T496D336K020ATE400全新原装原理图各脚功能电路原理芯片引脚定义-中国IC网-芯三七

Fused MnO₂Tantalum Surface Mount Capacitors

T496 Series Fail-Safe Fused Space Grade

Overview

KEMET's Space Grade Series of capacitors are suitable for

use by military/aerospace customers in high reliability space

applications. This series meets the requirements of MIL–

PRF–55365 as well as MIL–STD–1580. These capacitors

incorporate an intensive testing and screening protocol which

isꢀcustomizableꢀdependingꢀonꢀspeciﬁcꢀcustomerꢀrequirements.ꢀ

The full part number allows for designation of Weibull grading

level (C=0.01%/k hours), surge current level (10 cycles -55°C and

+85°Cꢀbeforeꢀand/orꢀafterꢀWeibullꢀgrading),ꢀperformanceꢀtestingꢀ

level (see chart for details on available options), ESR (low and

standard),ꢀandꢀterminationꢀﬁnishꢀ(seeꢀdescriptionꢀinꢀeachꢀseries).ꢀ

Fused versions are available for built-in circuit protection, as well

as multi-anode designs for very low ESR values.

Beneﬁts

• Internal fuse protects against damaging short circuit failure mode • RoHS Compliant and lead-free terminations

• Standard case sizes B, C, D, X per EIA 535BAAC

• 100% surge current test available

• Optional gold-plated terminations

• Weibull Grading C (0.01%/1,000 hours)

•ꢀ Capacitanceꢀvaluesꢀofꢀ0.15ꢀμFꢀtoꢀ470ꢀμF

• Voltage rating of 4 – 50 VDC

•ꢀ Operatingꢀtemperatureꢀrangeꢀofꢀ-55˚Cꢀtoꢀ+125˚C

•ꢀ Fuseꢀactivation,ꢀ25˚C:ꢀwithinꢀ1ꢀsecondꢀatꢀfaultꢀcurrentsꢀofꢀ

4 amps and higher

•ꢀ Continuousꢀcurrentꢀcapability:ꢀ0.75ꢀamps

•ꢀ Postꢀactuationꢀresistance,ꢀ25˚C:ꢀ10ꢀMΩ,ꢀminimum

• Test tabs on side of case bypass the capacitor element to

allow direct testing of the fuse assembly

Environmental Compliance

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

SPICE

Forꢀaꢀdetailedꢀanalysisꢀofꢀspeciﬁcꢀpartꢀnumbers,ꢀpleaseꢀvisitꢀwww.kemet.comꢀforꢀaꢀfreeꢀdownloadꢀofꢀKEMET'sꢀSPICEꢀsoftware.ꢀ

The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over

frequency, temperature, ripple, and DC bias conditions.

One world. One KEMET

T2026_T496_SPACE • 7/19/2013

1

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Ordering Information

T

496

X

227

M

010

C

61

2

A

Capacitor

Class

Capacitance Capacitance

Code (pF) Tolerance

Failure Rate/

Design

Series Case Size

Voltage

Lead Material

Surge

ESR

Testing

T =

Fail

B, C, D, X First two digits K = ±10% 004 = 4 V

C =

T = 100% Matte 61 = None

1 = ESR - A = Option A

Tantalum Safe -

Space

represent

signiﬁcantꢀ

ﬁgures.ꢀThirdꢀ

digitꢀspeciﬁesꢀ

number of

zeros.

M = ±20% 006 = 6.3 V 0.01%/1,000 Tin (Sn) Plated 62 = 10 Cycles Standard B = Option B

010 = 10 V

016 = 16 V

020 = 20 V

025 = 25 V

035 = 35 V

050 = 50 V

hours

H = Standard

Solder Coated

(SnPb 5% Pb

minimum)

25°C

2 = ESR - C = Option C

Grade

63 = 10 Cycles, Low

-55°C and 85°C

before Weibull

64 = 10 Cycles,

-55°C and 85°C

after Weibull

65 = Both

Applications

Typicalꢀapplicationsꢀincludeꢀdecouplingꢀandꢀﬁlteringꢀinꢀcomputingꢀandꢀtelecommunicationsꢀendꢀapplications,ꢀsuchꢀasꢀhigh-endꢀserversꢀ

requiring built-in fuse capability.

Performance Characteristics

Item

Performance Characteristics

Operating Temperature

-55°C to 125°C

Rated Capacitance Range

Capacitance Tolerance

Rated Voltage Range

DF (120 Hz)

0.15 – 477 µF @ 120 Hz/25°C

K Tolerance (10%), M Tolerance (20%)

4 – 50 V

ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpeciﬁcationꢀTableꢀ

≤ꢀ0.01ꢀCVꢀ(µA)ꢀatꢀratedꢀvoltageꢀafterꢀ5ꢀminutes

ESR (100 kHz)

Leakage Current

T2026_T496_SPACE • 7/19/2013

2

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Qualiﬁcation

Test

Condition

Characteristics

Within ±10% of initial value

Within initial limits

ΔꢀC/C

DF

85°C @ rated voltage, 2,000 hours

125°C @ 2/3 rated voltage, 2,000 hours

Endurance

DCL

ESR

ΔꢀC/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±10% of initial value

Within initial limits

Storage Life

125°C @ 0 Volts, 2,000 hours

DCL

ESR

ΔꢀC/C

DF

Within 1.25 x initial limit

Within initial limits

Within ±5% of initial value

Within initial limits

MIL–STD–202, Method 107, Condition B, mounted, -55C° to

125°C, 1,000 cycles

Thermal Shock

DCL

ESR

+25°C

IL*

Within 1.25 x initial limit

Within initial limits

-55°C

±10%

IL

+85°C

±10%

+125°C

±20%

Extreme temperature exposure at a

successionꢀofꢀcontinuousꢀstepsꢀatꢀ+25ºC,ꢀ

-55ºC,ꢀ+25ºC,ꢀ+85ºC,ꢀ+125ºC,ꢀ+25ºC

ΔꢀC/C

Temperature Stability

DF

IL

1.5 x IL

10 x IL

1.5 x IL

12 x IL

DCL

IL

n/a

ΔꢀC/C

DF

Within ±5% of initial value

Within initial limits

25°C and 85°C, 1.32 x rated voltage 1,000 cycles.

