STEVAL-BCN002V1B全新原装原理图各脚功能电路原理芯片引脚定义-中国IC网-芯三七

产品型号STEVAL-CBP006V1的Datasheet PDF文件预览

STEVAL-CBP006V1

UniPower front panel and standby power management

controller for STB, TV sets and other consumer devices

Data brief

Features

■ Includes the STM8S105xx MCU with 32

Kbytes of Flash memory packaged in an

LQFP48

■ Alternative footprint for MCU in VFQFN32

package (within LQFP48 footprint)

■ PMOS controlled switch up to 5 A

■ 6 mechanical switches, 4 touch-sensing

buttons, 1 slider

■ 4-digit, 7-segment display and 6 controllable

STEVAL-CBP006V1

LEDs

■ Photo-resistor for automatic display dimming

The UniPower demonstration board is

preprogrammed with demonstration firmware to

manage most of the system’s hardware

resources, such as digital and analog I/Os, LEDs

and mechanical buttons. Touch-sensing functions

can thus be easily combined with traditional MCU

capabilities by selecting appropriate modules

from the UniPower MCU firmware library. The

UniPower demonstration board allows designers

who are familiar with the use of standard

■ 36 kHz-carrier infrared receiver for board

remote control

■ All MCU I/Os available on a header connector

for implementation of additional functions

■ SWIM interface for firmware programming and

debugging

■ Dedicated connector for interfacing with host,

with signals including I C, interrupt and reset

outputs, and wakeup

microcontrollers to perform extensive application

standby power management and create higher-

end look-and-feel human interfaces by replacing

conventional electromechanical switches with

capacitive touchkeys. The application cost can be

reduced by choosing a smaller MCU from the

STM8S portfolio. The board is delivered with a

SWIM interface, allowing adaptation of the

firmware to application requirements. This

simplifies the concept of the UniPower MCU

firmware library, and makes the evaluation of the

key features for end-applications easy. Maturity,

robustness, flexibility and performance make this

solution simple to implement and quick to market.

It can be integrated into various types of

■ RoHS compliant

Description

The STEVAL-CBP006V1 UniPower

demonstration board is designed to provide a

ready-to-use platform for power supply

management and user-interface control

developed around the STM8S MCU. The board

can manage various wakeup sources, and

perform power supply switching of the rest of the

application during standby. The board also

features an ST capacitive touch-sensing software

library capable of turning any 8-bit STM8

microcontroller into a capacitive touch-sensing

controller.

consumer application, such as set-top boxes,

digital TVs and home appliances. For further

details about the touch-sensing software library,

please refer to the STM8 touch-sensing firmware

documentation.

June 2010

Doc ID 17642 Rev 1

1/4

For further information contact your local STMicroelectronics sales office.

www.st.com

Schematic diagrams

STEVAL-CBP006V1

Schematic diagrams

Figure 1.

Circuit schematics

P A 2 C V

P A 1 C V

T S R N

8 4 3 3 O S P T

s V

D N G

T U O

2 0 0 7 2 N

P D

P A

P D

P A

1 M

M 3 . 3

A 0 . 5

M S A J

R E I D L S _ H C U O T

AM07256v1

2/4

Doc ID 17642 Rev 1

STEVAL-CBP006V1

Revision history

Table 1.

Date

16-Jun-2010

Document revision history

Revision

Changes

Initial release.

Doc ID 17642 Rev 1

3/4

STEVAL-CBP006V1

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any

time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such

third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE

GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any

liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

www.st.com

4/4

Doc ID 17642 Rev 1

型号:	STF-1542C-115VAC
生命周期：	Obsolete
IHS 制造商：	ALLIED CONTROLS INC
Reach Compliance Code：	unknown
ECCN代码：	EAR99
风险等级：	5.6
其他特性：	COIL OPERATIVE VOLTAGE(AC): 86 V
线圈电阻：	6000 Ω
最大线圈电压（交流）：	115 V
最大触点电流（交流）：	5 A
最大触点电流（直流）：	5 A
触点/输出电源类型：	AC/DC
制造商序列号：	ST
安装特点：	PANEL MOUNT
继电器动作：	MOMENTARY
继电器功能：	DPDT
继电器类型：	POWER/SIGNAL RELAY
密封：	IMMERSION SEALED
表面贴装：	NO
端接类型：	SOLDER
Base Number Matches：	1

电子百科

产品导航

产品型号STEVAL-CBP006V1的Datasheet PDF文件预览

STEVAL-BCN002V1B相关产品..

STEVAL-BCN002V1B相关文章

IC37:专业IC行业平台