欢迎访问ic37.com |
会员登录 免费注册
发布采购

英飞凌XE164系列MCU开发评估方案

日期:2007-12-14标签: (来源:互联网)
英飞凌XE164系列MCU是XE166系列中一种,16位实时信号控制器,采用受欢迎的C166微控制器架构.XE166基于增强的C166S V2架构,它的性能比现有的16位解决方案要好得多,具有32位的性能.CPU的高性能,增强的I/O性能,灵活的功率管理以及新的外设如通用串行接口(USIC),使得XE166系列广泛应用于伺服驱动,家用电器,HVAC压缩机,步进马达,工业泵,交通以及电源等.本文介绍了XE164系列的主要性能和相应的评估板的主要 性能和电路图.

16Bit SingleChip XE164 Real Time Signal Controller Summary device family with 32bit performance.

High CPU Performance combined with enhanced IO capabilities, flexible power management and instrument Power Supplies, Transportation and Communication.

Integration system cost.The XE164 series is part System integration and scalability with a rich choice devices. 应用:

Servo drives Appliance motors HVAC compressors and blowers Stepper motors Industrial pumps Transportation Power supplies

For a quick overview or reference, the XE164’s properties are listed here in a condensed way. XE164主要性能: High Performance 16bit CPU with 5Stage Pipeline 15 ns Instruction Cycle Time at 66 MHz CPU Clock (SingleCycle Execution) 1Cycle 32bit Addition and Subtraction with 40bit result 1Cycle Multiplication (16 16 bit) 1Cycle MultiplyandAccumulate (MAC) Instructions Background Division (32 ⁄16 bit) in 21 Cycles Enhanced Boolean Bit Manipulation Facilities ZeroCycle Jump Execution

Additional Instructions to Support HLL and Fast Context Switching Support with Two Additional Local Register Banks

16 Mbytes Total Linear Address Space for Code and Data1024 Bytes OnChip Special Function Register Area (C166 Family Compatible) 16PriorityLevel Interrupt System with up to 79 Sources, Selectable External Inputs for Interrupt Generation and WakeUp, SampleRate down to 15 ns8Channel InterruptDriven SingleCycle Data Transfer Facilities via Peripheral Event Controller (PEC), 24Bit Pointers Cover Total Address Space

Clock Generation from Internal Memory Modules 1 Kbyte SRAM (DSRAM) Up to 64 Kbytes Flash Memory)

OnChip Peripheral Modules Two Synchronizable A/D Converters with a total of 16 Channels, 10bit Resolution, Conversion Time down to 1.2 s, Optional Data Preprocessing (Data Reduction,Range Check)

16Channel General Purpose Capture/Compare Unit (CAPCOM2)Up to three Capture/Compare Units for flexible PWM Signal Generation (CCU6x)

MultiFunctional General Purpose Timer Unit with 5 Timers Up to six Serial Interface Channels to be used as UART, LIN, HighSpeed Synchronous Channel (SPI/QSPI), IIC Bus Interface (10bit addressing, 400 kbit/s), IIS InterfaceOnChip MultiCAN Interface (Rev.2.0B active) with up to 128 Message Objects(Full CAN/Basic CAN) on up to 4 CAN Nodes and Gateway FunctionalityOnChip Real Time Clock

Up to 12 Mbytes External Address Space for Code and Data Programmable External Bus Characteristics for Different Address Ranges Multiplexed or Demultiplexed External Address/Data Buses Selectable Address Bus Width16Bit or 8Bit Data Bus Width Four Programmable ChipSelect Signals Single Power Supply from 3.0 V to 5.5 V

Programmable Watchdog Timer and Oscillator Watchdog Up to 75 General Purpose I/O Lines OnChip Bootstrap Loader Supported by a Large Range of Development Tools like CCompilers, Macro Assembler Packages, Emulators, Evaluation Boards, HLLDebuggers, Simulators,

Logic Analyzer Disassemblers, Programming Boards OnChip Debug Support via JTAG Interface 100Pin Green LQFP Package, 0.5 mm (19.7 mil) pitch

图1.XE164方框图.

图2.CPU方框图 XE164详情请见:

http://www.infineon.com/dgdl/xe164x_ds_v01_2007_10.pdf?folderId=db3a3043156fd5730115b3a665650d23&fileId=db3a3043156fd57301161007ff671b4d013

XE166 family Easy Kit开发板

2.1主要特性: –Infineon’s XE166 Controller in TQFP144/100 Package –High Speed CAN Transceivers, LIN Transceiver, USB to UART/JTAG bridge –8 Low Power Status LEDs –Easy access to all pins –4DIP switches for configuration –On board USB to JTAG ⁄UART interface –Powered via USB 连接器: The XE166 Easy Kit offers a wide variety of connectors: –One USB connector for ASC0 Interface via virtual COM port, JTAG (OCDS Level 1) and Power Supply –4 pin header for LIN Transceiver –16pin header for JTAG interface (OCDS) –10pin (2x5) Header for CAN High Speed Transceiver (CAN1/CAN2) 元件:–LowDrop Voltage Regulator TLE 4274 –Step Down Voltage Regulator TLE 6365G (optional) –Four status LED´s for Power ⁄RESET ⁄JTAG ⁄DEBUG RUN –2 x CANTransceiver TLE 6251 –LIN Transceiver TLE 7259 –FT2232 Dual USB to UART/JTAG interface= –SPI EEPROM 128 Kbit AT25128N.html" target="_blank" title="AT25128N">AT25128N –8 general purpose LEDs –Potentiometer for ADC0/1 –Reset switch

电路图

图4.XE166 Easy Kit电路图