(125°C, 1.2 x rated voltage)

Surge Voltage

DCL

ESR

ΔꢀC/C

DF

Within initial limits

Within ±10% of initial value

Within initial limits

MIL–STD–202, Method 213, Condition I, 100 G peak.

MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,

20 G peak

Mechanical Shock/Vibration

DCL

Within initial limits

*IL = Initial Limit

Certiﬁcation

DSCC Drawing 04053

T2026_T496_SPACE • 7/19/2013

3

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Electrical Characteristics

Capacitance vs. Frequency

ESR vs. Frequency

1,000

1000

100

10

T496B106M016ATE3K5

T496B106M016ATE3K5_IMP

T496D476M016ATE400_IMP

T496X107M016ATE700_IMP

T496B106M016ATE3K5_ESR

T496D476M016ATE400_ESR

T496X107M016ATE700_ESR

T496D476M016ATE400

T496X107M016ATE700

100

10

1

0

0.1

100

1,000

10,000

Frequency (Hz)

100,000

1,000,000

10,000,000

100

1,000

10,000

100,000

1,000,000

10,000,000

Frequency (Hz)

Dimensions – Millimeters (Inches)

Metric will govern

Termination

cutout at

KEMET’s

option,

either end

Case Size

Component

F* ±0.1 S* ±0.3 B* ±0.15

±(.004) ±(.012) (Ref) ±.006

KEMET EIA

L*

W*

H*

X (Ref)

P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)

3.5 ±0.2

2.8 ±0.2

1.9 ±0.2

0.10 ±0.10

(0.004 ±0.004)

3528–21

2.2 (.087) 0.8 (.031)

2.2 (.087) 1.3 (.051)

2.4 (.094) 1.3 (.051)

0.4 (.016)

0.5 (.020)

0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.1 (.043) 1.8 (0.071) 2.2 (0.087)

0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 2.5(.098) 2.8 (0.110) 2.4 (0.094)

0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)

1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138)

B

(0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008)

6.0 ±0.3 3.2 ±0.3 2.5 ±0.3

(0.236 ±0.03) (0.126 ±0.012) (0.098 ±0.012)

7.3 ± 0.3 4.3 ± 0.3 2.8 ± 0.3

(0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012)

7.3 ±0.3 4.3 ±0.3 4.0 ±0.3

(0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012)

0.10 ±0.10

(0.004 ±0.004)

6032–28

C

0.10 ±0.10

(0.004 ±0.004)

7343–31

D

0.10 ±0.10

(0.004 ±0.004)

7343–43

X

Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low proﬁle cases do not have a bevel or a notch.

* MIL–C–55365/8 speciﬁed dimensions

T2026_T496_SPACE • 7/19/2013

4

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Table 1 – Ratings & Part Number Reference

Rated

Case Code/

DC

Leakage

µA @ +20ºC

Standard

ESR

Moisture

Sensitivity

Temperature

≤ 260ºC

KEMET Part Number

DF

Low ESR

Voltage Capacitance Case Size

% @ +20ºC

Ω @ +20ºC

(See below for

part options)

V

µF

KEMET/EIA

Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum

4

68

C/6032-28

D/7343-31

X/7343-43

T496C686(1)004(2)(3)(4)(5)(6)

T496C107(1)004(2)(3)(4)(5)(6)

T496C157(1)004(2)(3)(4)(5)(6)

T496D157(1)004(2)(3)(4)(5)(6)

T496D227(1)004(2)(3)(4)(5)(6)

T496D337(1)004(2)(3)(4)(5)(6)

T496X337(1)004(2)(3)(4)(5)(6)

T496X477(1)004(2)(3)(4)(5)(6)

2.7

4

6

8

1.6

1.2

0.8

0.7

0.5

0.4

N/A

0.4

N/A

1

100

150

220

330

470

6

8.8

13.2

18.8

6.3

4.7

6.8

10

22

15

22

33

47

B/3528-21

C/6032-28

D/7343-31

C/6032-28

D/7343-31

C/6032-28

D/7343-31

X/7343-43

D/7343-31

X/7343-43

D/7343-31

X/7343-43

T496B475(1)006(2)(3)(4)(5)(6)

T496B685(1)006(2)(3)(4)(5)(6)

T496B106(1)006(2)(3)(4)(5)(6)

T496B226(1)006(2)(3)(4)(5)(6)

T496C156(1)006(2)(3)(4)(5)(6)

T496C226(1)006(2)(3)(4)(5)(6)

T496C336(1)006(2)(3)(4)(5)(6)

T496C476(1)006(2)(3)(4)(5)(6)

T496D476(1)006(2)(3)(4)(5)(6)

T496C686(1)006(2)(3)(4)(5)(6)

T496D686(1)006(2)(3)(4)(5)(6)

T496C107(1)006(2)(3)(4)(5)(6)

T496D107(1)006(2)(3)(4)(5)(6)

T496X107(1)006(2)(3)(4)(5)(6)

T496D157(1)006(2)(3)(4)(5)(6)

T496X157(1)006(2)(3)(4)(5)(6)

T496X227(1)006(2)(3)(4)(5)(6)

T496D227(1)006(2)(3)(4)(5)(6)

T496X337(1)006(2)(3)(4)(5)(6)

