs

1.0 µs

10 µs

100 µs

1.0 ms

10 ms

100

400

t_d- Pulse Width (s)

V_WM- Reverse Stand-Off Voltage (V)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 4 - Typical Junction Capacitance Unidirectional

100

1.0

0.1

0.001

0.01

0.1

100

1000

100 125

150 175

200

t_p- Pulse Duration (s)

T_J- Initial Temperature (°C)

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 5 - Typical Transient Thermal Impedance

150

200

100

T_J= 25 °C

Pulse width (t_d)

is defined as the point

where the peak current

decays to 50 % of I_PPM

t_r= 10 µs

Peak value

I_PPM

100

Half value -

I_PPM

I_PP

10/1000 µs waveform

as defined by R.E.A.

T_J= T_Jmax.

8.3 ms single half sine-wave

t_d

1.0

3.0

4.0

100

2.0

t - Time (ms)

Number of Cycles at 60 Hz

Fig. 3 - Pulse Waveform

Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current

Unidirectional Use On

Revision: 30-Jun-2021

Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SMCJ5.0A thru SMCJ188CA

www.vishay.com

Vishay General Semiconductor

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

SMC (DO-214AB)

Mounting Pad Layout

Cathode Band

0.185 (4.69)

MAX.

0.126 (3.20)

0.114 (2.90)

0.246 (6.22)

0.220 (5.59)

0.126 (3.20)

MIN.

0.280 (7.11)

0.260 (6.60)

0.060 (1.52)

MIN.

0.012 (0.305)

0.006 (0.152)

0.320 REF.

0.103 (2.62)

0.079 (2.06)

0.060 (1.52)

0.030 (0.76)

0.008 (0.2)

0 (0)

0.320 (8.13)

0.305 (7.75)

Revision: 30-Jun-2021

Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

型号:	SMCJ54CA-E3/57T
是否无铅：	不含铅
是否Rohs认证：	符合
生命周期：	Active
零件包装代码：	DO-214AB
包装说明：	R-PDSO-C2
针数：	2
Reach Compliance Code：	unknown
ECCN代码：	EAR99
HTS代码：	8541.10.00.50
风险等级：	0.77
其他特性：	UL RECOGNIZED; EXCELLENT CLAMPING CAPABILITY
最大击穿电压：	66.3 V
最小击穿电压：	60 V
击穿电压标称值：	63.15 V
最大钳位电压：	87.1 V
配置：	SINGLE
二极管元件材料：	SILICON
二极管类型：	TRANS VOLTAGE SUPPRESSOR DIODE
JEDEC-95代码：	DO-214AB
JESD-30 代码：	R-PDSO-C2
JESD-609代码：	e3
湿度敏感等级：	1
最大非重复峰值反向功率耗散：	1500 W
元件数量：	1
端子数量：	2
最高工作温度：	150 °C
最低工作温度：	-55 °C
封装主体材料：	PLASTIC/EPOXY
封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	260
极性：	BIDIRECTIONAL
最大功率耗散：	6.5 W
认证状态：	Not Qualified
最大重复峰值反向电压：	54 V
子类别：	Transient Suppressors
表面贴装：	YES
技术：	AVALANCHE
端子面层：	Matte Tin (Sn)
端子形式：	C BEND
端子位置：	DUAL
处于峰值回流温度下的最长时间：	40
Base Number Matches：	1

电子百科

产品导航

产品型号SMCJ54CA-E3/57T的概述

产品型号SMCJ54CA-E3/57T的Datasheet PDF文件预览

SMCJ54CA-E3/57T相关产品..

SMCJ54CA-E3/57T相关文章

IC37:专业IC行业平台