0.5

0.6

1.3

0.9

1.4

2

2.9

4.1

6

9

13.2

19.8

6

8

3.5

2

1.6

1

1.2

1

0.4

0.8

0.9

0.7

0.3

0.7

0.5

N/A

1.5

N/A

0.6

1

0.6

N/A

0.4

0.3

N/A

0.3

68

100

150

220

330

10

3.3

4.7

6.8

10

15

22

33

47

68

100

150

220

B/3528-21

C/6032-28

B/3528-21

C/6032-28

D/7343-31

C/6032-28

D/7343-31

X/7343-43

D/7343-31

X/7343-43

D/7343-31

X/7343-43

T496B335(1)010(2)(3)(4)(5)(6)

T496B475(1)010(2)(3)(4)(5)(6)

T496B685(1)010(2)(3)(4)(5)(6)

T496C106(1)010(2)(3)(4)(5)(6)

T496B156(1)010(2)(3)(4)(5)(6)

T496C156(1)010(2)(3)(4)(5)(6)

T496C226(1)010(2)(3)(4)(5)(6)

T496C336(1)010(2)(3)(4)(5)(6)

T496D336(1)010(2)(3)(4)(5)(6)

T496C476(1)010(2)(3)(4)(5)(6)

T496D476(1)010(2)(3)(4)(5)(6)

T496D686(1)010(2)(3)(4)(5)(6)

T496X686(1)010(2)(3)(4)(5)(6)

T496D107(1)010(2)(3)(4)(5)(6)

T496X107(1)010(2)(3)(4)(5)(6)

T496D157(1)010(2)(3)(4)(5)(6)

T496X157(1)010(2)(3)(4)(5)(6)

T496X227(1)010(2)(3)(4)(5)(6)

0.5

0.7

1

6

8

3.5

2

3.5

2

1.6

1

N/A

0.6

0.5

0.4

N/A

0.4

N/A

0.4

0.3

1

1.5

2.2

3.3

4.7

6.8

10

1.2

1

0.8

0.9

0.7

0.4

0.7

0.5

10

15

22

16

B/3528-21

T496B225(1)016(2)(3)(4)(5)(6)

6

3.5

1

T

49²6^.2

µF

Series Case Size

Rated

X

227

M

010

C ^0.5

T

61 ^3.5

2

A

µA @ +20ºC

% @ +20ºC

Ω @ +20ºC

Temperature

≤ 260ºC

(See below for

part options)

V

KEMET/EIA

Capacitor

Class

Capacitance Capacitance

Failure Rate/

Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum

Voltage

Lead Material

Surge

ESR

Testing

Code (pF)

Tolerance

Design

Rated

Case Code/

DC

Moisture

Sensitivity

1 = ESR - A = Option A

KEMET Part Number

DF

Standard ESR

Low ESR

Voltage

Capacitance

Case Size

Leakage

C =

T =

Fail

B, C, D, X First two digits K = ±10% 004 = 4 V

T = 100% Matte 61 = None

Tantalum Safe -

represent

M = ±20% 006 = 6.3 V 0.01%/1,000 Tin (Sn) Plated 62 = 10 Cycles Standard B = Option B

25°C 2 = ESR - C = Option C

63 = 10 Cycles, Low

(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.

Space signi ꢀcantꢀ 010 = 10 V hours H = Standard

(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.

Grade ꢀgures.ꢀThirdꢀ 016 = 16 V Solder Coated

(3) To complete KEMET part number, insert H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.

digitꢀspeci ꢀesꢀ 020 = 20 V (SnPb 5% Pb -55°C and 85°C

(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before

number of

zeros.

025 = 25 V

035 = 35 V

minimum)

before Weibull

64 = 10 Cycles,

-55°C and 85°C

Weibull or 65 = Both. Designates Surge current option.

(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.

050 = 50 V

(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more

after Weibull

65 = Both

information.

Refer to Ordering Information for additional detail.

T2026_T496_SPACE • 7/19/2013

5

Roll Over for

Order Info.

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Table 1 – Ratings & Part Number Reference cont'd

Rated

Case Code/

DC

Leakage

µA @ +20ºC

Standard

ESR

Moisture

Sensitivity

Temperature

≤ 260ºC

KEMET Part Number

DF

Low ESR

Voltage Capacitance Case Size

% @ +20ºC

Ω @ +20ºC

(See below for

part options)

V

µF

KEMET/EIA

Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum

16

3.3

4.7

6.8

10

15

22

33

47

68

B/3528-21

C/6032-28

D/7343-31

X/7343-43

D/7343-31

T496B335(1)016(2)(3)(4)(5)(6)

T496B475(1)016(2)(3)(4)(5)(6)

T496C685(1)016(2)(3)(4)(5)(6)

T496C106(1)016(2)(3)(4)(5)(6)

T496C156(1)016(2)(3)(4)(5)(6)

T496C226(1)016(2)(3)(4)(5)(6)

T496D226(1)016(2)(3)(4)(5)(6)

T496D336(1)016(2)(3)(4)(5)(6)

T496D476(1)016(2)(3)(4)(5)(6)

T496X476(1)016(2)(3)(4)(5)(6)

T496D686(1)016(2)(3)(4)(5)(6)

0.5

0.8

1.1

6

8

3.5

2

1.6

1

0.8

0.9

0.4

2.1

1.6

0.6

0.7

0.6

1

0.5

0.4

N/A

1

1.6

2.4

3.6

5.3

7.5

10.9

20

1.5

2.2

4.7

6.8

10

15

22

33

B/3528-21

C/6032-28

D/7343-31

X/7343-43

T496B155(1)020(2)(3)(4)(5)(6)

T496B225(1)020(2)(3)(4)(5)(6)

T496C475(1)020(2)(3)(4)(5)(6)

T496C685(1)020(2)(3)(4)(5)(6)

T496C106(1)020(2)(3)(4)(5)(6)

T496C156(1)020(2)(3)(4)(5)(6)

T496D156(1)020(2)(3)(4)(5)(6)

T496D226(1)020(2)(3)(4)(5)(6)

T496D336(1)020(2)(3)(4)(5)(6)

T496X336(1)020(2)(3)(4)(5)(6)

0.5

1

1.4

2

3

4.4

6.6

6

5

3.5

2

0.5

1

0.4

0.9

N/A

1.6

N/A

0.6

0.8

N/A

0.5

0.4

1

25

0.68

1

B/3528-21

C/6032-28

B/3528-21

C/6032-28

D/7343-31

C/6032-28

D/7343-31

X/7343-43

T496B684(1)025(2)(3)(4)(5)(6)

T496B105(1)025(2)(3)(4)(5)(6)

T496B155(1)025(2)(3)(4)(5)(6)

T496C225(1)025(2)(3)(4)(5)(6)

T496C335(1)025(2)(3)(4)(5)(6)

T496B475(1)025(2)(3)(4)(5)(6)

T496C475(1)025(2)(3)(4)(5)(6)

T496C685(1)025(2)(3)(4)(5)(6)

T496D106(1)025(2)(3)(4)(5)(6)

T496C156(1)025(2)(3)(4)(5)(6)

T496D156(1)025(2)(3)(4)(5)(6)

T496D226(1)025(2)(3)(4)(5)(6)

T496X226(1)025(2)(3)(4)(5)(6)

0.5

0.6

0.9

1.2

1.7

2.5

3.8

5.5

4

6

6.5

5

3.5

2.5

4

2.5

2

1.2

0.75

1

0.8

0.9

N/A

3.5

1.6

N/A

2.1

N/A

1.3

0.6

N/A

0.5

0.4

1

1.5

2.2

3.3

4.7

6.8

10

15

22

35

0.47

0.68

1

1.5

2.2

3.3

4.7

6.8

10

B/3528-21

C/6032-28

D/7343-31

X/7343-43

D/7343-31

T496B474(1)035(2)(3)(4)(5)(6)

T496B684(1)035(2)(3)(4)(5)(6)

T496B105(1)035(2)(3)(4)(5)(6)

T496C155(1)035(2)(3)(4)(5)(6)

T496C225(1)035(2)(3)(4)(5)(6)

T496C335(1)035(2)(3)(4)(5)(6)

T496D475(1)035(2)(3)(4)(5)(6)

T496D685(1)035(2)(3)(4)(5)(6)

T496D106(1)035(2)(3)(4)(5)(6)

T496X106(1)035(2)(3)(4)(5)(6)

T496D156(1)035(2)(3)(4)(5)(6)

T496X156(1)035(2)(3)(4)(5)(6)

0.5

0.8

1.2

1.7

2.4

3.5

5.3

4

6

8

6.5

5

4.5

3.5

2.5

1.5

1.3

0.5

1

2.6

N/A

3.1

2.6

1.6

0.9

0.7

0.75

N/A

0.5

N/A

1

10

15

0.5

5.3

0.9

T

496

X

^X/73432^-42³7

M

010

_µC_{A @ +20ºC}

T

61 ^0.9

2 _{Ω @ +20ºC}A

% @ +20ºC

Ω @ +20ºC

Temperature

≤ 260ºC

(See below for

part options)

V

µF

KEMET/EIA

Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum

Capacitor

Capacitance Capacitance

Failure Rate/

Series Case Size

Voltage

KEMET Part Number

Lead Material

Surge

Standard ESR

ESR

Testing

Rated

Case Code/

DC

Moisture

Sensitivity

Class

Voltage

T =

Code (pF)

Case Size

Tolerance

Design

Leakage

C =

DF

Low ESR

Capacitance

Fail

B, C, D, X First two digits K = ±10% 004 = 4 V

T = 100% Matte 61 = None

1 = ESR - A = Option A

M = ±20% 006 = 6.3 V 0.01%/1,000 Tin (Sn) Plated 62 = 10 Cycles Standard B = Option B

010 = 10 V hours H = Standard 25°C 2 = ESR - C = Option C

(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.

Tantalum Safe - represent

(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.

Space signi ꢀcantꢀ

Grade ꢀgures.ꢀThirdꢀ 016 = 16 V Solder Coated 63 = 10 Cycles, Low

(3) To complete KEMET part number, insert H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.

digitꢀspeci ꢀesꢀ 020 = 20 V (SnPb 5% Pb -55°C and 85°C

(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before

number of

zeros.

025 = 25 V

035 = 35 V

050 = 50 V

minimum)

before Weibull

64 = 10 Cycles,

-55°C and 85°C

after Weibull

65 = Both

Weibull or 65 = Both. Designates Surge current option.

(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.

(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more

information.

Refer to Ordering Information for additional detail.

T2026_T496_SPACE • 7/19/2013

6

Roll Over for

Order Info.

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Table 1 – Ratings & Part Number Reference cont'd

Rated

Case Code/

DC

Leakage

µA @ +20ºC

Standard

ESR

Moisture

Sensitivity

Temperature

≤ 260ºC

KEMET Part Number

DF

Low ESR

Voltage Capacitance Case Size

% @ +20ºC

Ω @ +20ºC

(See below for

part options)

V

µF

KEMET/EIA

Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum

50

0.15

0.22

0.33

0.47

0.68

1

1.5

2.2

3.3

4.7

B/3528-21

C/6032-28

D/7343-31

X/7343-43

T496B154(1)050(2)(3)(4)(5)(6)

T496B224(1)050(2)(3)(4)(5)(6)

T496B334(1)050(2)(3)(4)(5)(6)

T496C474(1)050(2)(3)(4)(5)(6)

T496C684(1)050(2)(3)(4)(5)(6)

T496C105(1)050(2)(3)(4)(5)(6)

T496C155(1)050(2)(3)(4)(5)(6)

T496D225(1)050(2)(3)(4)(5)(6)

T496D335(1)050(2)(3)(4)(5)(6)

T496D475(1)050(2)(3)(4)(5)(6)

T496X475(1)050(2)(3)(4)(5)(6)

0.5

0.8

1.1

4

6

16

14

10

8

7

5.5

5

2.5

N/A

10

2.6

1.9

1.7

2.7

2

0.9

1

1.7

2.4

6

2

0.4

1.5

1

N/A

0.4

4.7

µA @ +20ºC

% @ +20ºC

Ω @ +20ºC

Temperature

≤ 260ºC

(See below for

part options)

V

µF

KEMET/EIA

Maximum/5 Min 120 Hz Maximum 100 kHz Maximum 100 kHz Maximum

Rated

Voltage

Rated

Capacitance

Case Code/

Case Size

DC

Leakage

Moisture

Sensitivity

KEMET Part Number

DF

Standard ESR

Low ESR

(1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates Capacitance tolerance.

(2) To complete KEMET part number, insert C (0.01%/1,000 hours). Designates Reliability Level.

(3) To complete KEMET part number, insert H = Solder Plated or T = 100% Tin (Sn). Designates Termination Finish.

(4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles -55°C +85°C after Weibull, 64 = 10 cycles -55°C +85°C before

Weibull or 65 = Both. Designates Surge current option.

(5) To complete KEMET part number, insert 1 = Standard ESR, 2 = Low ESR. Designates ESR option.

(6) To complete KEMET part number, insert A = Option 1, B = Option 2 or C = Option 3. Designates Test Option. See Space Grade Test Methods chart for more

information.

Refer to Ordering Information for additional detail.

T

496

X

227

M

010

C

T

61

2

A

Capacitor

Class

Capacitance Capacitance

Code (pF) Tolerance

Failure Rate/

Design

Series Case Size

Voltage

Lead Material

Surge

ESR

Testing

T =

Fail

B, C, D, X First two digits K = ±10% 004 = 4 V

C =

T = 100% Matte 61 = None

1 = ESR - A = Option A

Tantalum Safe -

Space

represent

signi ꢀcantꢀ

ꢀgures.ꢀThirdꢀ

digitꢀspeci ꢀesꢀ

number of

zeros.

M = ±20% 006 = 6.3 V 0.01%/1,000 Tin (Sn) Plated 62 = 10 Cycles Standard B = Option B

010 = 10 V

016 = 16 V

020 = 20 V

025 = 25 V

035 = 35 V

050 = 50 V

hours

H = Standard

Solder Coated

(SnPb 5% Pb

minimum)

25°C

2 = ESR - C = Option C

Grade

63 = 10 Cycles, Low

-55°C and 85°C

before Weibull

64 = 10 Cycles,

-55°C and 85°C

after Weibull

65 = Both

T2026_T496_SPACE • 7/19/2013

7

Roll Over for

Order Info.

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Recommended Voltage Derating Guidelines

1.2

1

-55°C to 125°C

% Change in Working DC

50% of V_R

V_R

Voltage with Temperature

Recommended Maximum

Application Voltage

0.8

0.6

0.4

0.2

0

100% of V_R

% Change in Working DC Voltage

with Temperature

67%

33%

Recommended Maximum Application

Voltage (As % of Rated Voltage)

-55

25

85

125

Temperature (ºC)

Ripple Current/Ripple Voltage

Temperature Compensation Multipliers

for Maximum Power Dissipation

Maximum Power

Dissipation (P max)

mWatts @ 25°C

KEMET Series

and Case Code

EIA

Case Code

≤ꢀ25°C

85°C

125°C

1.00

0.90

0.40

w/+20°C Rise

A

3216–18

3528–21

6032–28

7343–31

7343–43

7360–38

2012–12

3216–12

3528–12

6032–15

7343–20

7343–43

7360–38

75

T= Environmental Temperature

B

85

C

110

150

165

200

325

25

Using the P max of the device, the maximum allowable rms ripple

current or voltage may be determined.

D

X

E

I(max) = √P max/R

E(max) = √P max*R

T428P

R

I = rms ripple current (amperes)

E = rms ripple voltage (volts)

P max = maximum power dissipation(watts)

R = ESR at speciﬁed frequency (ohms)

S

T

60

70

U

90

V

125

270

285

T510X

T510E

T2026_T496_SPACE • 7/19/2013

8

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Reverse Voltage

Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The

positiveꢀterminalꢀisꢀidentiﬁedꢀonꢀtheꢀcapacitorꢀbodyꢀbyꢀaꢀstripeꢀplusꢀinꢀsomeꢀcasesꢀaꢀbeveledꢀedge.ꢀAꢀsmallꢀdegreeꢀofꢀtransientꢀreverseꢀ

voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within

these limits.

Temperature

Permissible Transient Reverse Voltage

25°C

85°C

15% of Rated Voltage

5% of Rated Voltage

1% of Rated Voltage

125°C

Table 2 – Land Dimensions/Courtyard

Metric

Size

Code

Density Level A:

Maximum (Most) Land

Protrusion (mm)

Density Level B:

Median (Nominal) Land

Protrusion (mm)

Density Level C:

Minimum (Least) Land

Protrusion (mm)

KEMET

Case

EIA

X

Y

C

V1

V2

X

Y

C

V1

V2

X

Y

C

V1

V2

B

3528–21

2.35

2.15

1.45

6.10

4.00

2.25

1.75

1.35

5.00

3.50

2.15

1.35

1.25

4.10

3.20

C

D

6032–28

7343–31

7343–43

2.35

2.55

2.65

3.75

2.60

2.70

8.90

10.20

4.40

5.50

2.25

2.45

2.25

3.35

2.50

2.60

7.80

9.10

3.90

5.00

2.15

2.35

1.85

2.95

2.40

2.50

6.90

8.20

3.60

4.70

X¹

Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reﬂow solder processes.

Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reﬂow solder processes.

Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualiﬁcation

testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).

¹ Height of these chips may create problems in wave soldering.

² Land pattern geometry is too small for silkscreen outline

.

T2026_T496_SPACE • 7/19/2013

9

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Soldering Process

KEMET’s families of surface mount capacitors are compatible

Proﬁle Feature

SnPb Assembly Pb-Free Assembly

withꢀwaveꢀ(singleꢀorꢀdual),ꢀconvection,ꢀIR,ꢀorꢀvaporꢀphaseꢀreﬂowꢀ

techniques. Preheating of these components is recommended

toꢀavoidꢀextremeꢀthermalꢀstress.ꢀKEMET'sꢀrecommendedꢀproﬁleꢀ

conditionsꢀforꢀconvectionꢀandꢀIRꢀreﬂowꢀreﬂectꢀtheꢀproﬁleꢀconditionsꢀ

of the IPC/J–STD–020D standard for moisture sensitivity testing.

Theꢀdevicesꢀcanꢀsafelyꢀwithstandꢀaꢀmaximumꢀofꢀthreeꢀreﬂowꢀ

passes at these conditions.

Preheat/Soak

Temperature Minimum (T_Smin

)

100°C

150°C

200°C

Temperature Maximum (T_Smax

)

Time (t_s) from T_sminto T_smax

)

60 – 120 seconds

3°C/seconds maximum

183°C

60 – 120 seconds

3°C/seconds maximum

217°C

Ramp-up Rate (T_Lto T_P)

Liquidous Temperature (T_L)

Time Above Liquidous (t_L)

60 – 150 seconds

220°C*

235°C**

250°C*

260°C**

Peak Temperature (T_P)

Please note that although the X/7343–43 case size can withstand

waveꢀsoldering,ꢀtheꢀtallꢀproﬁleꢀ(4.3ꢀmmꢀmaximum)ꢀdictatesꢀcareꢀinꢀ

wave process development.

Time within 5°C of Maximum

Peak Temperature (t_P)

20 seconds maximum

6°C/seconds maximum

6 minutes maximum

30 seconds maximum

6°C/seconds maximum

8 minutes maximum

Ramp-down Rate (T_Pto T_L)

Time 25°C to Peak Temperature

Handꢀsolderingꢀshouldꢀbeꢀperformedꢀwithꢀcareꢀdueꢀtoꢀtheꢀdifﬁcultyꢀ

in process control. If performed, care should be taken to avoid

contact of the soldering iron to the molded case. The iron should

be used to heat the solder pad, applying solder between the pad

andꢀtheꢀtermination,ꢀuntilꢀreﬂowꢀoccurs.ꢀOnceꢀreﬂowꢀoccurs,ꢀtheꢀ

iron should be removed immediately. “Wiping” the edges of a chip

and heating the top surface is not recommended.

Note: All temperatures refer to the center of the package, measured on the

package body surface that is facing up during assembly reﬂow.

*Case Size D, E, P, Y, and X

**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z

T_P

t_P

Maximum Ramp Up Rate = 3ºC/seconds

Maximum Ramp Down Rate = 6ºC/seconds

T_L

t_L

Duringꢀtypicalꢀreﬂowꢀoperations,ꢀaꢀslightꢀdarkeningꢀofꢀtheꢀgold-

colored epoxy may be observed. This slight darkening is normal

and not harmful to the product. Marking permanency is not

affected by this change.

T

smax

T

smin

t_S

25

25ºC to Peak

Time

Construction

T2026_T496_SPACE • 7/19/2013 10

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Capacitor Marking

KEMET

Fused

MnO₂

Polarity

Indicator (+)

S+

Picofarad Code

KEMET ID

227

10 ^K

230

Rated

Voltage

Date

Code *

* 230 = 30^thweek of 2012

Date Code *

1^stdigit = Last number of Year

9 = 2009

0 = 2010

1 = 2011

2 = 2012

3 = 2013

4 = 2014

2^ndand 3^rddigit = Week of the Year

01 = 1^stweek of the Year to

52 = 52^ndweek of the Year

Storage

Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other

environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term

storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may

increase.ꢀKEMETꢀrecommendsꢀthatꢀmaximumꢀstorageꢀtemperatureꢀnotꢀexceedꢀ40ºCꢀandꢀmaximumꢀstorageꢀhumidityꢀnotꢀexceedꢀ60%ꢀ

relativeꢀhumidity.ꢀTemperatureꢀﬂuctuationsꢀshouldꢀbeꢀminimizedꢀtoꢀavoidꢀcondensationꢀonꢀtheꢀpartsꢀandꢀatmospheresꢀshouldꢀbeꢀfreeꢀofꢀ

chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years

of receipt.

T2026_T496_SPACE • 7/19/2013 11

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Tape & Reel Packaging Information

KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in

accordance with EIA Standard 481–1:ꢀEmbossedꢀCarrierꢀTapingꢀofꢀSurfaceꢀMountꢀComponentsꢀforꢀAutomaticꢀHandling.ꢀThisꢀpackagingꢀ

system is compatible with all tape-fed automatic pick-and-place systems.

8 mm (0.315")

or

12 mm (0.472")

180 mm (7.0")

Top Tape Thickness

or

0.10 mm (0.004")

330 mm (13.0")

Maximum Thickness

Table 3 – Packaging Quantity

Tape Width

Case Code

7" Reel*

13" Reel*

(mm)

KEMET

EIA

I

S

T

M

U

L

W

Z

V

A

B

C

D

Y

3216-10

3216-12

3528-12

3528-15

6032-15

6032-19

7343-15

7343-17

7343-20

3216-18

3528-21

6032-28

7343-31

7343-40

7343-43

7360-38

7360-20

8

12

8

3,000

2,500

2,000

1,000

2,000

500

12,000

10,000

8,000

5,000

3,000

9,000

8,000

3,000

2,500

2,000

2,500

8

12

500

X

E/T428P

H

1,000

* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.

T2026_T496_SPACE • 7/19/2013 12

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Figure 1 – Embossed (Plastic) Carrier Tape Dimensions

T

P2

[10 pitches cumulative

tolerance on tape ± 0.2 mm]

2

E

1

Po

ØDo

Ao

F

Ko

W

E

2

B

1

Bo

S

1

P

1

T

1

Embossment

For cavity size,

see Note 1 Table 4

Center Lines of Cavity

ØD

1

Cover Tape

is for tape feeder reference only,

including draft concentric about B

B

1

o

.

User Direction of Unreeling

Table 4 – Embossed (Plastic) Carrier Tape Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

D₁Minimum

Note 1

1.0

R Reference S₁Minimum

Tape Size

8 mm

D₀

E₁

P₀

P₂

T Maximum T₁Maximum

Note 2

Note 3

25.0

(0.984)

(0.039)

1.5ꢀ+0.10/-0.0ꢀ

(0.059ꢀ+0.004/-0.0)

1.75 ±0.10

4.0 ±0.10

2.0 ±0.05

0.600

(0.024)

0.600

(0.024)

0.100

(0.004)

12 mm

16 mm

(0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002)

1.5

(0.059)

30

(1.181)

Variable Dimensions — Millimeters (Inches)

B₁Maximum

Note 4

4.35

(0.171)

8.2

(0.323)

12.1

(0.476)

Tape Size

8 mm

Pitch

E₂Minimum

F

P₁

T₂Maximum W Maximum

A₀,B₀& K₀

6.25

(0.246)

10.25

(0.404)

14.25

3.5 ±0.05

4.0 ±0.10

2.5

(0.098)

4.6

8.3

(0.327)

12.3

Single (4 mm)

(0.138 ±0.002) (0.157 ±0.004)

5.5 ±0.05 8.0 ±0.10

(0.217 ±0.002) (0.315 ±0.004)

5.5 ±0.05 8.0 ±0.10

(0.217 ±0.002) (0.315 ±0.004)

Single (4 mm) &

Double (8 mm)

12 mm

16 mm

Note 5

(0.181)

4.6

(0.484)

16.3

Triple (12 mm)

(0.561)

(0.181)

(0.642)

1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and

hole location shall be applied independent of each other.

2. The tape, with or without components, shall pass around R without damage (see Figure 5).

3. If S₁< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).

4. B₁dimension is a reference dimension for tape feeder clearance only.

5. The cavity deﬁned by A₀, B₀and K₀shall surround the component with sufﬁcient clearance that:

(a) the component does not protrude above the top surface of the carrier tape.

(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.

(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).

(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).

(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.

T2026_T496_SPACE • 7/19/2013 13

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Packaging Information Performance Notes

1. Cover Tape Break Force: 1.0 Kg minimum.

2. Cover Tape Peel Strength: Theꢀtotalꢀpeelꢀstrengthꢀofꢀtheꢀcoverꢀtapeꢀfromꢀtheꢀcarrierꢀtapeꢀshallꢀbe:ꢀ

Tape Width

8 mm

Peel Strength

0.1 to 1.0 Newton (10 to 100 gf)

0.1 to 1.3 Newton (10 to 130 gf)

12 and 16 mm

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°

from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.

3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA

Standards 556 and 624.

Figure 2 – Maximum Component Rotation

°

T

Maximum Component Rotation

Top View

Maximum Component Rotation

Side View

Typical Pocket Centerline

Tape

Maximum

°

T

s

Width (mm) Rotation (

)

8,12

16 – 200

20

10

Bo

Tape

Maximum

°

S

Width (mm) Rotation (

)

8,12

16 – 56

72 – 200

20

10

5

Typical Component Centerline

Ao

Figure 4 – Bending Radius

Figure 3 – Maximum Lateral Movement

Embossed

Carrier

Punched

Carrier

8 mm & 12 mm Tape

16 mm Tape

0.5 mm maximum

1.0 mm maximum

R

Bending

Radius

R

T2026_T496_SPACE • 7/19/2013 14

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Figure 5 – Reel Dimensions

Full Radius,

W3 (Includes

flange distortion

at outer edge)

Access Hole at

Slot Location

(Ø 40 mm minimum)

See Note

W

2 (Measured at hub)

D

(See Note)

A

N

C

(Arbor hole

W

1 (Measured at hub)

diameter)

If present,

tape slot in core

for tape start:

2.5 mm minimum width x

10.0 mm minimum depth

B

(see Note)

Note: Drive spokes optional; if used, dimensions B and D shall apply.

Table 5 – Reel Dimensions

Metric will govern

Constant Dimensions — Millimeters (Inches)

Tape Size

8 mm

A

B Minimum

C

D Minimum

178 ±0.20

(7.008 ±0.008)

or

330 ±0.20

(13.000 ±0.008)

1.5

(0.059)

13.0ꢀ+0.5/-0.2ꢀ

(0.521ꢀ+0.02/-0.008)

20.2

(0.795)

12 mm

16 mm

Variable Dimensions — Millimeters (Inches)

Tape Size

8 mm

N Minimum

W₁

W₂Maximum

W₃

8.4ꢀ+1.5/-0.0

(0.331ꢀ+0.059/-0.0)

12.4ꢀ+2.0/-0.0

(0.488ꢀ+0.078/-0.0)ꢀꢀ

16.4ꢀ+2.0/-0.0

14.4

(0.567)

18.4

(0.724)

22.4

50

(1.969)

Shall accommodate tape width

without interference

12 mm

16 mm

(0.646ꢀ+0.078/-0.0)

(0.882)

T2026_T496_SPACE • 7/19/2013 15

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Figure 6 – Tape Leader & Trailer Dimensions

Embossed Carrier

Carrier Tape

Round Sprocket Holes

Punched Carrier

8 mm & 12 mm only

START

END

Top Cover Tape

Elongated Sprocket Holes

(32 mm tape and wider)

100 mm

Minimum Leader

400 mm Minimum

Trailer

160 mm Minimum

Components

Top Cover Tape

Figure 7 – Maximum Camber

Elongated sprocket holes

(32 mm & wider tapes)

Carrier Tape

Round Sprocket Holes

1 mm Maximum, either direction

Straight Edge

250 mm

T2026_T496_SPACE • 7/19/2013 16

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

KEMET Corporation

World Headquarters

Europe

Asia

Southern Europe

Paris, France

Tel:ꢀ33-1-4646-1006ꢀ

Northeast Asia

Hong Kong

Tel:ꢀ852-2305-1168

2835 KEMET Way

Simpsonville, SC 29681

Sasso Marconi, Italy

Tel:ꢀ39-051-939111

Shenzhen, China

Tel:ꢀ86-755-2518-1306

MailingꢀAddress:

P.O. Box 5928

Greenville, SC 29606

Beijing, China

Central Europe

Tel:ꢀ86-10-5829-1711

www.kemet.com

Landsberg, Germany

Tel:ꢀ49-8191-3350800ꢀꢀ

Tel:ꢀ864-963-6300ꢀ

Fax:ꢀ864-963-6521

Shanghai, China

Tel:ꢀ86-21-6447-0707

Kamen, Germany

Tel:ꢀ49-2307-438110

Corporate Ofﬁces

Fort Lauderdale, FL

Tel:ꢀ954-766-2800

Taipei, Taiwan

Tel:ꢀ886-2-27528585

Northern Europe

Bishop’s Stortford, United Kingdom

Tel:ꢀ44-1279-460122ꢀ

North America

Southeast Asia

Singapore

Southeast

Tel:ꢀ65-6586-1900

Lake Mary, FL

Tel:ꢀ407-855-8886

Espoo, Finland

Tel:ꢀ358-9-5406-5000

Penang, Malaysia

Tel:ꢀ60-4-6430200

Northeast

Wilmington, MA

Tel:ꢀ978-658-1663ꢀ

Bangalore, India

Tel:ꢀ91-806-53-76817

Central

Novi, MI

Tel:ꢀ248-994-1030

West

Milpitas, CA

Tel:ꢀ408-433-9950

Mexico

Guadalajara, Jalisco

Tel:ꢀ52-33-3123-2141ꢀꢀ

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

T2026_T496_SPACE • 7/19/2013 17

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Other KEMET Resources

Tools

Resource

Location

Con ꢀgureꢀAꢀPart:ꢀCapEdge

SPICE & FIT Software

http://capacitoredge.kemet.com

http://www.kemet.com/spice

http://www.kemet.com/keask

http://www.kemet.com:8080/elc

SearchꢀOurꢀFAQs:ꢀKnowledgeEdge

Electrolytic LifeCalculator

Product Information

Resource

Location

Products

Technical Resources (Including Soldering Techniques)

RoHS Statement

http://www.kemet.com/products

http://www.kemet.com/technicalpapers

http://www.kemet.com/rohs

Quality Documents

http://www.kemet.com/qualitydocuments

Product Request

Resource

Location

http://www.kemet.com/sample

http://www.kemet.com/kits

Sample Request

Engineering Kit Request

Contact

Location

Website

Contact Us

Investor Relations

Call Us

www.kemet.com

http://www.kemet.com/contact

http://www.kemet.com/ir

1-877-MyKEMET

Twitter

http://twitter.com/kemetcapacitors

Disclaimer

Allꢀproductꢀspeci ꢀcations,ꢀstatements,ꢀinformationꢀandꢀdataꢀ(collectively,ꢀtheꢀ“Information”)ꢀinꢀthisꢀdatasheetꢀareꢀsubjectꢀtoꢀchange.ꢀTheꢀcustomerꢀisꢀresponsibleꢀforꢀcheckingꢀandꢀ

verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are

notꢀintendedꢀtoꢀconstituteꢀ–ꢀandꢀKEMETꢀspeci ꢀcallyꢀdisclaimsꢀ–ꢀanyꢀwarrantyꢀconcerningꢀsuitabilityꢀforꢀaꢀspeci ꢀcꢀcustomerꢀapplicationꢀorꢀuse.ꢀTheꢀInformationꢀisꢀintendedꢀforꢀuseꢀonlyꢀ

by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still

occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective

circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not

be required.

T2026_T496_SPACE • 7/19/2013 18

Tantalum Surface Mount Capacitors

Fused MnO₂Tantalum Surface Mount Capacitors – T496 Series Fail-Safe Fused Space Grade

Digitally signed by Jeannette Calvo

DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications,

cn=Jeannette Calvo, email=jeannettecalvo@kemet.com

Date: 2013.07.19 15:48:29 -04'00'

T2026_T496_SPACE • 7/19/2013 19

型号:	T496D336K020CT621A
是否Rohs认证：	符合
生命周期：	Active
包装说明：	, 2917
Reach Compliance Code：	compliant
ECCN代码：	EAR99
HTS代码：	8532.21.00.50
风险等级：	5.77
其他特性：	ESR IS MEASURED AT 100KHZ;MIL-PRF-55365;MIL-STD-1580
电容：	33 µF
电容器类型：	TANTALUM CAPACITOR
介电材料：	TANTALUM (DRY/SOLID)
ESR：	400 m Ω
高度：	2.8 mm
JESD-609代码：	e3
漏电流：	0.0066 mA
长度：	7.3 mm
安装特点：	SURFACE MOUNT
多层：	No
负容差：	10%
端子数量：	2
最高工作温度：	125 °C
最低工作温度：	-55 °C
封装形状：	RECTANGULAR PACKAGE
封装形式：	SMT
包装方法：	TR, EMBOSSED PLASTIC, 7 INCH
极性：	POLARIZED
正容差：	10%
额定（直流）电压（URdc）：	20 V
尺寸代码：	2917
表面贴装：	YES
Delta切线：	0.06
端子面层：	Matte Tin (Sn) - with Nickel (Ni) barrier
端子形状：	J BEND
宽度：	4.3 mm
Base Number Matches：	1

电子百科

产品导航

产品型号T496D336K020CT621A的Datasheet PDF文件预览

T496D336K020ATE400相关产品..

T496D336K020ATE400相关文章

IC37:专业IC行业平台